Productnummer: 3352541

Thermal Grizzly Putty Basic 30 g - Thermische pasta

Thermal putty acts as an electrically non-conductive, flexible gap filler for replacing thermal pads on GPUs and compensates height differences from 0.2 mm to 3.0 mm while remaining easy to apply.


The TG Putty line is available in three variants with differing thermal conductivity and is supplied with spatulas to enable straightforward, large-area application.



  • Electrically non-conductive alternative to conventional thermal pads

  • Compensates gaps from 0.2–3.0 mm

  • Three variants: Basic (medium), Advance (good), Pro (excellent) thermal conductivity

  • Includes three spatulas for application

  • Operating temperature range −40°C to +120°C

  • Not suitable for use on processors (IHS or Direct Die) or directly on the GPU die

  • Apply only to clean, degreased surfaces (e.g., TG Cleaning Wipes or isopropanol)


Suited for replacing VRAM and VRM pads on single and larger graphics cards and for converting coolers to GPU water cooling setups.

Goedkoopste privé verzending 6,99 €
10 stks Op voorraad - 2-3 werkdagen levertijd

Thermal Grizzly Putty is an electrically non-conductive alternative to traditional thermal pads, specifically designed for GPU modifications and the replacement of thermal pads between the PCB and the cooler.

TG Putty is an electrically non-conductive alternative to conventional thermal pads. As an easy-to-apply and flexible gap filler, it compensates for height differences, making it ideal as a replacement for thermal pads on GPUs. Graphics cards typically feature several types of thermal pads of varying thicknesses from the factory, requiring different pads during replacement or when converting the cooler to a GPU water cooler.

TG Putty can be applied using the included spatulas or by hand (gloves recommended). The spatula allows for broad application, while by hand, it can be shaped into small pellets tailored to the surface size (e.g., VRAM, SMD). TG Putty can fill height differences ranging from 0.2 to 3.0 mm.

TG Putty is available in three variants, primarily differing in their thermal conductivity:

- TG Putty Basic: Medium thermal conductivity
- TG Putty Advance: Good thermal conductivity
- TG Putty Pro: Excellent thermal conductivity
For modifying a single, smaller graphics card without an active backplate (e.g., GeForce GTX 1060), approximately one 30-gram container of TG Putty is required. For larger graphics cards, such as a GeForce RTX 4090, one 30-gram container is generally sufficient for the memory (VRAM) and voltage regulators (VRM) on the front side. On the backside, there is often a uniform, larger gap between the PCB and the backplate on larger graphics cards. In this case, approximately two 30-gram containers are needed to completely fill this gap.

Notes:
TG Putty is not suitable for use on processors (IHS or Direct Die) or directly on the GPU die!

Before application, the target surface should be thoroughly cleaned and degreased, for example, using TG Cleaning Wipes or conventional isopropanol.

Scope of Delivery
- Thermal Putty Advanced
- 3x Spatulas

CPU koeler

Case accessoires

Producent
Productnummer
3352541
Model
TG-P-B-030-R
EAN
4260711991196
Naar de website van de producent
Soort
Koelpasta
Kleur van het product
Zwart, Roze
Gewicht
30 g
Aantal per verpakking
1 stuk(s)
Schraper
Ja
Breedte verpakking
87 mm
Diepte verpakking
71 mm
Hoogte verpakking
47 mm
Gewicht verpakking
58 g
Type verpakking
Polybag

Kenmerken

Soort
Koelpasta
Kleur van het product
Zwart, Roze

Gewicht en omvang

Gewicht
30 g

Verpakking

Aantal per verpakking
1 stuk(s)
Schraper
Ja
Breedte verpakking
87 mm
Diepte verpakking
71 mm
Hoogte verpakking
47 mm
Gewicht verpakking
58 g
Type verpakking
Polybag

Bovenstaande specificaties en vermeldingen kunnen zonder voorafgaande kennisgeving door de fabrikant worden gewijzigd. Sommige teksten kunnen automatisch of machinaal zijn gegenereerd en daardoor misleidende teksten opleveren.