Bosch - pagina 149

The collet clamp clamps cutters
Always use the correct size collet to avoid hazards during use
Do not use on shaft bushings

Routerbit, voor zachthout, hardhout, 13 mm, lengte: 51 mm

Cirkelzaagblad, voor metaal, hout met spijkers, plaatmetaal, non-ferrometaal, epoxy, aluminium profielen, lengte: 225 mm (verpakking van 5)

X440 Best for Wood and Paint removes material with impressive speed when sanding old paint, varnish or wood surfaces. The strong abrasive grain of semi-loose aluminum oxide guarantees effective sanding. In addition, the backing material is made of robust X-cloth with a quality tape joint that ensures high strength during demanding work. Furthermore, the grains are provided with an electrostatic open surface that ensures uniform dust removal and uninterrupted sanding. This product is intended for sanding wood and painted surfaces and is suitable for smoothing out edges. The product is also ideal for planar grinding of grooves and edges. The abrasive grain is attached using a fully synthetic resin bond, which ensures exceptional durability in tough tasks. The X440 Best for Wood and Paint abrasive belt fits belt sanders.
Package of 10 pieces.

De schijf is compatibel met haakse slijpmachines. De borgmoer wordt gebruikt voor het opspannen van schrobschijven met een diameter van 115-230 mm die vóór 08/90 zijn vervaardigd.
Borgmoer
voor het opspannen van alle schijven met Ø 115 - 230 mm gefabriceerd na 08/90.

The lambswool hood is suitable for polishing old paint and surfaces after sanding. It is intended for use with a Bosch polishing sponge ((1 608 613 013), Bosch felt polishing disc (1 608 612 002) or Bosch backing pad (2,608,601,209). The hood is designed for use on polishing machines.
Polishing hood

The CYL-3 drill head ensures long-lasting performance when drilling in concrete. The wear-resistant drill head is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill head's efficient U-shape with 2 notches ensures effective dust removal, less friction, reduced heat generation and wear, and extends the life of the bit. The drill head provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling, and efficient fastening. The drill head is compatible with the cylindrical shaft system for all powered and battery-powered hammer drills.
Concrete Drill Set CYL-3 with 5 pieces

Bosch 2 609 256 915 drill bit 1 pc(s)

Komstaalborstel voor haakse slijpers en rechte slijpers met getwiste roestvrijstalen draad, 75 mm diameter, M14-schroefdraad en een maximale snelheid van 12,500 rpm.

Bosch Cup Steel Brush for angle and straight grinders – twisted wire, stainless, 75 mm heeft een draaddikte van 0.5 mm en is bedoeld voor gebruik op ferrometalen, inclusief wapeningsstaal.

Schroevendraaierbit voor Pozidriv (PZ) kruiskopschroeven met PZ2-kopmaat en 49 mm lengte voor compatibele schroeftaken.

Bosch schroevendraaierbit voor Pozidriv kruiskopschroeven (PZ) is een Bosch-bit ontworpen voor PZ-schroefkoppen, gespecificeerd als maat 2 en uitgevoerd in een lengte van 49 mm.

Platte spadeboor heeft een Self Cut-ontwerp met een diameter van 30.0 mm en een 6.35 mm zeskantschacht.

Bosch Self Cut Flat Spade Bit, hex shank is gespecificeerd met een werklengte van 112 mm en een totale lengte van 152 mm, en is bedoeld voor gebruik met beton, cellenbeton, hout en akoestische panelen.

Metaalboorset met 6 HSS-G boren volgens DIN 338 met cilindrische schacht in de maten 2.0, 3.0, 4.0, 5.0, 6.0 en 8.0 mm.

Bosch 6-delige Metaalboorset HSS-G, DIN 338 is ontworpen voor werk in ferrometalen zoals staal/ijzer, gelegeerd en ongelegeerd staal, grijs gietijzer en plaatmetaal, en kan ook worden gebruikt op kunststoffen, waaronder piepschuim.

Do not use on shaft bushings. The collet clamps the milling cutter. Always use the correct size collet to avoid danger during use.
Collet

M 1131 L
HCS, gelegd, geslepen, zeer scherpe tanden
Grof hout, brandhout, takjes, takken, tuinieren.

Accessoire-adapter, voor hogedrukreiniger, voor Bosch AQT 37-13, AQT 40-13, AQT 42-13, AQT 45-14 X; EasyAquatak 120

Spaakwielborstel, voor metaal, 30 stuks, 100 mm

Boorstift, voor beton, metselwerk, versterkt beton, 10 stuks, 8 mm, SDS-plus, lengte: 165 mm

Tafelzaag rolsteun, lengte: 1.15 m

The hand stapler gun is suitable for universal use for both professionals and DIY enthusiasts. Designed for quick fastening on textiles, roofing felt, foils, paper and insulation materials. The hand stapler gun has a grip release and is made of robust polished steel with padded handle and grip lock. It can be used with staple type 53 with a length of 4, 6 or 8 mm.
Hand stapler gun HT 8
Suitable for quick fastening of fabrics, foil, insulation materials etc.
Robust all-steel construction, padded handle grip lock
Fits staple type 53, length 4,6 ,8 mm

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the shape of the tip with PointTeQ. It is quick and easy to start drilling, as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm since they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (notched angle) with a 135-degree point angle. It has a cylindrical shank system (the same diameter as hammer drills) and is intended for use in drill stands and screwdrivers.
Pack of 10 pieces.

Decoupeerzaagblad met type T 308 B met 2.2 XC mm tandafstand, 117 mm totale lengte en 91 mm getande lengte voor het zagen van hout en zachthout.

Decoupeerzaagblad HCS, T 308 B is gespecificeerd voor toepassingen in hout en zachthout en wordt vermeld met bladtype T 308 B, 2.2 XC mm tandafstand, 117 mm totale lengte en 91 mm getande lengte.

The Impact Control screwdriver bit is very robust and suitable for demanding tasks, and can even withstand the high power of impact wrenches. The bit has an extended torsion zone, which makes it extremely durable for long-term work. Modified S2 steel and an optimized heat treatment process provide extra durability for high performance in plant installations or heavy industrial work. The set of Pick and Click screwdriver bits with Impact Control in 36 pieces also includes sockets as well as the Impact Control Universal Holder Standard Magnetic and Impact Control Universal Holder Quick Release. These holders provide extra grip on the bit when mounting screws with power tools, while the Quick Release function allows for quick and easy changes. The screwdriver bit is part of the Bosch Pick and Click system, which allows for customized accessory sets. The click-fitting system makes it easy to change bits and drills to create an individually tailored set. The bit comes in a plastic holder that can easily be clicked into empty Pick-and-Click boxes (size M & L) for customized bit sets. It has an external hexagonal shaft of 1/4 inch for use with screwdrivers, especially impact wrenches.
Package with 8 pcs (index)

Milling cutter bit, for wood, softwood, hardwood, 6 pieces, hex, length: 56 mm, 51 mm, 54 mm, 65 mm, 55 mm

Jigzaagblad, voor polypropyleen (PP), polyethyleen (PE), lengte: 100 mm (verpakking van 5)