The handle makes it safe to work with a hammer drill.
Handles for hammer drills

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The tapered torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks.
Drive unit ISO 1173 C6.3, 1/4" external hexagon
with reduced diameter at the bit output, suitable for countersinking screws

Drill bit, for concrete, masonry, hammer bit, 10 mm, SDS-plus, length: 1005 mm

Diepteaanslag

Routerbit, Recht, 4 mm, lengte: 51 mm

It is suitable for use with handheld, table-mounted portable milling machines and CNC. The Wood Straight-bore head standard ensures optimal cutting for common milling tasks. Durability and reliable cutting results are achieved thanks to high-quality tungsten carbide cutters. In addition, the bore head prevents kickback by limiting the thickness of the generated chips. It is intended for milling grooves, joints, notches and feather joints in soft and hard solid wood as well as composite wood

Sjabloon gids, 30 mm

Routerbit, Recht, 11 mm, lengte: 51 mm

Sjabloon gids, 13 mm

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures fast chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 5 pieces.

Boor, voor zacht hout, hardhout, spiraalboor, 18 mm, cilindrisch, lengte: 180 mm

The SDS plus-5 drill head guarantees trouble-free drilling. The grooved carbide tip with notches ensures smooth drilling and easily penetrates the material without getting stuck, even in concrete. The Activeteq centering tip guides the drill position from the start without shaking or displacement and ensures precise hole diameter. AWB soldering and hardening technology reduces vibration during drilling, so the user is not burdened. The drill is suitable for masonry and concrete. The visible wear indicator shows if the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill head is made in Germany. Compatible with SDS plus holder rotary hammers.
Package of 1 piece.

The step drill bit is made of HSS (high-speed steel) and provides a long lifespan when used with coolant. Laser-marked numbers on both flutes provide highly visible and durable marking of the hole diameter. Additionally, the 3-flat shank prevents slipping in the drill chuck and provides efficient transmission with high torque. The HSS step drill head delivers smooth, burr-free drilling in multiple diameters with a single bit. It is ideal for deburring, drilling round holes, and enlarging existing ones. No center punch is needed because the split point allows for easy starting. Its CNC-ground flute enables optimized chip removal and less vibration for smooth drilling. The most optimal cutting edge and absolute smoothness are ensured thanks to axial and radial relief grinding. This step drill bit is suitable for use on thin materials such as non-ferrous metals, sheet plastic, sheet steel, plastic, and stainless steel.
9 steps Ø 4-6-8-10-12-14-16-18-20 mm

The CYL-9 Ceramic tile drill head is a standard drill head for drilling in tiles. The practical drill head is suitable for dry drilling without cooling. The simple design without notches is particularly suitable for drilling in soft to medium-hard tiles. Drilling without impact function at low speeds. The drill head is compatible with power and battery-powered drills with a cylindrical shaft system. Package of 1 piece.

The drill bit has a hexagonal shank system and is compatible with all screwdrivers with a 13 mm chuck. The spiral drill bit is suitable for quick and precise drilling when drilling through holes, pre-drilling for rafter nails, and drilling deep dowel holes in wood. The powerful self-feeding tip pulls the drill bit all the way through, ensuring fast and precise drilling with low power consumption. The optimized low-friction geometry of the drill bit with solid core ensures straight holes, high chip removal, and higher working speed. The optimized guide edge of the drill bit and precision-ground main cutting edge produce precise holes. Suitable for use in construction trades, by carpenters and roofers, it is suitable for both softwood and hardwood
Total length 160 mm

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures fast chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Package contains one piece.

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 5 pieces.

The double-ended screwdriver bit is very robust and suitable for demanding tasks, and can even withstand the high impact of wrenches. The bit has an extended torsion zone, which makes it extremely durable for long-term work. Modified S2 steel and an optimized heat treatment process provide extra durability for high performance in plant installations or heavy industrial work. The set of Pick and Click screwdriver bits with Impact Control in 36 pieces also includes top keys as well as Impact Control Universal Holder Standard Magnetic and Impact Control Universal Holder Quick Release. These holders provide extra grip on the bit when mounting screws with power tools, while the Quick Release function allows for quick and easy changes. The bit is part of the Bosch Pick and Click system, which allows for customized accessory sets. The click-fitting system makes it easy to change bits and drills to get a custom set. It has an external hexagonal shaft of 1/4 inch for use with screwdrivers, especially wrenches.Package with 8 (index)8 double-ended screwdriver bits

It has an external hexagonal shaft of 1/4 inch and is intended for use with screwdrivers and power drills. The One-Click universal holder makes it easy to change bits with extra secure bit retention for universal use of screwdrivers. It has a One-Click function on the shaft that allows you to change bits with one hand while maintaining a firm grip on the bit. In addition, a permanent magnet ensures a secure grip on the bits during use. The universal holder is suitable for all fastening jobs that require power tools.Universal holderwith one-click function and permanent magnet

It is suitable for working with plaster on metal and for use together with the attachment MA 55 for the Bosch screwdriver GSR 6-45 TE. The screw tape has a coarse thread for quick work with plaster walls.
Fine thread
Suitable for plasterboard on metal (up to a thickness of 0.7 mm)

Long life when hole cutting stainless steelExceptional durability is a given with Bosch Carbide Technology.Individually ground teeth made of fine carbide.With integrated thread.

The long ground HSS spiral drill bit for drilling deep holes through metal with maximum precision. Its length allows for deep drilling with this long drill head. The exposed 135-degree two-part self-centering tip of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the two-part tip, it is also unnecessary to mark pilot holes in advance or pilot bore up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. The long ground HSS spiral drill bit is manufactured according to DIN 340. The type N (notch angle) drill head has a 135-degree tip and a diameter tolerance of h8. This drill head is designed for drilling deep holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. It has a cylindrical shaft system (the shaft has the same diameter as the drill head) and is intended for use in drilling stands and screwdrivers
Package with one piece.

Boor, voor zacht hout, hardhout, centreerpuntboor, 8 mm, cilindrisch, lengte: 250 mm