Bosch - pagina 55 - Kwaliteit tegen concurrerende prijzen

Bosch HAMMERBOR SDS-P P3 4X100/160MM

The SDS plus-3 drill bit has long durability when drilling in reinforced concrete. The Dura design with four grooves ensures increased durability with effective dust removal and reduced heat development. The drill bit is made of high-alloy steel with optimized hardening technology, which increases wear resistance. The serrated cutting edges are made of an extra robust carbide material developed and produced by Bosch. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, precise drilling, and efficient fastening. The drill bit is intended for drilling in concrete and masonry together with SDS plus holders for rotary hammers.
Package contains 1 piece.

5,89 € (4,87 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch BIT T25 L:25 mm 3 STK

Schroevendraaier bit, 3 stuks, 1/4", torx, T25, lengte: 25 mm

4,36 € (3,60 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch METALBOR POINTTEC HSS-R 12.3MM 5 STK: 0 (This is already in Dutch)

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures fast chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 5 pieces.

24,22 € (20,02 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch EXPERT SHEET METAL HOLE SAWS FOR ROTARY DRILLS/DRIVERS & IMPACT DRILL/DRIVERS 30MM

Long Life Cutting Holes in Stainless Steel
Exceptional durability is built in with Bosch Carbide Technology.
Individually ground teeth made from fine, hard Carbide.
With integrated thread.

49,11 € (40,59 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch EXPERT SHEET METAL HOLE SAWS DRILLS/DRIVERS & IMPACT DRILLS/DRIVERS

Long life when hole cutting stainless steelExceptional durability is a given with Bosch Carbide Technology.Individually ground teeth made of fine carbide.With integrated thread.

64,96 € (53,69 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch CYL-9

The CYL-9 Ceramic tile drill head is a standard drill head for drilling in tiles. The practical drill head is suitable for dry drilling without cooling. The simple design without notches is particularly suitable for drilling in soft to medium-hard tiles. Drilling without impact function at low speeds. The drill head is compatible with power and battery-powered drills with a cylindrical shaft system.
Tile drill set CYL-9 Ceramic with 5 pieces

31,80 € (26,28 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch NØGLE T.16MM/T.LÅSSIKR.

The reserve key fits toothed chuck drill chucks. It is important to choose the correct key type (A/B/C/D/F/G)

10,01 € (8,27 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch FRÆSER NOT 2 SKÆR HM 8 mm L 20 mm B 11

Routerbit, Recht, 11 mm, lengte: 51 mm

13,89 € (11,48 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch SLIBEBL EXC 150MM NET K100 5STK

Schuurpapier, voor hout, zachthout, hardhout, verf, gips, lak, 5 stuks, 150 mm rond korrel: P100

10,44 € (8,63 €)

Extern magazijn, 5 - 6 werkdagen levertijd

Bosch SPIRALBOR 6X50X90MM TRÆBOR

Boor, voor zacht hout, hardhout, centreerpuntboor, 6 mm, cilindrisch, lengte: 93 mm

3,40 € (2,81 €)

Extern magazijn, 5 - 6 werkdagen levertijd

Bosch SCREWDRIVER TX 40X125 PROFESSIONAL

Schroevendraaier, 125 mm, TX40

12,97 € (10,72 €)

Extern magazijn, 5 - 6 werkdagen levertijd

Bosch BITSSÆT IMPACT PH/PZ/TX 50MM QUHOLD 8ST

The set of Pick and Click screwdriver bits with Impact Control in 36 pieces also includes socket wrenches as well as Impact Control Universal Holder Standard Magnetic and Impact Control Universal Holder Quick Release. These holders provide an extra good grip on the bit when mounting screws with power tools, while the Quick Release function allows for quick and easy changes. The screwdriver bit is part of the Bosch Pick and Click system, which enables customized accessory sets. The click-fitting system makes it easy to change bits and drills, thus obtaining an individually tailored set. The bit comes in a plastic holder that can easily be clicked into empty Pick and Click boxes (size M and L) for customized bit sets.
Package of 7 pieces (index)

17,69 € (14,62 €)

Extern magazijn, 5 - 6 werkdagen levertijd

Bosch METALBOR HSS-G 7.1X101MM 10 STK

25,92 € (21,42 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch E-Cloths Keukenpakket

Cleaning and polishing cloths set, microvezel

18,50 € (15,29 €)

Extern magazijn, 4 - 5 werkdagen levertijd

Bosch Robuuste lijn SDS-plus-5

Compatible with SDS plus holder rotary hammers. The SDS plus-5 drill head guarantees problem-free drilling. The grooved carbide tip with notches ensures smooth drilling and easily penetrates the material without getting stuck, even in concrete. The Activeteq centering tip guides the drill position from the start without shaking or displacement and ensures precise hole diameter. AWB soldering and hardening technology reduces vibration during drilling work, so the user is not burdened. The drill bit is suitable for masonry and concrete. The visible wear indicator shows if the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by PGM Masonry Drill Bit Association Board and guarantees tight tolerances, accurate drilling, and efficient fastening. The drill head is made in Germany.
Robust Line hammer set SDS plus-5 with 5 pieces

22,51 € (18,60 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch FORSÆNKER 5X16MM

The holder-mounted countersink drill, countersinks and edge mills efficiently in a single step in wood. The countersink is mounted on a dowel drilling head, solves all three tasks in an inexpensive and efficient way, and guarantees impressive results. The countersink is suitable for hard and soft wood, laminated and non-laminated chipboards and plywood. This multifunctional bit, made of tool steel, has a 90-degree chamfer angle, five cutting edges, and can also be used as a depth stop. Supplied with hex key; dowel drilling head not included. The countersink is intended for drill stands and screwdrivers.

14,14 € (11,69 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch EXPERT 'AERATED CONCRETE' S1141HM BAYONET SAW BLADES

Zaagblad, voor cellenbeton, lengte: 225 mm, breedte: 19 mm

22,49 € (18,59 €)

Extern magazijn, 5 - 6 werkdagen levertijd

Bosch STIKSAVKL T 130 RIF 3 STK

Jigzaagblad, voor tegels, keramiek, gietijzer, 3 stuks, korrel: 30

16,77 € (13,86 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch AV / multimedia paneel SDS-MAX - SDS-PLUS

The drill holder for drill hammers can be converted from an SDS max shaft to an SDS plus hammer drill bit

78,55 € (64,92 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch BITSSÆT SX4 T8 - 40 XH 49MM 8 STK

This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hardness and enables sufficient performance for all tasks. The tapered torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks. This robust and compact set has a transparent storage box that provides a good overview of the contents as well as secure storage and transport. It has an external hexagonal shaft of 1/4 inch and is designed for universal mounting of screws with screwdrivers and power drills.
Robust Line bit set Sx extra hard with 8 pieces
Bit length 49 mm, ISO 1173 E6.3, without universal holder

21,76 € (17,98 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch AdvancedTemp

For energy saving and better living quality

92,88 € (76,76 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch Bosc 11-delige Plus-3 boor- en beitelset | 26085799

Boor- en beitelset, voor beton, metselwerk, hamerboor, 11-delig, 5 mm, 6 mm, 8 mm, 10 mm, 12 mm, SDS-plus, lengte: 160 mm, 110 mm, 250 mm

54,93 € (45,40 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch Bosc Schlaghammer GSH 16-30 bu | 0611335

Breekhamer, 1750 W, zeskantbout 30 mm, 41 Joules

1.381,14 € (1.141,44 €)

Extern magazijn, 5 - 6 werkdagen levertijd

Bosch SPIDSMEJSEL 400MM SDS-M RTEC SPEED 10STK

Beitel

143,23 € (118,37 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch KNIVE TIL GSZ160

It consists of two blades and four screws. The scissor blade set with 6 pieces is a set with extra blades for Bosch slitting shears.
Molding list set
consisting of 2 molding lists and 4 screws

93,50 € (77,27 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Maandag - Donderdag:	09:00 - 12:00
Vrijdag:	09:00 - 12:00
Weekend en Deense feestdagen:	Gesloten

Telefoon:	085 301 55 55
Email particulier:	[email protected]
Email zakelijk:	[email protected]