Cirkelzaagblad levert 210 mm blad-diameter, 30 mm asgat (met reduceerring), 2.5 mm zaagsnede en 48 tanden voor het zagen van hout en akoestische panelen.

Precision cirkelzaagblad is gespecificeerd met een ontwerp met 48 tanden en 2.5 mm snijbreedte, ontworpen om te passen op zagen met een 30 mm asgat en om schone, gecontroleerde zaagsneden in hout en akoestische paneelmaterialen te ondersteunen.

Cirkelzaagblad STANDARD met 180 mm bladdiameter, 30/20 mm asgat met reductiering, 2.2 mm zaagsnede en 24 tanden voor het zagen van hout en akoestische panelen.

STANDARD cirkelzaagblad is gespecificeerd met een diameter van 180 mm en een ontwerp met 24 tanden, met een 30/20 mm asgatoptie en 2.2 mm snijbreedte om te passen bij compatibele zaagopstellingen bij het werken met hout of akoestische platen.

• Bladdiameter: 180 mm
• Asgat: 30/20 mm (met reductiering)
• Zaagsnede / snijbreedte: 2.2 mm
• Tanden: 24
• Materialen: hout, akoestische panelen

Cirkelzaagblad, voor hout, 250 mm, 60 tanden

The Bosch HSS-R metal drill bit, with an 11 mm diameter and 142 mm length, combines excellent performance with versatility. Ideal for occasional use, it's suitable for a variety of projects, both in home workshops and professional environments.

Boorset voor metaal, 10 stuks

Boorstift, voor beton, metselwerk, versterkt beton, 24 mm, SDS-max, lengte: 520 mm

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering point of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral drill bit is manufactured according to DIN 338. The type N (notch angle) of the borehead has a 135-degree point and a diameter tolerance of h8. It has a cylindrical shaft system (the shaft has the same diameter as the borehead) and is intended for use in drilling stands and screwdrivers.
Package with two pieces.

230X280MM

Zaagbladenset, voor hout, 3 stuks

Schroevendraaier bit, 3 stuks, 1/4", torx, T25, lengte: 25 mm

Schroefbitset voor interne Torx (T) schroeven, met 5 standaard bits in de maten T10, T15, T20, T25 en T30 met 25 mm lengte en 1/4" externe zeskantschacht (ISO 1173 C6.3).

Bosch 5-delige schroevendraaierbitset standaard voor interne Torx schroeven (T) biedt een compacte selectie van veelvoorkomende Torx-maten voor compatibele 1/4" zeskant bithouders, waardoor je eenvoudig de juiste bit bij de schroefkop vindt.

• Inbegrepen bits: T10, T15, T20, T25, T30
• Lengte: 25 mm
• Schachttype: 1/4" externe zeskant, ISO 1173 C6.3

Drill bit, for concrete, masonry, hammer bit, 24 mm, SDS-plus, length: 250 mm

Boorstift, voor beton, versterkt beton, graniet, gehard beton, gneis, hamerboor, 8 mm, SDS-plus, lengte: 215 mm (pak van 10)

Boorset, voor beton, metselwerk, kalksteen, steen, kunststeen, 7 stuks: 5 mm, 6 mm, 7 mm, 8 mm ,10mm en 4mm. Lengte:75mm ,85mm ,100mm en120mm

Flap schijf, voor metaal, breedte: 125 mm, korrel: 60

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering point of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral drill bit is manufactured according to DIN 338. The type N (notch angle) of the borehead has a 135-degree point and a diameter tolerance of h8. It has a cylindrical shaft system (the shaft has the same diameter as the borehead) and is intended for use in drilling stands and screwdrivers.
Package with one piece.

BIM invalzaagblad AIZ 10 AB Hout en Metaal

To Bosch, Hitachi, Makita, Ryobi,...

This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hardness and enables sufficient performance for all tasks. The tapered torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks. This robust and compact set has a transparent storage box that provides a good overview of the contents as well as secure storage and transport. It has an external hexagonal shaft of 1/4 inch and is designed for universal mounting of screws with screwdrivers and power drills.
Robust Line bit set S extra hard with 8+1 pieces
Bit length 25 mm, ISO 1173 C6.3, with quick-change universal holder

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill head is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill head's efficient U-shape with 2 notches ensures effective dust removal, less friction, reduced heat generation and wear, extending the life of the bit. The drill bit provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling and efficient fastening. The drill head is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package contains 1 piece.

Boorkopadapter, SDS-plus

Routerbit, voor zachthout, hardhout, afschuining, 23.7 mm, lengte: 54 mm, breedte: 5.5 mm

Bosch 2608661688 Plunge Cut GOP Zaagblad AIZ 32 AB BIM zaagblad voor hout en metaal, breedte 32mm x lengte 50mm x pitch van 1.3mm. Deze langdurige bladen zijn geweldig voor het maken van plongeersneden in zachthout en het snijden van ventilatieroosters of uitsparingen in meubelcomponenten, deuvels, pen-en-gatverbindingen etc