Bosch Gereedschap - pagina 25

The extra handle provides better safety and comfort during work. It ensures a good grip on the machine and is intended for use on eccentric sanders.
Handle

A double-ended tip increases the value for the user because it can be combined with different or identical head types. It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The tapered torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks

The mixer tool has a shaft with an external hexagon and mixes materials from top to bottom without splashing. It has an external M14 thread and is suitable for emulsion, high-gloss paint, cement, joint compound, and cement-bound materials. The tool is intended for drill machines with manual mixing function such as GRW 9, GRW 11, GRW 12E and GRW 18-2E.
Stirring tool
SW 13 mm, drill chuck 16 mm

The dowel head is equipped with a centering point and support cutter, which ensures crack-free drilling of holes and uniform borehole walls. The wood dowel set provides a practical solution for mounting dowels in wood. The set comes with a dowel head, depth stop, dowel setters, profiled wooden dowels and wood glue. The set is ready to use and includes all the accessories you need for efficient work in soft and hard wood.
Wood Dowel Set with 32 pieces

The auxiliary handle makes it safe to work with a rotary hammer.
Handle for rotary hammers

The handle makes it safe to work with a hammer drill.
Handles for hammer drills

Afvalbak met filter (zwarte afwerking)

It fits vacuum cleaner hoses with a diameter of 49 mm, 35 mm and 19 mm. The two-part adapter is intended for Bosch vacuum cleaners.
Adapter, 2 parts.
Diameter: 49/35/19 mm

Designed for all Bosch hot air guns. The glass protection nozzle for the hot air gun has special side protectors that protect heat-sensitive materials such as glass.
Glass protection nozzle with special side protection. Protects heat-sensitive materials such as glass

The narrow-backed staples fit staplers from the following brands: AEG, Bosch, Black+Decker, Bukama, Esco, kwb, Metabo, Novus and Wolfcraft. The narrow-backed staples type 55 are plastic-coated to achieve an adhesive effect that provides a strong and long-lasting hold in a range of different materials. This makes them ideal for both DIY tasks and professional purposes such as installing wall and ceiling cladding with joint and profile board brackets. The staples also have a narrow back that allows them to penetrate deeply into the material and provide a good hold with a very discreet staple back. They are particularly suitable for stapling thin materials where the staple back must not be pressed into the material

They can be used for staplers from AEG, Bosch, Esco, Kwb, Lux, Mekano, Metabo, Novus, Peugeot, Rocafix , Rocagraf , Stanley , Swingline and Wolfcraft. The staples type 47 are for fastening thin and thick materials. They are made of hardened steel wire with a length between 16 and 30 mm. The width of the head is 1.8 or 2.8 mm depending on the device

Houten deuvels van Bosch met een diameter van 30 mm en een dikte van 10 mm voor eenvoudige montage- en uitlijningstaken.

Bosch Wood Dowels zijn gespecificeerd met een diameter van 30 mm en een dikte van 10 mm en bieden een eenvoudig, consistent deuvelformaat voor je werkplaats- en doe-het-zelfbehoeften.

The narrow-backed staples fit staplers from the following brands: AEG, Bosch, Black+Decker, Bukama, Esco, kwb, Lux, Metabo, Novus and Wolfcraft. The narrow-backed staples type 55 are ideal for general DIY tasks and professional stapling tasks. They provide extra strong joints and are ideal for a wide range of thin and also thicker materials. The staples have a narrow back so they can penetrate deeply into the material and provide a good grip with a very discreet staple back. They are particularly suitable for stapling thin materials where the staple back must not be pressed into the material

Komstaalborstel voor haakse slijpers en rechte slijpers met getwiste roestvrijstalen draad, 75 mm diameter, M14-schroefdraad en een maximale snelheid van 12,500 rpm.

Bosch Cup Steel Brush for angle and straight grinders – twisted wire, stainless, 75 mm heeft een draaddikte van 0.5 mm en is bedoeld voor gebruik op ferrometalen, inclusief wapeningsstaal.

Borstel voor boormachines met nylondraad en korundschuurmiddel K80, ontworpen voor werk op ferrometalen en wapeningsstaal.

Bosch Brush for drills – nylon wire with corundum abrasive K80, 25 mm heeft een borstelkop met 25 mm diameter, 1 mm draaddikte en een 6 mm schacht, met een maximale snelheid van 4500 rpm.

Dust extraction
Dust extraction for PMF 190 E, PMF 250 CES and GOP 300
for extracting sanding dust in combination with the sanding plate AVZ 93 G (not Starlock version).
Important! When working with the Starlock sanding plate AVZ 93 G, dust extraction with spare part number 2.609.256.D57 must be used.

Pre-filter, UniversalVac 18

It fits Bosch plate and universal axes. The movable blade is a spare blade designed for easy cutting of a wide range of materials.
Movable knife

Intended for planing. The stop allows for defining the rebate depth

Pijp voor externe afzuiging met Bosch universele stofzuiger PAS

Schuurband

Expert for Concrete diamond cup wheel with high speed provides the fastest work result in concrete. The aggressive double row of 9 segments minimizes the need for extra work. It is designed with large holes close to the edge of the head, which immediately removes dust, allowing for fast work during the grinding process. The grinding head's high balance level ensures grinding with vibration control. The product is developed for work in concrete as well as natural stone and artificial stone material. The high balance level means that work can be done with vibration control, which protects both users and power tools. The disc is intended for angle grinders

The extension has a 1/4 inch hexagonal shaft and is intended for use with screwdrivers. The hexagonal shaft extension for 1/4-inch Self-Cut Speed flat drills ensures greater range when drilling. The extension comes in two different lengths of 152 mm and 305 mm, and is suitable for all flat drill tasks where greater range is needed.
Extension 1/4" (6.35 mm) hexagonal shaft for Self Cut Speed flat drills

Do not use on shaft bushings. The collet clamps the milling cutter. Always use the correct size collet to avoid danger during use.
Collet