Flap schijf, voor metaal, 125 mm, korrel: 40

It can be used for glue guns of all brands including Bosch, Black+Decker, Bostik, Bühnen, Metabo, Pattex, Peugeot, Steinel and Uhu. The glue stick is made of hot melt adhesive and is easy to work with for repairs, fastening, mounting, sealing and caulking. With its transparent color and elastic but strong holding power the glue stick is suitable for bonding seals, PVCs , plastics , leather , ceramics , textiles and glass.

Schroevendraaier bit, torx, T20, hex, lengte: 89 mm

It is suitable for use on wood, plastic, and non-ferrous metals and has a cylindrical shaft system. The HSS countersink drill head with a cylindrical shaft provides smooth countersinking for screws and deburring of holes in soft materials. The ground countersink drill head is made of HSS (high-speed steel), which provides optimal surface quality for even work on smooth surfaces. Outstanding results in soft materials thanks to the 90-degree cutting edges that continuously function free of splinters and without leaving burrs.
Cone countersink set with 3 parts
1 cutter at 90°, Ø 8-10-12 mm
Suitable for wood, plastic, alloys

Boor, spiraalboor, 10 stuks, 4.5 mm, cilindrisch, lengte: 80 mm

Metaalboor levert HSS-R-prestaties volgens DIN 338 voor gebruik in een boormachine, met een 18.0 mm boor диаметer en 191 mm totale lengte.

Bosch Metaalboor HSS-R, DIN 338 is ontworpen voor boren in metaal, kunststof en roestvrij staal en heeft een 12 mm schachtdiameter met een 130 mm werklengte voor stabiel, gecontroleerd boren.

The SDS max-9 Stone drill bit has a long lifespan in natural stone. The drill bit has two main cutting edges and two robust side bolts, which extend the lifespan. The drill bit is made of a high-quality carbide material that ensures long life and great durability. The vibration-optimized design with 2+2 grooves also ensures optimal power transmission during drilling. The drill bit is intended for drilling in stone. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, accurate drilling, and efficient fastening. It is compatible with all hammer drills with SDS max holders.
Package of 1 piece.

Hamerboor (SDS plus) met een diameter van 5.5 mm en een werklengte van 50 mm, ontworpen voor boren in steen, metselwerk, graniet, beton en gewapend beton.

Bosch Hammer Drill Bit SDS plus levert een stevige SDS plus-passing en een totale lengte van 110 mm, waardoor hij zeer geschikt is voor nauwkeurige boortaken in taaie minerale materialen.

Diepte-aanslag met Phillips (PH2) schroevendraaierbit, ontworpen om de schroefdiepte te controleren met een lengte van 60 mm.

Bosch Diepte-aanslag met schroefbit PH combineert een diepte-aanslag en PH-schroefkopbit maat 2 voor consistent schroeven wanneer herhaalbare diepte belangrijk is.

Verzinkset met één snijkant in een 3-delige kit met diameters 8.0, 10.0 en 12.0 mm, 50 mm totale lengte en een cilindrische schacht.

Bosch C countersink set, 1-flute, 3 pieces is ontworpen voor gebruik op non-ferrometalen, onedele metalen, kunststof en piepschuim, zachthout en hardhout/massief hout, en ferrometalen inclusief plaatmetaal.

Bitset met drie dubbelzijdige Phillips-bits (PH1-PH1, PH2-PH2, PH3-PH3) met een lengte van 60 mm en een 1/4" externe zeskantschacht.

Bosch 3-delige dubbelzijdige bladset (PH, PH) is ontworpen voor Phillips-schroefkoppen en biedt drie gangbare PH-maten in één compacte set, compatibel met gereedschap met een 1/4" externe zeskant bithouder.

The reserve key fits toothed chuck drill chucks. It is important to choose the correct key type (A/B/C/D/F/G)

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures fast chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 10 pieces.

Polijstvilt voor excentrische schuurmachines met 125 mm diameter en middelgrove korrel voor gebruik op hout, akoestische panelen, ferrometalen, gewapend staal, kunststof en glasvezelversterkte kunststof (GFK).

Polijstvilt voor excentrische schuurmachines, 125 mm is gespecificeerd met een schijfmaat van 125 mm en middelgrove korrel, waardoor het geschikt is voor meerdere materiaaltypen bij werkplaats- en doe-het-zelfklussen.

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures fast chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 10 pieces.

Schuurschijvenset voor haakse slijper met 10 schijven, 115 mm diameter en gemengde korrelselectie (4 x 60, 4 x 120, 2 x 180) voor uiteenlopende schuurwerkzaamheden.

Schuurschijvenset met 10 stuks voor haakse slijper is ontworpen voor werkzaamheden aan coatings, verf, plamuren, hout en composietmaterialen, waaronder zachthout, hardhout/massief hout, spaanplaat, akoestische panelen, krasvaste lak en ferrometalen zoals wapeningstaal.

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering point of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral drill bit is manufactured according to DIN 338. The type N (notch angle) of the borehead has a 135-degree point and a diameter tolerance of h8. It has a cylindrical shaft system (the shaft has the same diameter as the borehead) and is intended for use in drilling stands and screwdrivers.
Package with one piece.

The C410 Standard for Wood and Paint is characterized by a high material removal rate when hand sanding wood and paint. This universal hand sanding product ensures smooth and consistent material removal thanks to its robust abrasive surface coated with semi-open aluminum oxide grains. In addition, the electrostatically open surface allows for good dust extraction, preventing clogging and ensuring effective sanding and clean surface results. Intended for all types of hand sanding on wood, wood-based materials, veneer as well as solid surfaces, it is suitable for intermediate sanding of lacquer on surfaces and rounded edges. Also ideal for roughening and grinding down paint, varnish, putty as well as roughening and fine grinding feather edges, primer coats or putty. The sheet is covered with strong semi-open aluminum oxide abrasive grains that ensure uniform surface quality. The electrostatically open coating ensures consistent material removal. Additionally the abrasive grain is attached using a fully synthetic resin bond on C-weight backing material which provides good flexibility and optimal grinding properties.The C410 Standard for Wood & Paint Sandpaper Roll can be torn into appropriate pieces making it suitable to use with hand-sanding blocks.
5 m

X440 Best for Wood and Paint removes material with impressive speed when sanding old paint, varnish or wood surfaces. The strong abrasive grain of semi-loose aluminum oxide guarantees effective sanding. In addition, the backing material is made of robust X-cloth with a quality tape joint that ensures high strength during demanding work. Furthermore, the grains are provided with an electrostatic open surface that ensures uniform dust removal and uninterrupted sanding. This product is intended for sanding wood and painted surfaces and is suitable for smoothing out edges. The product is also ideal for planar grinding of grooves and edges. The abrasive grain is attached using a fully synthetic resin bond, which ensures exceptional durability in tough tasks. The X440 Best for Wood and Paint abrasive belt fits belt sanders.
Package of 3 pieces.

Steunschijf, 115 mm

The hand sanding block is ideal as a grinding support for all types of hand sanding work. It has different hardness on each side, a hard and a soft side, for grinding different surfaces with the same block. It is equipped with a Velcro closure system and is intended for use with all standard sanding blades and pieces of abrasive rolls.
Cork sanding block, small

The vacuum cleaner hose is intended for Bosch vacuum cleaners.
Flexible tube

Decoupeerzaagblad voor fijn zagen met 1.4 mm tandsteek (19 TPI) en een totale lengte van 70 mm.

Bosch jigsaw blade HCS, U 1 AO is ontworpen voor het zagen van hout en akoestische panelen, met een getande lengte van 52 mm voor gecontroleerde, nauwkeurige zaagsneden.

Bosch 2 609 256 912 drill bit 1 pc(s)