Bosch Gereedschap - pagina 21

The cup steel brush provides a good, rough surface finish. It is equipped with braided wire for demanding cleaning tasks on steel. This brush is suitable for removing heavy rust, undercoating, paint or varnish. The bristles are available in different thicknesses depending on how strong the abrasive effect needs to be. Thicker wires are more aggressive and provide a coarser but faster surface finish, while thinner wires provide finer, smoother surface results. It is intended for use with drills with a 6 mm shaft.
Cup Steel Brush - Twisted Wire
Suitable for demanding cleaning tasks on small to medium-sized metal surfaces such as rust removal or undercoating protection, removal of paint or varnish.

Designed for the wall chaser GDC 125 Professional. The parallel guide allows for milling parallel in adjacent grooves.
Parallel guide for circular saws

The SDS max tile chisel is ideal for clean and fast removal of wall and floor tiles. Its self-sharpening flat design and angled cutting edge provide excellent positioning for work in small joints and easy access to the area under the tiles, allowing them to be removed efficiently without breaking. The SDS max tile chisel is self-sharpening with a long lifespan and 30% higher material removal speed than standard chisels. It is compatible with SDS max shaft systems.Self-sharpening tile chisel with long lifespan and 30% higher material removal speed
SDS max tile chisel, ideal for removing wall and floor tiles

Snelspanboorhouder, 1,5-13 mm

It is compatible with power tools with an SDS max shaft system. The SDS max ground spike driver is ideal for driving spikes into the ground for lightning conductors and tent pegs. The product is designed for use in soil and foundation.
Ground spike driver
SDS max ground spike driver is intended for use in soil and other substrates

Nibbler die plate, for sheet metal, corrugated metal

It is compatible with an SDS plus chisel attachment, or it can be used directly in SDS plus rotary hammers with rotation stop. The SDS plus flat chisel can be used for standard chiseling for various demolition and renovation tasks. Good material removal is enabled by the flat cutting edge. The chisel is intended for use in concrete and brick for tasks such as adaptation work, destruction or removal of walls, renovation of joints, and clearing reinforcements.
Flat Chisel
SDS plus flat chisel for standard chiseling in connection with various demolition and renovation tasks

It is compatible with an SDS plus chisel attachment, or it can be used directly in SDS plus rotary hammers with rotation stop. The SDS plus pointed chisel can be used for standard chiseling for various remediation and renovation tasks. The chisel is equipped with a tapered edge and is intended for adaptation work, destruction or removal of walls, renovation of joints and clearing of reinforcements for use in concrete and bricks.
Pointed Chisel
SDS plus pointed chisel for standard chiseling in connection with various remediation and renovation tasks in concrete and bricks

The Wood Straight-bore head standard provides optimal cutting for common milling tasks. It has a high-quality tungsten carbide cutting edge that provides durable and reliable cutting results. Additionally, the bore head prevents kickback by limiting the thickness of the generated chips. It is intended for milling grooves, joints, notches and feather joints in soft and hard solid wood as well as composite wood. The bore head's long working length provides greater flexibility and deeper drilling in thick work materials. It is suitable for use with handheld, table-mounted portable milling machines and CNC machines.

It consists of two blades and four screws. The six-piece scissor blade set is a set with extra blades for Bosch slitting shears. Knife, chrome steel for cutting Inox

The Heavy Duty Metal Cup Brush provides an extra coarse surface finish. This cup brush is equipped with braided wire for demanding cleaning tasks. It is ideal for use on metal and suitable for cleaning medium to large steel surfaces, such as removing heavy rust, undercoating, paint or varnish. The bristles are available in different thicknesses depending on how strong the abrasive effect needs to be. Thicker wires are more aggressive and provide a coarser but faster surface finish, while thinner wires provide finer, smoother surface results. It is designed for use with angle grinders with M10 thread.
Steel Cup Brush - Twisted Wire
Suitable for demanding cleaning tasks on medium to large metal surfaces such as removing rust or undercoating, removing paint or varnish.
Fits angle grinders with M 10 or M 14 threads as well as GGS 6 S Professional

It is suitable for use with handheld, table-mounted portable milling machines and CNC. The Wood Straight-bore head standard ensures optimal cutting for common milling tasks. Durability and reliable cutting results are achieved thanks to high-quality tungsten carbide cutters. In addition, the bore head prevents kickback by limiting the thickness of the generated chips. It is intended for milling grooves, joints, notches and feather joints in soft and hard solid wood as well as composite wood

Routerbit

It is suitable for use with handheld, table-mounted portable milling machines and CNC. The Wood V-Groove Bit standard ensures optimal performance when cutting fine lettering. Durability and reliable cutting results are achieved thanks to its high-quality hard metal cutters. In addition, the hammer drill prevents kickback by limiting the thickness of the generated chips. It is intended for cutting thin decorative grooves and fine lettering as well as chamfering with side shielding in soft and hard solid wood and composite wood

Clean for Metal cup steel brush provides an extra fine surface finish. The cup steel brush is equipped with copper-coated, corrugated wire for light to moderately demanding cleaning tasks. It is suitable for removing coatings and rust and sanding paint on medium to large surfaces in metal and non-ferrous metals. This cup steel brush is also suitable for roughening, matting, and cleaning formwork boards and cladding. The copper-coated wires on the brush provide protection against corrosion. Brush wires are available in different thicknesses depending on how strong the abrasive effect needs to be. Thicker wires are more aggressive and provide a coarser but faster surface finish, while thinner wires provide finer, smoother surface results. It is intended for use with angle grinders with M14 thread.
Cup Steel Brush - Corrugated Wire, Brass Plated
Suitable For Light to moderately demanding cleaning tasks on medium to large surfaces of metal or base metals such as removal of coatings, removal of rusts, cleaning formwork boards & facades , roughening , matting , removing lacquer.
Fits Angle grinders with M 10 or M 14 thread as well as GGS 6 S Professional
Advantage: Corrosion protection thanks to brass-plated wire.

The Standard for Wood groove cutter ensures optimal cutting when milling rounded grooves in narrow edges. It has a high-quality hard metal blade that provides durable and reliable cutting results. In addition, the hammer drill prevents kickback by limiting the thickness of the generated chips. It is designed for work in soft and hard solid wood as well as composite wood. The Standard for Wood groove cutter is suitable for making placement joints in narrow edges, such as tongue and groove joints. The ball bearing makes it easy to control the tool directly on the workpiece without shielding. It is suitable for use with handheld routers and table-mounted portable routers.

Router bit

Standard for Wood Core Box ensures optimal cutting when milling curved edges. It has a high-quality carbide cutting edge that provides durable and reliable cutting results. In addition, the hammer drill prevents kickback by limiting the thickness of the generated chips. It is designed for milling curved edges on boards and structures in soft and hard solid wood as well as composite wood. The ball bearing makes it easy to control the tool directly on the workpiece without shielding. It is suitable for use with handheld routers and table-mounted portable routers

It is intended for use on planers. The polishing pad is intended for pre-polishing dirty or scratched lacquered surfaces using polish or abrasive paste

The Expert for Wood Straight Bit Solid Carbide is designed for long life and intense, daily use to achieve splinter-free cuts. The drill head is milled and ground internally based on hardened extra hard Microteq carbide for durability and high performance when used on wood. In addition, it has a protective coating that protects it from friction buildup, rust, and height that extends the drill head's outstanding cutting life. The drill head is made using computer-controlled balancing to give it high centricity with perfect rotational symmetry for precise, smooth cuts. It is intended for milling small and very precise grooves in soft and hard solid wood and composite wood as well as in special materials such as solid surfaces. They are particularly suitable for milling narrow grooves, e.g., for notching and jointing. Expert For Wood straight router bits have a special clearance angle that makes plunge cutting easy to perform. It is suitable for use with handheld, table-mounted portable routers machines or CNCs.

It is suitable for use with handheld milling machines and table-mounted portable milling machines. The Wood edge profiling drill standard ensures optimal cutting when milling edge profiles. It has a high-quality carbide cutting edge that provides durable and reliable cutting results. In addition, the hammer drill prevents kickback by limiting the thickness of the generated chips. It is intended for making decorative edges on shelves, frames, and frame profiles in soft and hard solid wood and composite wood

Routerbit

Routerbit

The Expert for Wood Straight Bit Solid Carbide is designed for long life and intense, daily use to achieve splinter-free cuts. The drill head is internally milled and ground based on hardened extra hard Microteq carbide for durability and high performance when used on wood. In addition, it has a protective coating that protects it from friction buildup, rust, and height that extends the drill head's outstanding cutting life. The drill head is made using computer-controlled balancing to give it high centricity with perfect rotational symmetry for precise, smooth cuts. It is intended for milling small and very precise grooves in soft and hard solid wood and composite wood as well as in special materials such as solid surfaces. They are particularly suitable for milling narrow grooves such as notching and jointing. Expert For Wood straight router bits have a special clearance angle that makes plunge cutting easy to perform. It is suitable for use with handheld, table-mounted portable routers, or CNC machines.