Bosch Gereedschap - pagina 22

The extraction bend is designed for Bosch vacuum cleaners. The extraction bend connects vacuum cleaner hoses and pipes. It is antistatic and has a diameter of 25 mm.
Suction tube

The vacuum cleaner hose is intended for Bosch vacuum cleaners.
Flexible tube

Polijstvilt voor excentrische schuurmachines met 125 mm diameter en middelgrove korrel voor gebruik op hout, akoestische panelen, ferrometalen, gewapend staal, kunststof en glasvezelversterkte kunststof (GFK).

Polijstvilt voor excentrische schuurmachines, 125 mm is gespecificeerd met een schijfmaat van 125 mm en middelgrove korrel, waardoor het geschikt is voor meerdere materiaaltypen bij werkplaats- en doe-het-zelfklussen.

Nieten type 53 bieden type 53 bevestiging met 11.4 mm breedte, 0.74 mm dikte en 12.0 mm lengte.

Nieten type 53 zijn geschikt voor werk met natuurlijke materialen en textiel/weefsel, tapijt, houten akoestische panelen, kunststof en kunstgrastapijt.

Houtdowel met 6 mm diameter en 30 mm lengte voor nauwkeurige verbindingswerkzaamheden, geleverd als verpakking van 50 stuks.

Houtdowel is vermeld met duidelijke specificaties voor diameter, lengte en inhoud, waardoor het eenvoudig is om te matchen met geschikte projecten en materiaaleisen.

Boorkopadapter, SDS-plus

Schijfborstel voor boormachines met nylon borstelharen met K80 korund schuurmiddel, 75 mm diameter en een maximale snelheid van 4500 rpm.

Schijfborstels voor boormachines – nylon borstelharen met korund schuurmiddel K80, 75 mm wordt geleverd met 1 mm borstelhaardikte, 6 mm schachtdiameter en 8 mm borstelbreedte voor boormachinegemonteerd borstelen en schurend reinigingswerk.

• Diameter: 75 mm
• Borstelhaardikte: 1 mm
• Max snelheid: 4500 rpm
• Schachtdiameter: 6 mm
• Borstelbreedte: 8 mm

The holder-mounted countersink drill, countersinks and edge mills efficiently in a single step in wood. The countersink is mounted on a dowel drilling head, solves all three tasks in an inexpensive and efficient way, and guarantees impressive results. The countersink is suitable for hard and soft wood, laminated and non-laminated chipboards and plywood. This multifunctional bit, made of tool steel, has a 90-degree chamfer angle, five cutting edges, and can also be used as a depth stop. Supplied with hex key; dowel drilling head not included. The countersink is intended for drill stands and screwdrivers.

Bosch stofzuigadapter voor GHO 12V-20

They are intended for the Bosch staple gun PTK 14. The staples, type 48, are for fastening thin materials. They are made of hard steel wire with a length of 14 mm

The narrowing nozzle for the hot air gun can be used with all Bosch hot air guns. The narrowing nozzle for the hot air gun has a diameter that is only half of other nozzles, making it ideal for use in corners. It is also perfect for concentrating the hot air flow on small surfaces for soldering and other purposes.Narrowing nozzle with halved diameter for working with or concentrating heat beam on small surfaces, e.g. when soldering

SystemBox; Medium-sized accessory box; Material: PP

Boorkopadapter, SDS-plus

Leuning

Connector voor geleiderails FSN 70, FSN 140.

They are designed for the Bosch air pressure staple gun GTK 40 Professional. The narrow-backed staples, 1.2/18 g, are plastic-coated and have chisel tips, making them suitable for fastening in many different types of interior work. They are suitable for installing thermal insulation, fiber gypsum boards, upholstery, stair treads and handrails. The staples can also be used to install fences and door-, window- and picture frames as well as securing wooden floors. The narrow back is especially suitable for decorative purposes because the staple back penetrates far into the wood and is almost invisible. They are also galvanized for rust protection. All staples are made in Europe which guarantees a consistently high quality.
galvanized version

The hand sanding block is intended for sanding large surfaces such as wood, metal and plasterboard. It has stable, strong sides for flat work and a clamping system for attaching all standard sandpaper sheets, rolls and mesh. Suitable for sanding large wood, metal and plasterboard surfaces. For sandpaper sheets and mesh

Starterkit met 3 onderdelen, hout, voor multifunctionele machines.

It is intended for use on planers. The polishing pad is intended for pre-polishing dirty or scratched lacquered surfaces using polish or abrasive paste

Doorslijpschijf voor tegel- en steenwerk, ontworpen voor marmer met een diameter van 23 cm, 2.2 cm boring, 2.4 mm snijbreedte en 5 mm segmenthoogte.

Bosch Diamond Cutting Disc Tiles is een metalen doorslijpschijf, geleverd als 1 stuk per verpakking en vermeld als compatibel met alle merken.

The narrow-backed staples fit staplers from the following brands: AEG, Bosch, Black+Decker, Bukama, Esco, kwb, Metabo, Novus and Wolfcraft. The narrow-backed staples type 55 are plastic-coated to achieve an adhesive effect that provides a strong and long-lasting hold in a range of different materials. This makes them ideal for both DIY tasks and professional purposes such as installing wall and ceiling cladding with joint and profile board brackets. The staples also have a narrow back that allows them to penetrate deeply into the material and provide a good hold with a very discreet staple back. They are particularly suitable for stapling thin materials where the staple back must not be pressed into the material

The reduction ring for circular saw blades has an adjustable holder hole, so the ring fits perfectly on all machines.
Reduction rings for circular saw blades
Stem blade thickness from 1.4 mm to max. 1.7 mm

Safety instruction: Only use Bosch hot air guns with electronic regulation. The welding shoe for the hot air gun is a nozzle with a side channel for supplying plastic welding wire with a diameter of up to 5 mm. It must be used in combination with a narrowing nozzle with a diameter of 9 mm.
Welding shoe
with side channel for supplying plastic welding wire up to Ø 5 mm. In connection with narrowing nozzle Ø 9 mm