Bosch - pagina 54 - Kwaliteit tegen concurrerende prijzen

Bosch STIKSAVKLINGE T 227 D 5 STK METAL/KUNST

Zaagblad, voor aluminium, buizen, glasvezel, plaatmetaal, profielen, 5 stuks, lengte: 100 mm

12,80 € (10,58 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch STIKSAVKL. T101 BRF 3 STK

For use with jigsaws featuring fastening systems with T-shanks. The T 101 BRF Clean for Hard Wood jigsaw blade provides clean, straight cuts in wood. Its precision-ground teeth with ground-tooth construction make clean cuts. The blade is made of bimetal (BIM), and its fully hardened HSS tooth list is attached to a high-elastic HCS (carbon steel) construction, making the blade suitable for cutting hard materials such as hardwood and abrasive woodworking materials. In addition, it features reve...

10,77 € (8,90 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch STIKSAVKL T 101 BF BIM 5 STK

Decoupeerzaagblad, voor laminaat, hardhout, gelamineerde panelen, epoxy, glasvezelversterkt plastic, 5 stuks, T-schacht, lengte: 100 mm

14,74 € (12,18 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch METALBOR HSS-G Ø11X94X142MM 118GR

Bosch 2 609 255 057 drill bit

6,11 € (5,05 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch BOREPATROON Ø1.5-13MM 1/2-20UNF

Snelspanboorkop met een 1.5–13.0 mm spanbereik, 1/2"–20 gereedschapshouder en ondersteuning voor rechts-/linksom draaien voor gebruik met stationaire boormachines, boormachines, klopboormachines en accuboormachines.

Bosch Boorkop tot 13 mm biedt een veelzijdige passing voor meerdere boortypes, met een stevige grip binnen het opgegeven spanbereik en ondersteuning voor zowel rechts- als linksom draaien.

19,70 € (16,28 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch BITS T20 25MM 1/4 Standaard 2STK

Bosch 2609255934 screwdriver bit 1 pc(s)

4,49 € (3,71 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch METALBOR HSS-CO s 11.5X142MM 5STK

The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly, so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers.
Package of 5 pieces.

55,31 € (45,71 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch HAMMERBOR SDS-P S3 12X200/260MM 10STK

The SDS plus-3 drill bit has long durability when drilling in reinforced concrete. The Dura design with four grooves ensures increased durability with effective dust removal and reduced heat development. The drill bit is made of high-alloy steel with optimized hardening technology, which increases wear resistance. The serrated cutting edges are made of an extra robust carbide material developed and produced by Bosch. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, precise drilling, and efficient fastening. The drill bit is intended for drilling in concrete and masonry together with SDS plus holders.
Package of 10 pieces.

54,66 € (45,17 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch BETONBOR CYL5 6X100MM

Boor, voor beton, metselwerk, steen, 6 mm, cilindrisch, lengte: 100 mm

4,76 € (3,93 €)

Extern magazijn, 5 - 6 werkdagen levertijd

Bosch METALBOR HSS-G s 3x61MM 2STK

Boor, spiraalboor, 3 mm, cilindrisch, lengte: 61 mm (pak van 2)

4,90 € (4,05 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch DIAMANTBOR TØR 42X150MM 1/2 BEST

86,45 € (71,45 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch Expert SelfCut Speed

Boorstift, voor spaanplaat, zachthout, spaanplaat, speedboor, 8 mm, zeskant, lengte: 152 mm

4,55 € (3,76 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch METALBOR HSS-CO s 3.2X65MM

The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly, so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers.
Package with one piece.

3,74 € (3,09 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch STIKSAVKL T 101 D TRÆ 5 STK

Decoupeerzaagblad, voor spaanplaat, multiplex, vezelplaat, zachthout, 5 stuks, T-schacht, lengte: 100 mm

9,60 € (7,93 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch Diamantbor Tør 107x150mm 1/2 Prof

77,84 € (64,33 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch DIAMANTBOR TØR 52X150MM 1/2PROF

56,30 € (46,53 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch SPIRALBOR 16X100X160MM SEKSKANTSKAFT

The drill bit has a hexagonal shank system and is compatible with all screwdrivers with a 13 mm chuck. The spiral drill bit is suitable for quick and precise drilling when drilling through holes, pre-drilling for rafter nails, and drilling deep dowel holes in wood. The powerful self-feeding tip pulls the drill bit all the way through, ensuring fast and precise drilling with low power consumption. The optimized low-friction geometry of the drill bit with solid core ensures straight holes, high chip removal, and higher working speed. The optimized guide edge of the drill bit and precision-ground main cutting edge produce precise holes. Suitable for use in construction trades, by carpenters and roofers, it is suitable for both softwood and hardwood
Total length 160 mm

12,41 € (10,26 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch Dieptebegrenzer met bit PH2 1/4

Diepte-aanslag met Phillips (PH2) schroevendraaierbit, ontworpen om de schroefdiepte te controleren met een lengte van 60 mm.

Bosch Diepte-aanslag met schroefbit PH combineert een diepte-aanslag en PH-schroefkopbit maat 2 voor consistent schroeven wanneer herhaalbare diepte belangrijk is.

23,92 € (19,77 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch SPÆNDETANG 8MM GOF 1200A/1300ACE

Do not use on shaft bushings. The collet clamps the milling cutter. Always use the correct size collet to avoid danger during use.
Collet

37,95 € (31,36 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch METALBOR POINTTEC HSS-R 12.7MM 5STK

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 5 pieces.

26,46 € (21,87 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch SLIBERULLE FLEKSIBEL 15MM K120

System accessories PRR 250 ES; Grinding roller (flexible)

9,53 € (7,88 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch STIKSAVKLINGE U 101 D 3 STK TRÆ

They are suitable for jigsaws with U-shafts (universal shafts) of all brands of power tools. The U 101 D Clean for Wood jigsaw blade provides clean, straight cuts in wood. Its precision ground teeth with toothed construction provide clean results. The blade is made of carbon-rich steel and suitable for cutting softwood and non-abrasive woodworking materials. It is equipped with a large progressive tooth height (4-5.2 mm) for cutting wood materials with a thickness of 10-45 mm.U 101 D
HCS, ground and toothed
BIM, laid out, ground softwood (10-45 mm), chipboard, furniture board, fiberboard

6,95 € (5,74 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Decoupeerzaag - Bosch STIKSAVKLINGER T 227 D 100 STK - 2608638382

The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly, so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers.
Package of 5 pieces.

32,98 € (27,26 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch - pagina 54

Bosch STIKSAVKLINGE T 227 D 5 STK METAL/KUNST

Bosch STIKSAVKL. T101 BRF 3 STK

Bosch STIKSAVKL T 101 BF BIM 5 STK

Bosch METALBOR HSS-G Ø11X94X142MM 118GR

Bosch BOREPATROON Ø1.5-13MM 1/2-20UNF

Bosch BITS T20 25MM 1/4 Standaard 2STK

Bosch METALBOR HSS-CO s 11.5X142MM 5STK

Bosch HAMMERBOR SDS-P S3 12X200/260MM 10STK

Bosch BETONBOR CYL5 6X100MM

Bosch METALBOR HSS-G s 3x61MM 2STK

Bosch DIAMANTBOR TØR 42X150MM 1/2 BEST

Bosch Expert SelfCut Speed

Bosch METALBOR HSS-CO s 3.2X65MM

Bosch STIKSAVKL T 101 D TRÆ 5 STK

Bosch Diamantbor Tør 107x150mm 1/2 Prof

Bosch DIAMANTBOR TØR 52X150MM 1/2PROF

Bosch SPIRALBOR 16X100X160MM SEKSKANTSKAFT

Bosch Dieptebegrenzer met bit PH2 1/4

Bosch SPÆNDETANG 8MM GOF 1200A/1300ACE

Bosch METALBOR POINTTEC HSS-R 12.7MM 5STK

Bosch SLIBERULLE FLEKSIBEL 15MM K120

Bosch STIKSAVKLINGE U 101 D 3 STK TRÆ

Bosch STIKSAVKLINGER T 227 D 100 STK

Bosch FLADMEJSEL SDS-MAX 600MM

Bosch METALBOR HSS-CO s 9.5X125MM 5STK

Maandag - Donderdag:	09:00 - 12:00
Vrijdag:	09:00 - 12:00
Weekend en Deense feestdagen:	Gesloten

Telefoon:	085 301 55 55
Email particulier:	[email protected]
Email zakelijk:	[email protected]