Bosch Gereedschap - pagina 23

The fine wire staples fit staplers from the following brands: AEG, Arrow, Black+Decker, Bosch, Esco, kwb, Maestri, Mekano, Metabo, Neckermann/Bullcraft Novus Outifrance Piranha Rocagraf Stanley Skil and Wolfcraft. The fine wire staples type 53 are ideal for a multitude of general DIY tasks and professional stapling jobs. They are suitable for a wide range of thin materials such as fabrics paper flat wooden mouldings and wire mesh fencing. In addition the staples are particularly suitable for applications where the staple back should not be pressed into the material. The staples have a narrow back that allows them to penetrate deeply into the material providing good grip with a very discreet staple back

The narrow-backed staples fit staplers from the following brands: AEG, Bosch, Black+Decker, Bukama, Esco, kwb, Metabo, Novus and Wolfcraft. The narrow-backed staples type 55 are plastic-coated to achieve an adhesive effect that provides a strong and long-lasting hold in a range of different materials. This makes them ideal for both DIY tasks and professional purposes such as installing wall and ceiling cladding with joint and profile board brackets. The staples also have a narrow back that allows them to penetrate deeply into the material and provide a good hold with a very discreet staple back. They are particularly suitable for stapling thin materials where the staple back must not be pressed into the material

Bosch 2 608 000 189 sander accessory 1 pc(s)

Bosch 2 608 000 204 sander accessory 1 pc(s) Sanding sheet

Safety instruction: Only use Bosch hot air guns with electronic regulation. The welding shoe for the hot air gun is a nozzle with a side channel for supplying plastic welding wire with a diameter of up to 5 mm. It must be used in combination with a narrowing nozzle with a diameter of 9 mm.
Welding shoe
with side channel for supplying plastic welding wire up to Ø 5 mm. In connection with narrowing nozzle Ø 9 mm

It is intended for use on planers. The polishing pad is intended for pre-polishing dirty or scratched lacquered surfaces using polish or abrasive paste

The water collector collects the water from the borehole. Therefore, it prevents dirt and water damage when used with a universal vacuum cleaner. It is available in two versions: one for the S 500 drilling stand and one for the S 500 A Professional drilling stand with a core drill diameter of up to 92 mm.
Water collection for drilling stand GCR 180 Professional
Max. core drill diameter 132 mm

The Bosch 2609255305 Connecting Dowel Set is an excellent choice for anyone looking to assemble furniture quickly and efficiently. Thanks to its high-quality workmanship and carefully selected components, this set is suitable for both home and professional projects.

The dowel pin is made of beech wood. The dowel pin is professional dowel accessory. This sturdy and user-friendly accessory prevents rotation thanks to its ribbed design. The dowel is suitable for all round wooden dowel joints and comes in diameters of 6, 8, and 10 mm

It is compatible with SDS max shaft systems. The SDS max flat chisel can be used for standard chiseling for various demolition tasks in concrete and bricks. Good material removal for lighter tasks is made possible by the flat cutting edge. The chisel is intended for use in tasks such as grooving, demolition, and fitting work as well as renovation of joints and clearing of reinforcements.
SDS max flat chisel
SDS max flat chisel for standard chiseling for various demolition tasks in concrete and bricks

Polishing bonnet, for varnish, 2 pieces, 160 mm

Expert for Inox cutting disc provides efficient cutting in Inox with maximum safety. The disc is made of first-class hard aluminum oxide with functional fillers and additives that reduce the heat generated during cutting. This provides high-quality surface results and ensures a long lifespan for the disc. Additionally, the disc does not contain iron, sulfur or chlorine-containing fillers. Maximum work safety is ensured with precision-produced fiberglass mesh. Use this disc for cutting Inox. Bosch cutting discs comply with maximum safety requirements according to EN 12413, FEPA and oSa standards. The disc is compatible with angle grinders.
Straight

Pack of 50 Bosch flat dowels

Precise alignment made easy

Designed for all Bosch hot air guns. The nozzle for the hot air gun provides a wide distribution of hot air on a surface for drying, paint removal or thawing.
Nozzle with wide distribution of hot air for drying, paint removal, thawing

Zaagblad, voor cellenbeton, lengte: 225 mm, breedte: 19 mm

Depth stop Basic provides precise cutting depth in combination with segment saw blades (e.g. when replacing individual parquet elements). It has a 4-step adjustment for precise indication of the limits of the cutting depth. Designed for use on all materials. Cutting depths for segment saw blades with a diameter of 85 mm: Cutting depths of 8, 10, 12 and 14 mm for segment saw blades with a diameter of 100 mm: 14,16,18,20 mm This depth stop is suitable for use with all Starlock-, Starlock Plus- and Starlock Max-tools as well as common multi-tools from Bosch.
Depth stop Basic
Four-step setting
For precise cutting depths together with segment saw blades Ø85mm and Ø100mm (e.g. when replacing individual parquet elements)
Cutting depths for segment saw blades Ø85mm:8,10,12,14mm
Cutting depths for segment saw blades Ø100mm:13 ,15 ,17 ,19 mm

Schuurband

The handle makes it safe to work with a hammer drill.
Handles for hammer drills

Designed for Bosch air compressor. This charging kit consists of an air hose, a sealing nut, a rubber seal and a valve for balls, bicycles and air mattresses.
Accessory kit
Consists of air hose, sealing nut, rubber seal, valve for balls, bicycles and air mattresses

The set's blades are designed for bayonet saws with a universal shaft system. Bayonet saw blade set for metal, Tough Box, 20 pieces, is the universal choice for efficient cutting in metal. The blades are perfect for fine cuts in a wide range of different metal materials and are also suitable for sawing in steel pipes and steel profiles.
Bayonet saw blade set for metal, Tough Box, 20 pieces, is the universal choice for efficient cutting in metal
The blades are perfect for fine cuts in a wide range of different metal materials
Suitable for cutting steel pipes and profiles

Krachtige dopbit, 1/4", met zes punten, 10 mm, lengte: 50 mm

Masonry size Ø 3,4,5,6,8 & Wood size Ø 3,4,5,6,8 & Metal size Ø 3,4,5,6,8 = Masonry sizes Ø 3-8mm; Wood sizes Ø 3-8mm; Metal sizes Ø 3-8mm