Zaagblad, voor cellenbeton, 3 stuks, lengte: 300 mm, breedte: 22 mm

Schroefboormachine, zonder snoer, 2 snelheden, chuck zonder sleutel 10 mm, 30 N·m, 2 batterijen, inclusief oplader, 12 V

Grasmaaier, zonder snoer, 18 V, 4 Ah, 32 cm, 8.8 kg

Boorstift, voor beton, metselwerk, versterkt beton, graniet, gneis, hamerboor, 30 mm, SDS-plus, lengte: 450 mm

Boorstift, voor beton, metselwerk, versterkt beton, graniet, gneis, hamerboor, 16 mm, SDS-plus, lengte: 315 mm

Het heeft een externe zeshoekige schacht van 1/4 inch voor gebruik met boorschroeven, schroevendraaiers en vooral met impactschroeven. De zeer robuuste Impact Control-schroevendraaierbit is ook geschikt voor hoog koppel impactschroevendraaiers. De speciale torsiezone geeft de bit zeer lange duurzaamheid voor continu gebruik, S2-gemodificeerd staal en het geoptimaliseerde warmtebehandelingsproces bieden maximale prestaties onder de zwaarste omstandigheden. Dit product is perfect voor zware taken zoals uitgebreide montage of zwaar industrieel werk.

26mm diameter flat milling cutter with a working length of 112mm

Bosch Expert C470 schuurschijven

Do not use on shaft bushings. The collet clamps the milling cutter. Always use the correct size collet to avoid danger during use.
Collet

Cirkelzaagblad, voor hout, lengte: 150 mm (pak van 100)

Bosch Lumberjack helm met vizier +3 jaar 28x20x28cm

Zigzaglemmet, voor hardhout, abrasive wooden materials, laminated plastic panel, multiplex panels, 25 stuks, lengte: 117 mm

V-Line TiN drill and bit set with ratchet screwdriver and magnetic rod containing 91 pieces

Zaagblad, voor hout, 250 mm, 80 tanden

Boor, spiraalboor, 13 mm, cilindrisch, lengte: 151 mm

Boorset, spiraalboor, 19 stuks

The Optiline Wood circular saw blade provides precise cuts in all types of wood. The blade's high-quality precision-ground carbide teeth provide clean cuts, while its core blade, made of dimensionally stable SK5 hardened steel (> 40 HRC), ensures accuracy. At the same time, the blade's expansion slots reduce vibration during use, which has a noise-reducing effect and reduces heat development. This saw blade is used in all types of wood and wood materials. Depending on the number of teeth, different results can be achieved with all Optiline Wood circular saw blades that have ATB tooth geometry (Alternate Top Bevel): when the blade is equipped with a high number of teeth, it provides clean cuts, whereas a low number of teeth provides powerful and efficient cuts. It is compatible with handheld miter saws, compound miter saws and table saws.

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill bit is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill bit's efficient U-shape with 2 flutes ensures effective dust removal, less friction, reduced heat development and wear, and extends the life of the drill bit. The drill bit provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill bit is PGM-certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill bit is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Robust Line Concrete Drill Bit Set CYL-3 with 5 pieces

The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly, so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers.
Package with one piece.

Boor, voor zachthout, hardhout, brad point boor, 14 mm, cilindrisch, lengte: 151 mm

Cirkelzaagblad, voor hout, 85 mm, 20 tanden

The Bosch S 123 XF saber saw blade is an excellent tool for anyone looking for an efficient and precise solution for cutting metal. Thanks to its versatile design, this blade is suitable for both professionals and amateurs who value quality and efficiency in their work.

Boorstift, hamerboor, 12 mm, SDS-plus, lengte: 315 mm

Zigzaglemmet, voor hardhout, abrasive wooden materials, multiplex panels, plastic coated board, 5 stuks, T-schacht, lengte: 117 mm

Conditioning oil, fles, 100 ml