Bosch - pagina 147

Boor- en bitset in metaal, 35-delige assortimentsset geleverd in een dispenser van Bosch.

Bosch Drill/Bit Set Metal 35 Pieces Dispenser is een compacte Bosch set die is ontworpen om boren en bits bij elkaar te houden in één praktische metalen dispenser voor eenvoudige opslag en hantering.

Diamond cutter, voor keramiek, graniet, 60 mm

Filter, voor stofzuiger

Boschsanding blade exc 225mm k220 19h 25 pcs

Boschsanding blade exc 225mm k60 19h 25 pcs

Boschsanding blade exc 225mm k80 19h 25 pcs

Boschsanding blade plan 93x186mm k60 6h 50 pcs

Display

De stofzak is een reserveonderdeel voor het verzamelen van schuurstof. Geschikt voor: GEX 12V-125; GEX 18V-125 Professional.

Cirkelzaag schijf verkleiningsring: Diameter 30 mm, Gat 25.4 mm, Dikte 1.2 mm

It has a 1/4 in. External hex shank for use with drill drivers, screwdrivers and especially impact screwdrivers. The very robust Impact Control screwdriver bit is even suitable for the high torque of impact screwdrivers. The special torsion zone gives the bit an extremely high durability for continuous use, the S2-modified steel and the optimized heat treatment process enable maximum performance under the harshest conditions. This product is perfectly suitable for heavy tasks such as extensive assembly or heavy industrial work.

Bosch 2 609 255 126 schroevendraaierbit 1 stuk(s)

Schroefbit, 100 stuks, 1/4", phillips, PH2, zeskant, lengte: 25 mm

Achterkussen, 150 mm

The collet clamp clamps cutters
Always use the correct size collet to avoid hazards during use
Do not use on shaft bushings

Decoupeerzaagbladenset met 3 stuks en T-schacht, settype Extra-Clean voor hardhout, ontworpen voor het zagen van hout inclusief hard/massief hout en akoestische panelen.

Bosch Decoupeerzaagbladenset met 3 stuks, T-schacht bevat 2 x T 308 BF en 1 x T 308 BOF, waardoor je een praktische selectie hebt voor houtbewerkingsklussen waarbij een schoon resultaat vereist is.

Komstaalborstel voor haakse slijpers en rechte slijpers met getwiste roestvrijstalen draad, 75 mm diameter, M14-schroefdraad en een maximale snelheid van 12,500 rpm.

Bosch Cup Steel Brush for angle and straight grinders – twisted wire, stainless, 75 mm heeft een draaddikte van 0.5 mm en is bedoeld voor gebruik op ferrometalen, inclusief wapeningsstaal.

Schroevendraaierbit voor Pozidriv (PZ) kruiskopschroeven met PZ2-kopmaat en 49 mm lengte voor compatibele schroeftaken.

Bosch schroevendraaierbit voor Pozidriv kruiskopschroeven (PZ) is een Bosch-bit ontworpen voor PZ-schroefkoppen, gespecificeerd als maat 2 en uitgevoerd in een lengte van 49 mm.

Platte spadeboor heeft een Self Cut-ontwerp met een diameter van 30.0 mm en een 6.35 mm zeskantschacht.

Bosch Self Cut Flat Spade Bit, hex shank is gespecificeerd met een werklengte van 112 mm en een totale lengte van 152 mm, en is bedoeld voor gebruik met beton, cellenbeton, hout en akoestische panelen.

Universal long-sleeved connector connects 19 mm vacuum hoses to Bosch vacuums.
Hose sleeve

The protective screen for Turbo eccentric sanders is a practical solution to avoid damaging the corners of the workpiece, while also supporting and protecting the backing pads - especially when sanding in corners. Its design makes it robust, and it can easily be attached to the Turbo eccentric sander's mounting system simply by clicking it on and off. Protective screen for GET 75-150

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The tapered torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks. Drive unit ISO 1173 C6.3, 1/4" external hexagon

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures fast chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 10 pieces.

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 5 pieces.