Bosch Gereedschap - pagina 20

Bosch HÆFTESØM TYPE 47 1.8X1.27X23MM 1000 STK

They can be used for staplers from AEG, Bosch, Esco, Kwb, Lux, Mekano, Metabo, Novus, Peugeot, Rocafix , Rocagraf , Stanley , Swingline and Wolfcraft. The staples type 47 are for fastening thin and thick materials. They are made of hardened steel wire with a length between 16 and 30 mm. The width of the head is 1.8 or 2.8 mm depending on the device

13,19 € (10,90 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch TRÆDYVELSÆTTER 6MM 4 STK

Deuvelzetterset voor Ø 6 mm, gemaakt door Bosch.

Bosch Dowel Setter Set for Ø 6 mm is ontworpen voor gebruik met deuvels met een diameter van 6 mm en wordt vermeld met een 6 mm diameterspecificatie.

3,51 € (2,90 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch BØRSTE SISAL RIFLET 85X20X10MM

Sisal koord borstel voor het voorpolijsten.

12,68 € (10,48 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch GUMMILÆBEINDSATS TIL VAC 3/15/20

Platte borstelinzet voor spuitmond
Klemmen met 2 schrapers

9,89 € (8,17 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch LIMPATRONER 7MM PLAST 10STK

Staafvormige kunststoffen, diameter 7 mm.

9,04 € (7,47 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch Reduction Ring for Circular Saw Blades

Deze cirkelzaag verloopring heeft een verstelbaar gat waardoor hij perfect op elke machine past.
Het gat werkt met of zonder verloopringen voor verschillende maten.
Kostenbesparing door het uitwisselen van gereedschap/zaagbladen voor verschillende gatmaten.
Geweldige flexibiliteit voor compatibiliteit met alle merken.
Leveringsomvang: 1 verloopring voor cirkelzaagblad: diameter 20 mm, gat 15,9 mm, dikte 1 mm

4,42 € (3,65 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch POWER-CHANGE ADAPTER FOR DRILL/DRIVERS

Power-Change Adapter is the fastest quick-change system on the market
Unique adapter for one-click locking and releasing of the hole saw and pilot holes
Easy to remove the cut material
Used for the Bosch Power Change keyless holder.

22,17 € (18,32 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch SPIDSMEJSEL SDS-P 140MM

It is compatible with an SDS plus chisel attachment, or it can be used directly in SDS plus rotary hammers with rotation stop. The SDS plus pointed chisel can be used for standard chiseling for various remediation and renovation tasks. The chisel is equipped with a tapered edge and is intended for adaptation work, destruction or removal of walls, renovation of joints and clearing of reinforcements for use in concrete and bricks.
Pointed Chisel
SDS plus pointed chisel for standard chiseling in connection with various remediation and renovation tasks in concrete and bricks

11,94 € (9,87 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch SPADEMEJSEL SDS-P 40X250MM STD

Beitel

18,03 € (14,90 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch KNIV TIL KROMSTÅL GSZ 160

It consists of two blades and four screws. The six-piece scissor blade set is a set with extra blades for Bosch slitting shears. Knife, chrome steel for cutting Inox

79,65 € (65,83 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch JORDSPYDNEDDRIVER SDS-MAX 16.5X260MM

It is compatible with power tools with an SDS max shaft system. The SDS max ground spike driver is ideal for driving spikes into the ground for lightning conductors and tent pegs. The product is developed for use in soil and foundation.
Ground Spike Driver
The SDS max ground spike driver is intended for use in soil and other substrates

68,43 € (56,55 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch MATRICE & STEMPEL TIL GNA 2.0

This universal matrix is designed for straight cuts and curved cuts in metal when used together with Bosch sheet punches. It is easy to use, even for narrow cuts in a variety of types of sheet metal. It also handles complicated cutouts without deforming the material.
Special matrix and punch suitable for corrugated sheets and almost all trapezoidal sheets up to 1.2 mm

135,74 € (112,18 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch MATRICE GNA 3.5

Nibbler die plate, for sheet metal, corrugated metal

125,74 € (103,92 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch FRÆSER HULKEL M/KLEJE HM 8MM L16MM R1

Standard for Wood Core Box ensures optimal cutting when milling curved edges. It has a high-quality carbide cutting edge that provides durable and reliable cutting results. In addition, the hammer drill prevents kickback by limiting the thickness of the generated chips. It is designed for milling curved edges on boards and structures in soft and hard solid wood as well as composite wood. The ball bearing makes it easy to control the tool directly on the workpiece without shielding. It is suitable for use with handheld routers and table-mounted portable routers

25,80 € (21,32 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch V-NOTFRÆSER 12.7MM SK8 L44.5MM HM

35,17 € (29,07 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch POLERFILT BLØD

It is intended for use on planers. The polishing pad is intended for pre-polishing dirty or scratched lacquered surfaces using polish or abrasive paste

6,72 € (5,55 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch FLADMEJSEL SDS-P 20X140MM

It is compatible with an SDS plus chisel attachment, or it can be used directly in SDS plus rotary hammers with rotation stop. The SDS plus flat chisel can be used for standard chiseling for various demolition and renovation tasks. Good material removal is enabled by the flat cutting edge. The chisel is intended for use in concrete and brick for tasks such as adaptation work, destruction or removal of walls, renovation of joints, and clearing reinforcements.
Flat Chisel
SDS plus flat chisel for standard chiseling in connection with various demolition and renovation tasks

11,94 € (9,87 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch PENSELBØRSTE BØLGET 15MM STÅL 6MM

The brush provides a good, fine surface finish. It is equipped with wavy wire for easy and moderately demanding cleaning tasks on small steel surfaces. Its shape makes it ideal for cleaning in very difficult to reach places such as corners and the inside of pipes and profiles. The brush is also suitable for removing rust, roughening, sanding and grinding paint. The bristles are available in different thicknesses depending on how strong the abrasive effect needs to be. Thicker wires are more aggressive and provide a coarser but faster surface finish, while thinner wires provide finer, smoother surface results. It is intended for use with drills with a 6 mm shaft.Brush - wavy wire
Optimally suited for processing very difficult to reach places.
Suitable for light cleaning tasks in corners as well as internal processing of pipes and profiles such as rust removal, roughening, matting or removing paint.

6,04 € (4,99 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch FRÆSER FLADSTAVHM 8MM L 32MM Ø21MM

It is suitable for use with handheld, table-mounted portable milling machines and CNC. The Standard for Wood Staff Bead boring head ensures optimal cutting when milling completely rounded edges. Durability and reliable cutting results are achieved thanks to its high-quality tungsten carbide cutters. In addition, the boring head prevents kickback by limiting the thickness of the generated chips. It is designed for work in soft and hard solid wood as well as composite wood. The Standard for Wood Staff Bead boring head is suitable for making completely rounded edges on stair treads, window sills, and shelves in one operation. Additionally, the Staff boring head is suitable for making rounded edges and beautiful moldings.

27,39 € (22,64 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch Noodfrees HM Ø12/AL:40MM 12MM SCHACHT

The Wood Straight-bore head standard provides optimal cutting for common milling tasks. It has a high-quality tungsten carbide cutting edge that provides durable and reliable cutting results. Additionally, the bore head prevents kickback by limiting the thickness of the generated chips. It is intended for milling grooves, joints, notches and feather joints in soft and hard solid wood as well as composite wood. The bore head's long working length provides greater flexibility and deeper drilling in thick work materials. It is suitable for use with handheld, table-mounted portable milling machines and CNC machines.

25,80 € (21,32 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch LAMELSLIBESKIVE BM 125X22MM K80 FLAD

Lamellenschijf

3,80 € (3,14 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch KOPSTÅLBØRSTE Ø75MM MESSING

Clean for Metal cup steel brush provides an extra fine surface finish. The cup steel brush is equipped with copper-coated, corrugated wire for light to moderately demanding cleaning tasks. It is suitable for removing coatings and rust and sanding paint on medium to large surfaces in metal and non-ferrous metals. This cup steel brush is also suitable for roughening, matting, and cleaning formwork boards and cladding. The copper-coated wires on the brush provide protection against corrosion. Brush wires are available in different thicknesses depending on how strong the abrasive effect needs to be. Thicker wires are more aggressive and provide a coarser but faster surface finish, while thinner wires provide finer, smoother surface results. It is intended for use with angle grinders with M14 thread.
Cup Steel Brush - Corrugated Wire, Brass Plated
Suitable For Light to moderately demanding cleaning tasks on medium to large surfaces of metal or base metals such as removal of coatings, removal of rusts, cleaning formwork boards & facades , roughening , matting , removing lacquer.
Fits Angle grinders with M 10 or M 14 thread as well as GGS 6 S Professional
Advantage: Corrosion protection thanks to brass-plated wire.

17,52 € (14,48 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch Schuurband 13x451mm K120 3 stuks

Schuurband

7,01 € (5,79 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch BITS DOBBEL LIGE/PH/PZ L:60MM 3 STK

6,88 € (5,69 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch BETONPLUG 16MM 50 STK TIL GCR 350/180

124,05 € (102,52 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Maandag - Donderdag:	09:00 - 12:00
Vrijdag:	Gesloten
Weekend en Deense feestdagen:	Gesloten

Telefoon:	085 301 55 55
Email particulier:	[email protected]
Email zakelijk:	[email protected]