Bosch - pagina 148

Y580 Best for Inox has an excellent speed for removing material on Inox surfaces. The stable X-cloth back is stable and durable during the grinding process and guarantees impressive surface results. In addition, the abrasive grains of zirconia aluminum ensure impressive fast material removal as well as high wear resistance. The additional cooling ensures seamless grinding without discoloration of the subject. Designed for general use with difficult metal materials, including welding and joints, and for sanding scale skin. Also suitable for stainless steel and titanium as well as non-ferrous metals. The sanding sheet is characterized by electrostatic, compact grain distribution and cooling additives that ensure optimal sanding properties on metal surfaces. The abrasive grain is attached using a fully synthetic resin bond on X-cloth, ensuring high stability and wear resistance as well as quick removal of material in demanding tasks. The Y580 Best for Inox sanding belt fits a belt sander

The Expert for Wood Straight Bit Solid Carbide is designed for long life and intense, daily use to achieve splinter-free cuts. The drill head is milled and ground internally based on hardened extra hard Microteq carbide for durability and high performance when used on wood. In addition, it has a protective coating that protects it from friction buildup, rust, and height that extends the drill head's outstanding cutting life. The drill head is made using computer-controlled balancing to give it high centricity with perfect rotational symmetry for precise, smooth cuts. It is intended for milling small and very precise grooves in soft and hard solid wood and composite wood as well as in special materials such as solid surfaces. They are particularly suitable for milling narrow grooves, e.g., for notching and jointing. Expert For Wood straight router bits have a special clearance angle that makes plunge cutting easy to perform. It is suitable for use with handheld, table-mounted portable routers machines or CNCs.

Routerbit, voor hout, massief hout, hardhout, samengesteld hout, Dado, 20 mm, lengte: 56 mm

It consists of two blades and four screws. The six-piece scissor blade set is a set with extra blades for Bosch slitting shears. Knife, chrome steel for cutting Inox

X440 Best for Wood and Paint removes material with impressive speed when sanding old paint, varnish or wood surfaces. The strong abrasive grain of semi-loose aluminum oxide guarantees effective sanding. In addition, the backing material is made of robust X-cloth with a quality belt joint that ensures high strength during demanding work. Furthermore, the grains are provided with an electrostatic, open surface that ensures uniform dust removal and uninterrupted sanding. This product is intended for sanding wood and painted surfaces and is suitable for smoothing out edges. The product is also ideal for planing grooves and edges. The abrasive grain is attached using a fully synthetic resin bond, which ensures exceptional durability in tough tasks. The X440 Best for Wood and Paint sanding belt fits belt sanders.
Package of 3 pieces.

The dowel devil is made of beech wood. The dowel devil is professional dowel accessory. This sturdy and user-friendly accessory prevents rotation thanks to its ribbed design. The dowel is suitable for all round wooden dowel joints and comes in diameters of 6, 8, and 10 mm

Multi-tool blade, for grout, 70 mm

They are designed for Bosch universal tandem saws. TF 350 M HCS saw blade set, 2 pieces guarantee efficient cutting, as two blades cut together in tandem. The set's blades are intended for cutting materials up to 408 mm thick. At the same time, the blades are made of HCS material, which makes them effective for cutting insulation materials such as rock wool, glass wool and wood wool.
Knife set with 2 parts TF 350 WM
for insulation materials such as rock wool (green), glass wool (yellow), wood wool

6 holes. For Black & Decker, Bosch, Makita, Metabo, Skil,..

Schijf-staalborstel voor boormachines met gegolfde draad, 100 mm diameter, 0.3 mm draaddikte en een maximale snelheid van 4500 rpm.

Schijf-staalborstels voor boormachines – gegolfde draad, 100 mm heeft een 6 mm schachtdiameter en 8 mm borstelbreedte, geschikt voor gebruik op ferrometalen en wapeningsstaal.

Schroevendraaier, boor en dopsleutelset, voor hout, metaal, metselwerk, verzinkboor, spiraalboor, 34 stuks, torx-, phillips-, pozidriv- en sleufkopbits van 7 mm tot 10 mm lang: 25 mm

System accessories; Extra spool with thread 8 m

The hand sanding block is designed for sanding large surfaces such as wood, metal and plasterboard. It has stable, strong sides for flat work and a clamping system for attaching all standard sandpaper sheets, rolls and mesh.
Suitable for sanding large wood, metal and plasterboard surfaces
For sandpaper sheets and mesh

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The tapered torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks. Drive unit ISO 1173 C6.3, 1/4" external hexagon

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures fast chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 10 pieces.

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 5 pieces.

Schuurpapier vellen set met 25 schijfvormige vellen, korrel 40, formaat 125 mm voor gebruik met excenterschuurmachines.

Bosch schuurpapier vellen set, 25 stuks, voor excenterschuurmachines, korrel 40 biedt een praktische verpakking met ronde schuurvellen, ontworpen voor consistent schuurwerk waar een grove korrel vereist is.

Slijpschijf, voor metaal, 230 mm

Slijpschijf, voor roestvrij staal, inox staal, 2 stuks, 76 mm

Schroefbit met T-schroefkop, maat 25, en 25 mm lengte voor compatibele schroefwerkzaamheden.

Standaard T schroefbit is gespecificeerd met een T (Torx) schroefkop, schroefkopmaat 25 en 25 mm lengte, waardoor het eenvoudig is de bit af te stemmen op de vereiste schroefkop en toepassing.

Metaalborenset met HSS-G-ontwerp volgens DIN 338, 3 mm diameter en geschikt voor gietijzer, metaal, kunststof en roestvrij staal.

Bosch Metaalboor HSS-G, DIN 338 is ontworpen voor normaal gebruik met een boormachine en bevat 2 boren met een werklengte van 3.3 cm.

Drill bit set, for wood, brad point bit, 5 pieces, 5 mm, 6 mm, 8 mm, 10 mm, 4 mm

X440 Best for Wood and Paint removes material with impressive speed when sanding old paint, varnish or wood surfaces. The strong abrasive grain of semi-loose aluminum oxide guarantees effective sanding. In addition, the backing material is made of robust X-cloth with a quality tape joint that ensures high strength during demanding work. Furthermore, the grains are provided with an electrostatic open surface that ensures uniform dust removal and uninterrupted sanding. This product is intended for sanding wood and painted surfaces and is suitable for smoothing out edges. The product is also ideal for planar grinding of grooves and edges. The abrasive grain is attached using a fully synthetic resin bond, which ensures exceptional durability in tough tasks. The X440 Best for Wood and Paint abrasive belt fits belt sanders.
Package of 3 pieces.