Thermal Grizzly – Koelpasta en koeloplossingen voor pc's

The electrically non-conductive Minus Pad Advanced thermal pads are part of the Minus Pad Basic, Advance, and Pro series. Based on the proven minus pad 8, this series has been specifically further developed to significantly improve thermal conductivity, compressibility, and price-performance ratio. The thermal pads are suitable for SSDs, GPU coolers, GPU water coolers, as well as electronic components such as voltage regulators and memory modules.

• Excellent thermal conductivity


• High compressibility


• Easy to use


• Electrically non-conductive

Comparison of the Minus Pad Basic-, Advance-, and Pro series:

• Minus Pad Basic: Good thermal conductivity, slightly lower compressibility, and excellent price-performance ratio.


• Minus Pad Advance: Improved thermal conductivity, higher compressibility.


• Minus Pad Pro: Outstanding thermal conductivity and exceptional compressibility – at a slightly higher Price.
   

GPU power monitoring device measures and records graphics card power through the 12VHPWR connector, displays real-time watts/volts/amps on an OLED, detects connector type, monitors temperatures and issues an audible alarm for over-current, over-temperature or misconnected/incorrect cables.

Designed for in-line measurement, the WireView Pro GPU connects between the graphics card and the PSU to log power usage with a 60-second averaging mode and to detect power peaks and incorrect cable specifications.

• OLED display showing current W, V, A, min/max, 60s average (RAVG) and total energy (Wh)


• Records power consumption for analysis and comparison, with a special 60-second measurement cycle


• Connector detection for 150 W / 300 W / 450 W / 600 W specified cables


• Internal temperature sensors at the power connectors plus two external 10K NTC sensors (5 cm and 20 cm included)


• Audible buzzer with adjustable temperature and current limits; warns on incorrect or loose cable connections


• Available in Normal and Reverse 12VHPWR orientations and connects to the PSU via the power cable

Be aware that the WireView PCB and connectors can become very hot during use—up to about 60°C with air-cooled cards and up to 100°C with water-cooled cards without airflow—so allow it to cool before handling.

The PhaseSheet PTM is a thermal pad based on a phase change material (PCM). The pads, which are solid at room temperature, can be easily applied and liquefy during operation, allowing them to effectively dissipate heat like a thermal paste. PhaseSheet PTM is electrically non-conductive and can therefore be used in many areas, with the primary application being in processors and graphics chips.

Aeronaut thermal grease is the ideal beginner's product with high effectiveness. Great surface protection, as well as good heat transfer capabilites make Aeronaut the ideal choice for users who want to optimize their cooling solution in an effective way, or maybe want to use an alternative to the thermal grease included with their hardware, with a remarkable cost effectiveness to boot.

• very good thermal conductivity
• long-term durability
• no curing
• no electrical conductivity

CPU contact sealing frame, rood/zwart, zwart

Thermal Grizzly Duronaut is a high-performance thermal paste designed for excellent heat transfer and long-term stability.

Key features:
✔ Extremely durable
✔ High thermal conductivity
✔ Non-conductive & safe for electronics

Package includes:

1x Duronaut thermal paste 6g
1x Applicator
1x TG Spatula
1x TG Spatula Pro
 

Thermal pad with extremely high thermal conductivity and outstanding compressibility, electrically non-conductive and easy to apply for efficient heat transfer in electronic components.

The Minus Pad Pro builds on the proven Minus Pad 8 to deliver improved thermal performance and surface conformity, making it suitable for SSDs, GPU coolers, water-cooling blocks, voltage regulators and memory modules.

• Excellent thermal conductivity


• Outstanding compressibility for better surface contact


• Electrically non-conductive


• Easy to use and install


• Designed for use with SSDs, GPUs, water coolers and electronic components


• Part of the Minus Pad Basic, Advance and Pro series; further developed from Minus Pad 8

Gray material adapts to uneven surfaces to improve contact between components and heatsinks for more reliable heat transfer.

TG Cleaning Wipes are cleaning cloths for cleaning surfaces so that thermal conductive materials such as thermal pastes or liquid metal can adhere well and thus develop their full thermal conductivity. Assembly aids such as the TG Kapton Insulation Sheet or the TG Shield protective coating also adhere better to cleaned surfaces. TG Cleaning Wipes are packaged as a practical complete set of 10 cleaning cloths.

CPU contact frame for LGA 1851 (Intel 200 series). Can help improve cooling performance with better contact between CPU and cooler.

 Included in the package:

• 1x Intel 1851 CPU Contact Frame V1
• 4x Cylinder head screws with 3/8" UNC threads
• 1x 5/64" hex key
• 1x Torx T20 key

Thermal putty acts as an electrically non-conductive, flexible gap filler for replacing thermal pads on GPUs and compensates height differences from 0.2 mm to 3.0 mm while remaining easy to apply.

The TG Putty line is available in three variants with differing thermal conductivity and is supplied with spatulas to enable straightforward, large-area application.

• Electrically non-conductive alternative to conventional thermal pads


• Compensates gaps from 0.2–3.0 mm


• Three variants: Basic (medium), Advance (good), Pro (excellent) thermal conductivity


• Includes three spatulas for application


• Operating temperature range −40°C to +120°C


• Not suitable for use on processors (IHS or Direct Die) or directly on the GPU die


• Apply only to clean, degreased surfaces (e.g., TG Cleaning Wipes or isopropanol)

Suited for replacing VRAM and VRM pads on single and larger graphics cards and for converting coolers to GPU water cooling setups.

Thermal putty is an electrically non-conductive, flexible gap filler that replaces conventional thermal pads on GPUs and bridges height differences from 0.2 to 3.0 mm.

Formulated for GPU modifications, TG Putty is easy to shape for precise contact with VRAM and SMD components and can be applied broadly with a spatula or formed by hand.

• Electrically non-conductive alternative to thermal pads


• Fills gaps from 0.2 to 3.0 mm for consistent contact


• Apply with spatulas or by hand (gloves recommended)


• Available in variants with different thermal conductivities


• Operating range −40°C to +120°C


• Not suitable for use on processors (IHS or direct die) or directly on the GPU die

Easy to shape and tailor-made for memory and voltage-regulator contacts, it simplifies GPU pad replacement and cooler modifications.

Device for measuring and monitoring graphics card power consumption via the 12VHPWR connector with OLED readout, connector detection, temperature sensors and an audible alarm.

The WireView Pro GPU connects between the graphics card and the power supply to display and record volts, amps and watts on an OLED screen while detecting cable specification and issuing warnings for incorrect connections, overcurrent or overheating.

• Displays current power (W), voltage (V), current (A), min/max, 60‑second average (RAVG) and total energy (Wh)


• Measures and records power only through the 12VHPWR power connector (does not measure via the motherboard PCIe slot)


• Connector detection for 150W / 300W / 450W / 600W cable specs; available in Normal and Reverse pin orientations


• Internal temperature sensors at the power connectors plus two external 10K NTC sensors with 5 cm and 20 cm cables


• Audible buzzer alerts for incorrect cables/connections, exceeded temperature limits or adjustable current limits


• Aluminum housing with optimized cable management and an OLED for quick, review‑friendly measurements

Useful for assessing GPU power use and detecting power peaks on high‑power cards; the device can become very hot during operation, so avoid touching the casing and allow it to cool after shutdown.

Thermische pasta, ontworpen voor Overclocking, 14.2 W/m*K thermische geleidbaarheid, geen uitharding nodig, 2 gram

High-end thermal paste. Kryonaut thermal grease was created especially for the extremely demanding applications and the highest expectations of the overclocking community. Kryonaut is also highly recommended as a top product for critical cooling systems in the industrial environment.

• Designed for Overclocking
• Excellent thermal conductivity
• No curing
• Long-term durability
• No electrical conductivity!

Kryonaut uses a special structure, which halts the drying out process at temperatures of up to 80° Celsius. This structure is also responsible for the nano-aluminum- and zinc-oxide-parts included in the grease to compound optimally, to compensate for unevenness of the component (i.e. the CPU) or the heat sink, thus achieving remarkable heat transfer.
 

Thermal putty that serves as an electrically non-conductive, flexible gap filler for replacing thermal pads on GPUs and compensates for height differences from 0.2 to 3.0 mm.

TG Putty is easy to apply with the supplied spatulas or by hand (gloves recommended) and is available in Basic, Advance and Pro variants that differ by thermal conductivity.

• Electrically non-conductive alternative to conventional thermal pads


• Fills gaps from 0.2–3.0 mm for VRAM, VRM and SMD components


• Apply broadly with spatulas or shape into small pellets for precise placement


• Not suitable for use on processors (IHS or Direct Die) or directly on the GPU die


• Operating temperature range −40°C to +120°C


• Advance variant includes three spatulas for application

Designed for GPU modifications and cooler conversions, it adapts to varied factory pad thicknesses for tailored thermal contact.

Vloeibare metaalkoelpasta, zilverpasta, dichtheid: 6,29 g/cm³, bedrijfstemperatuur: -50 - 200° C, 1 gram

The graphene thermal pads of the Thermal Grizzly KryoSheet series can be used as an excellent alternative for thermal compounds from the higher performance segment. Similar to Carbonaut pads, they have a conformable surface with very high thermal conductivity. Compared to Carbonaut pads, KryoSheet as a high-end product offers significantly higher thermal conductivity.

This increased thermal conductivity is not only due to the choice of material, but also to the innovative manufacturing process. KryoSheet does not contain any liquid components and is therefore not subject to normal ageing as is the case with traditional thermal paste. Drying out is not possible.

• Outstanding thermal conductivity
• Easy to use
• Consistently high performance
• Extreme durability

Attention: Electrically conductive! Follow instructions!

GPU power monitoring device measures and records graphics card power through the 12VHPWR connector, displays real-time watts/volts/amps on an OLED, detects connector type, monitors temperatures and issues an audible alarm for over-current, over-temperature or misconnected/incorrect cables.

Designed for in-line measurement, the WireView Pro GPU connects between the graphics card and the PSU to log power usage with a 60-second averaging mode and to detect power peaks and incorrect cable specifications.

• OLED display showing current W, V, A, min/max, 60s average (RAVG) and total energy (Wh)


• Records power consumption for analysis and comparison, with a special 60-second measurement cycle


• Connector detection for 150 W / 300 W / 450 W / 600 W specified cables


• Internal temperature sensors at the power connectors plus two external 10K NTC sensors (5 cm and 20 cm included)


• Audible buzzer with adjustable temperature and current limits; warns on incorrect or loose cable connections


• Available in Normal and Reverse 12VHPWR orientations and connects to the PSU via the power cable

Be aware that the WireView PCB and connectors can become very hot during use—up to about 60°C with air-cooled cards and up to 100°C with water-cooled cards without airflow—so allow it to cool before handling.

The AM5 High Performance Heatspreader is an upgrade for AMD's Ryzen 7000 CPUs. The heatspreader's precision diamond-milled nickel-plated copper surface provides 240% more surface area. As a result, the AM5 heatspreader allows for maximum heat dissipation with air and water coolers.

Processor koelpasta, zilver

The graphene thermal pads of the Thermal Grizzly KryoSheet series can be used as an excellent alternative for thermal compounds from the higher performance segment. Similar to Carbonaut pads, they have a conformable surface with very high thermal conductivity. Compared to Carbonaut pads, KryoSheet as a high-end product offers significantly higher thermal conductivity.

This increased thermal conductivity is not only due to the choice of material, but also to the innovative manufacturing process. KryoSheet does not contain any liquid components and is therefore not subject to normal ageing as is the case with traditional thermal paste. Drying out is not possible.

• Outstanding thermal conductivity
• Easy to use
• Consistently high performance
• Extreme durability

Attention: Electrically conductive! Follow instructions!

Thermal pads with improved thermal conductivity, high compressibility and electrical insulation for effective heat transfer on SSDs, GPU coolers and electronic components.

The Minus Pad Advance pads are easy to use and were developed from the Minus Pad 8 to deliver improved thermal conductivity and higher compressibility.

• Excellent thermal conductivity


• High compressibility for better surface contact


• Electrically non-conductive


• Suitable for SSDs, GPU coolers, GPU water coolers, voltage regulators and memory modules


• Improved price-performance ratio

Designed to provide reliable heat transfer and gap filling across a range of PC and electronic cooling applications.

Solid state drive (SSD) heatsink, M.2 2280, zwart

CPU contact frame voor Intel 13th gen Intel Raptor Lake & 14th gen Raptor Lake-S, kan helpen bij het verbeteren van de koelprestaties met beter contact tussen CPU en koeler - bekijk alstublieft de installatievideo voordat u installeert

Thermal pad levert hoge compressie, zeer hoge samendrukbaarheid en thermische geleidbaarheid in een elektrisch niet-geleidend ontwerp voor eenvoudige installatie.

Thermal Grizzly Minus Pad High Compression is ontworpen voor pc-enthousiastelingen en modders die een flexibel pad nodig hebben dat betrouwbaar hoogteverschillen tussen componenten compenseert zonder ingewikkelde metingen, en op maat kan worden gesneden voor een breed scala aan builds.

• Hoge samendrukbaarheid helpt hoogteverschillen te compenseren wanneer de exacte speling onbekend is
• Uitstekende thermische geleidbaarheid ondersteunt efficiënte warmte-uitwisseling
• Elektrisch niet-geleidend om kortsluiting in gevoelige elektronica te helpen voorkomen
• Veelzijdig inzetbaar voor SSD’s, laptops, VRM’s en grafische kaarten

Ideaal voor praktische koelupgrades waar tolerantie, veiligheid en eenvoudige verwerking belangrijk zijn.