Bosch - pagina 141

The fine wire staples fit staple guns from the following brands: AEG, Arrow, Black+Decker, Bosch, Esco, kwb, Maestri, Mekano, Metabo, Neckermann/Bullcraft Novus Outifrance Piranha Rocagraf Stanley Skil and Wolfcraft. The fine wire staples type 53 are ideal for a multitude of general DIY tasks and professional stapling jobs. They are suitable for a wide range of thin materials such as fabrics paper flat wooden mouldings and wire mesh fencing. In addition the staples are particularly suitable for applications where the staple back should not be pressed into the material. The staples have a narrow back that allows them to penetrate deeply into the material providing good grip with a very discreet staple back. Weather-resistant stainless steel staples

They are intended for use with parallel guide 2 607 001 387 and router circle cutter 2 609 200 143 and are suitable for routers. The extra-long guide rods extend up to 800 mm when greater length is required.
Guide rod
Fits all routers with a guide rod diameter of 10 mm, hole spacing of100 mm

System accessory PRR 250 ES; Lamella roller

The narrow-backed staples fit staplers from the following brands: AEG, Bosch, Black+Decker, Bukama, Esco, kwb, Lux, Metabo, Novus and Wolfcraft. The narrow-backed staples type 55 are ideal for general DIY tasks and professional stapling tasks. They provide extra strong joints and are ideal for a wide range of thin and also thicker materials. The staples have a narrow back so they can penetrate deeply into the material and provide a good grip with a very discreet staple back. They are particularly suitable for stapling thin materials where the staple back must not be pressed into the material

They can be used for staplers from AEG, Bosch, Esco, Kwb, Lux, Mekano, Metabo, Novus, Peugeot, Rocafix , Rocagraf , Stanley , Swingline and Wolfcraft. The staples type 47 are for fastening thin and thick materials. They are made of hardened steel wire with a length between 16 and 30 mm. The width of the head is 1.8 or 2.8 mm depending on the device

The crevice tool fits vacuum hoses on Bosch vacuums. The crevice tool is specially designed to reach hard-to-access places. It is ideal for reaching into corners and down into joints.
Crevice nozzle

The vacuum cleaner tube is intended for Bosch vacuum cleaners.
Tube

Designed for all Bosch hot air guns. The glass protection nozzle for the hot air gun has special side protectors that protect heat-sensitive materials such as glass.
Glass protection nozzle with special side protection. Protects heat-sensitive materials such as glass

It is intended for use with planers or for hand grinding. The hole punch punches holes in grinding blades that lack holes. It is made of plastic.
Punching tool in plastic

They are designed for the Bosch compressed air nail gun GSK 18 V-Li Professional. The staples with countersunk head 20°, 1.6/16 g, are made of weather-resistant stainless steel. They are suitable for box construction, furniture upholstery, door and window frames, picture frames, furniture manufacturing, wall cladding and fiber gypsum board. These staples with countersunk head also provide a strong joint with heads that are virtually invisible, making it quick and easy to install board cladding, baseboards and decorative moldings. The staples with countersunk head 20° ,1.6/16 g ,are made in Europe which ensures consistent high quality.
Stainless steel design

The drill chuck with key is a simple and secure solution for attaching drills to all tasks. With uniform clamping force for secure attachment of drills with cylindrical or hexagonal shank. The jaws are easily tightened and loosened with a key, which provides easy handling. Drill chucks with keys are available in different holders (1/2" - 20, 3/8" - 24, 5/8" - 16, B16 and SDS plus) for a wide range of capacities and are compatible with most common drills. See the technical information to learn more about impact resistance or suitability for counterclockwise rotation.
Hammer-resistant design

The SDS plus-5 drill bit ensures problem-free drilling. The grooved carbide tip with notches ensures smooth drilling and easily penetrates the material without getting stuck, even in concrete. The Activeteq centering tip guides the drill position from the start without shaking or displacement and ensures precise hole diameter. AWB soldering and hardening technology reduces vibration during drilling, so the user is not burdened. The drill bit is suitable for masonry and concrete. The visible wear indicator shows if the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill head is made in Germany. Compatible with SDS plus holder rotary hammers.
Package of 1 piece.

The conical grinding cups provide a long lifespan when grinding metal and cast iron. Its high-quality aluminum oxide abrasive grain with synthetic resin bonding is designed for durability in metal applications. It is intended for grinding metal and cast iron. The best results and the greatest safety are achieved by using the conical grinding cups only with two-handed angle grinders with a maximum speed of 8500 o o/min. It is suitable for use with two-handed angle grinders with a maximum speed of 8500 o o/min

The conical grinding cups provide a long lifespan when grinding metal and cast iron. Its high-quality aluminum oxide abrasive grain with synthetic resin bonding is designed for durability in metal applications. It is intended for grinding metal and cast iron. The best results and the greatest safety are achieved by using the conical grinding cups only with two-handed angle grinders with a maximum speed of 8500 o o/min. It is suitable for use with two-handed angle grinders with a maximum speed of 8500 o o/min

Drill bit, for concrete, masonry, hammer bit, 24 mm, SDS-plus, length: 450 mm

The SDS max-9 Stone drill bit has a long lifespan in stone. The drill bit has two main cutting edges and two robust side bolts, which extend the lifespan. The drill bit is made of a high-quality, wear-resistant carbide material that ensures long life and great durability. The vibration-optimized design with 2+2 grooves also ensures optimal power transmission during drilling. The drill bit is intended for drilling in stone. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, precise drilling, and efficient fastening. It is compatible with all SDS max holders on rotary hammers.
Package contains 1 piece.

It is compatible with SDS max shaft systems. The SDS max shovel chisel provides easy loosening of very compact soil and ground to enable digging. Its rounded and tapered blade design ensures maximum precision.
Shovel Chisel
SDS max shovel chisel for easy loosening of very compact soil and other substrates to enable digging

Spanmoer

The self-tightening drill chuck is intended for Bosch hammer drills. The self-tightening drill chuck is a Bosch system drill chuck with a clamping capacity of Ø 1.5 to 13 mm. It easily tightens the drill and does not require a key. The self-tightening drill chuck is intended for Bosch hammer drills. Self-tightening drill chuck, chrome-plated

This drill bit is compatible with a 1/4 inch hexagonal shaft system for versatile use with screwdrivers, impact wrenches and drilling rigs. The Impact Control HSS spiral drill bit provides extremely robust drilling in metal, especially with screwdrivers. The extremely strong core is extremely robust. The spiral hammer drill bit is precision ground from solid metal and has an oxidized notch that gives it outstanding surface quality for cutting through materials with reduced wear. It is suitable for use on alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, non-ferrous metals, sheet metal and plastic.
Package of 1 piece.

The reducer ring for circular saw blades has an adjustable holder hole, so the ring fits perfectly on all machines.
Reducer rings for circular saw blades
Tooth thickness from 1.7 mm to max. 2.2 mm

Pre-filter, UniversalVac 18