Thermal Grizzly CPU koeler

The Intel High Performance Heatspreader V1 is an upgrade heatspreader for Intel processors. The nickel-plated copper heatspreader has a 207 percent larger, diamond-milled precision surface. This increased surface area compared to the original heatspreader enables maximum heat dissipation for air and water coolers, while the precision milling ensures extremely low surface roughness for the best contact with the heat sink.

The Intel High Performance Heatspreader V1 is compatible with the following processors:

Intel 12th Gen CPUs
Intel 13th Gen CPUs
Intel 14th Gen CPUs (200s)

Scope of delivery

1x Intel High Performance Heatspreader V1
4x pan-head screws UNC thread 3/8"
1x hexagon socket wrench 5/64"
1x angle wrench Torx T20
 

Water cooler optimized for Intel LGA1851 direct-die mounting with a nickel-plated copper microfin cold plate, low-flow-resistance jet channels and integrated RGB lighting.

The Intel 1851 Mycro Direct-Die Pro RGB V1 is designed to sit directly on a delidded Intel CPU to send heat straight into the water loop, with an acrylic-and-aluminum cover and controllable ARGB illumination.

• Direct-die installation for LGA1851 CPUs — requires removal of the ILM and CPU heatspreader; delidding is at your own risk


• Nickel-plated copper cold plate with microfins and a jet system, engineered for low flow resistance


• Acrylic layer tempered after milling to prevent stress cracks beneath the anodized aluminum lid


• Digital aRGB LEDs under the lid, controllable via a 3-pin ARGB header (+5V/DATA/GND); LEDs also illuminate the G1/4 fittings


• G1/4-inch female threading for standard fittings


• Tested with KryoSheet and thermal pads — additional pad thickness affected contact pressure and showed no significant temperature improvements

Built for users who want a compact direct cooling path from the CPU die into a water loop while retaining customizable RGB lighting.

Thermal pads provide improved thermal conductivity and high compressibility for efficient heat transfer in SSDs, GPU coolers, water coolers and other electronic components.

The electrically non-conductive Minus Pad Advance builds on the proven Minus Pad 8 design and was developed to improve thermal conductivity and compressibility while remaining easy to use.

• Excellent thermal conductivity


• High compressibility for uneven surfaces


• Easy to apply and handle


• Electrically non-conductive


• Suitable for SSDs, GPU coolers, GPU water coolers, voltage regulators and memory modules

Designed for straightforward installation, these pads help maintain effective thermal contact across a range of PC and electronics cooling applications.

The electrically non-conductive Minus Pad Advanced thermal pads are part of the Minus Pad Basic, Advance, and Pro series. Based on the proven minus pad 8, this series has been specifically further developed to significantly improve thermal conductivity, compressibility, and price-performance ratio. The thermal pads are suitable for SSDs, GPU coolers, GPU water coolers, as well as electronic components such as voltage regulators and memory modules.

• Excellent thermal conductivity


• High compressibility


• Easy to use


• Electrically non-conductive

Comparison of the Minus Pad Basic-, Advance-, and Pro series:

• Minus Pad Basic: Good thermal conductivity, slightly lower compressibility, and excellent price-performance ratio.


• Minus Pad Advance: Improved thermal conductivity, higher compressibility.


• Minus Pad Pro: Outstanding thermal conductivity and exceptional compressibility – at a slightly higher Price.
   

Thermal putty acts as an electrically non-conductive, flexible gap filler for replacing thermal pads on GPUs and compensates height differences from 0.2 mm to 3.0 mm while remaining easy to apply.

The TG Putty line is available in three variants with differing thermal conductivity and is supplied with spatulas to enable straightforward, large-area application.

• Electrically non-conductive alternative to conventional thermal pads


• Compensates gaps from 0.2–3.0 mm


• Three variants: Basic (medium), Advance (good), Pro (excellent) thermal conductivity


• Includes three spatulas for application


• Operating temperature range −40°C to +120°C


• Not suitable for use on processors (IHS or Direct Die) or directly on the GPU die


• Apply only to clean, degreased surfaces (e.g., TG Cleaning Wipes or isopropanol)

Suited for replacing VRAM and VRM pads on single and larger graphics cards and for converting coolers to GPU water cooling setups.

Thermal pads with improved thermal conductivity, high compressibility and electrical insulation for effective heat transfer on SSDs, GPU coolers and electronic components.

The Minus Pad Advance pads are easy to use and were developed from the Minus Pad 8 to deliver improved thermal conductivity and higher compressibility.

• Excellent thermal conductivity


• High compressibility for better surface contact


• Electrically non-conductive


• Suitable for SSDs, GPU coolers, GPU water coolers, voltage regulators and memory modules


• Improved price-performance ratio

Designed to provide reliable heat transfer and gap filling across a range of PC and electronic cooling applications.

High-end thermal paste. Kryonaut thermal grease was created especially for the extremely demanding applications and the highest expectations of the overclocking community. Kryonaut is also highly recommended as a top product for critical cooling systems in the industrial environment.

• Designed for Overclocking
• Excellent thermal conductivity
• No curing
• Long-term durability
• No electrical conductivity!

Kryonaut uses a special structure, which halts the drying out process at temperatures of up to 80° Celsius. This structure is also responsible for the nano-aluminum- and zinc-oxide-parts included in the grease to compound optimally, to compensate for unevenness of the component (i.e. the CPU) or the heat sink, thus achieving remarkable heat transfer.
 

Vloeibare metaalkoelpasta, zilverpasta, dichtheid: 6,29 g/cm³, bedrijfstemperatuur: -50 - 200° C, 1 gram

Thermal Grizzly TG Shield is een hoge temperatuur conformal coating om componenten te beschermen tegen kortsluitingen door vloeibaar metaal. TG Shield droogt snel voor snelle toepassing en biedt betrouwbare bescherming van PC-componenten in combinatie met vloeibaar metaal.

Thermische pad Thermal Grizzly Minus Pad 8 is een roze 2-pack koelaccessoire met 8 W/m-K thermische geleidbaarheid voor GPU-, M.2 SSD- en VRM-warmteafvoer.

Het is ontworpen om kieren te overbruggen tussen warmteproducerende elektronische componenten en koelblokken of koeloppervlakken, met een keramisch-siliconencomplex met nano-aluminiumoxide.

• Elektrisch niet-geleidend materiaal
• Geschikt voor GPU-koelblokken, M.2 SSD-koelblokken en VRM-koeling
• Bedrijfstemperatuurbereik van -100 °C tot +250 °C
• RoHS-conform ontwerp

Betrouwbare ondersteuning voor warmteoverdracht helpt je koelsysteem effectief te werken waar componenten en koelblokken goed contact nodig hebben.

Thermal putty that serves as an electrically non-conductive, flexible gap filler for replacing thermal pads on GPUs and compensates for height differences from 0.2 to 3.0 mm.

TG Putty is easy to apply with the supplied spatulas or by hand (gloves recommended) and is available in Basic, Advance and Pro variants that differ by thermal conductivity.

• Electrically non-conductive alternative to conventional thermal pads


• Fills gaps from 0.2–3.0 mm for VRAM, VRM and SMD components


• Apply broadly with spatulas or shape into small pellets for precise placement


• Not suitable for use on processors (IHS or Direct Die) or directly on the GPU die


• Operating temperature range −40°C to +120°C


• Advance variant includes three spatulas for application

Designed for GPU modifications and cooler conversions, it adapts to varied factory pad thicknesses for tailored thermal contact.

The PhaseSheet PTM is a thermal pad based on a phase change material (PCM). The pads, which are solid at room temperature, can be easily applied and liquefy during operation, allowing them to effectively dissipate heat like a thermal paste. PhaseSheet PTM is electrically non-conductive and can therefore be used in many areas, with the primary application being in processors and graphics chips.

CPU Contact Frame improves cooling by shifting contact pressure to the edges, preventing IHS concavity and enabling better cooler contact on Intel LGA1700 sockets.

The Thermal Grizzly CPU Contact Frame Intel 1700 LT is the injection-molded "Lite" mounting frame made from ABS reinforced with 15% glass fiber that replaces the standard ILM to increase contact surface and simplify installation.

• Injection-molded ABS with 15% glass fiber for added stability


• Inner contour shifts pressure from centre to edges to avoid concave IHS


• Designed for Intel LGA1700; compatible with 12th, 13th and 14th Gen CPUs


• Only for CPUs whose IHS has been ground down by no more than 0.2 mm


• Includes 4 pan-head screws (UNC 3/8"), 5/64" hex socket wrench and Torx T20 angle wrench

Simple installation and improved cooler contact can lead to noticeably lower CPU temperatures depending on the cooler and processor.

Thermal Grizzly Duronaut is a high-performance thermal paste designed for excellent heat transfer and long-term stability.

Key features:
✔ Extremely durable
✔ High thermal conductivity
✔ Non-conductive & safe for electronics

Package includes:

1x Duronaut thermal paste 6g
1x Applicator
1x TG Spatula
1x TG Spatula Pro
 

The graphene thermal pads of the Thermal Grizzly KryoSheet series can be used as an excellent alternative for thermal compounds from the higher performance segment. Similar to Carbonaut pads, they have a conformable surface with very high thermal conductivity. Compared to Carbonaut pads, KryoSheet as a high-end product offers significantly higher thermal conductivity.

This increased thermal conductivity is not only due to the choice of material, but also to the innovative manufacturing process. KryoSheet does not contain any liquid components and is therefore not subject to normal ageing as is the case with traditional thermal paste. Drying out is not possible.

• Outstanding thermal conductivity
• Easy to use
• Consistently high performance
• Extreme durability

Attention: Electrically conductive! Follow instructions!

The AM5 High Performance Heatspreader is an upgrade for AMD's Ryzen 7000 CPUs. The heatspreader's precision diamond-milled nickel-plated copper surface provides 240% more surface area. As a result, the AM5 heatspreader allows for maximum heat dissipation with air and water coolers.

The Delid-Die-Mate Intel 13th Gen is a tool for removing the heat spreader ("delidden") on Intel processors for socket LGA1700. By removing the heat spreader, the CPUs can be cooled via "direct die", for example. With the so-called "direct die", the CPU cooler is mounted directly on the processor chip. By omitting the heat spreader in the cooling circuit, a significantly optimised heat transfer from the die to the CPU cooler is possible.

Processor koelpasta, zilver

Thermische plaat, thermische geleidbaarheid: 8 W (mK), 100 x 100 x 1,5 mm, verpakking van 1 stuk

The electrically non-conductive Minus Pad Advanced thermal pads are part of the Minus Pad Basic, Advance, and Pro series. Based on the proven minus pad 8, this series has been specifically further developed to significantly improve thermal conductivity, compressibility, and price-performance ratio. The thermal pads are suitable for SSDs, GPU coolers, GPU water coolers, as well as electronic components such as voltage regulators and memory modules.

• Excellent thermal conductivity


• High compressibility


• Easy to use


• Electrically non-conductive

Comparison of the Minus Pad Basic-, Advance-, and Pro series:

• Minus Pad Basic: Good thermal conductivity, slightly lower compressibility, and excellent price-performance ratio.


• Minus Pad Advance: Improved thermal conductivity, higher compressibility.


• Minus Pad Pro: Outstanding thermal conductivity and exceptional compressibility – at a slightly higher Price.
   

Thermische pasta, ontworpen voor Overclocking, 14.2 W/m*K thermische geleidbaarheid, geen uitharding nodig, 2 gram

Thermische plaat, thermische geleidbaarheid: 8 W (mK), 100 x 100 x 1 mm, verpakking van 1 stuk

Grease spatula (pak van 3)

The graphene thermal pads of the Thermal Grizzly KryoSheet series can be used as an excellent alternative for thermal compounds from the higher performance segment. Similar to Carbonaut pads, they have a conformable surface with very high thermal conductivity. Compared to Carbonaut pads, KryoSheet as a high-end product offers significantly higher thermal conductivity.

This increased thermal conductivity is not only due to the choice of material, but also to the innovative manufacturing process. KryoSheet does not contain any liquid components and is therefore not subject to normal ageing as is the case with traditional thermal paste. Drying out is not possible.

• Outstanding thermal conductivity
• Easy to use
• Consistently high performance
• Extreme durability

Attention: Electrically conductive! Follow instructions!

CPU contact frame voor Intel 13th gen Intel Raptor Lake & 14th gen Raptor Lake-S, kan helpen bij het verbeteren van de koelprestaties met beter contact tussen CPU en koeler - bekijk alstublieft de installatievideo voordat u installeert