Bosch - pagina 142

The extension has a 1/4 inch hexagonal shaft and is intended for use with screwdrivers. The hexagonal shaft extension for 1/4-inch Self-Cut Speed flat drills ensures greater range when drilling. The extension comes in two different lengths of 152 mm and 305 mm, and is suitable for all flat drill tasks where greater range is needed.
Extension 1/4" (6.35 mm) hexagonal shaft for Self Cut Speed flat drills

Nietjes type 55 bieden een breedte van 6.0 mm, een dikte van 1.08 mm en een lengte van 28.0 mm voor consistente bevestiging.

Nietjes type 55 zijn ontworpen voor gebruik met natuurlijke materialen, papier, folies, kunststof, kunststofplaten, hout, akoestische panelen en kunstgras-tapijt, waardoor ze geschikt zijn voor een breed scala aan bevestigingstaken.

Boorhamerboor SDS plus met 8 mm diameter, 150 mm werklengte en 210 mm totale lengte voor boren in steen, metselwerk, graniet, beton en gewapend beton.

Boorhamerboor SDS plus is gespecificeerd voor gebruik op steen- en metselwerkmaterialen, waaronder graniet, beton en gewapend beton, en past op SDS plus gereedschap voor een veilige, compatibele bevestiging.

• Diameter: 8 mm
• Werklengte: 150 mm
• Totale lengte: 210 mm

Beitel, voor beton, baksteen, spade, zeskant, lengte: 400 mm, breedte: 80 mm

Fladdyvel GR 0

Boor, voor hout, centreerpuntboor, 5 mm, lengte: 85 mm

Diepteaanslagset met 3 stuks in 6.0, 8.0 en 10.0 mm voor gecontroleerd boren.

3-delige diepteaanslagset is geschikt voor houttoepassingen, waaronder hardhout/massief hout, zachthout en akoestische panelen, en helpt je een consistente boordiepte te behouden bij verschillende boorbitdiameters.

Pijp voor externe afzuiging met Bosch universele stofzuiger PAS

Router bit, for wood, solid wood, hardwood, composite wood, Dado, 8 mm, length: 52 mm

X440 Best for Wood and Paint removes material with impressive speed when sanding old paint, varnish or wood surfaces. The strong abrasive grain of semi-loose aluminum oxide guarantees effective sanding. In addition, the backing material is made of robust X-cloth with a quality belt joint that ensures high strength during demanding work. Furthermore, the grains are provided with an electrostatic, open surface that ensures uniform dust removal and uninterrupted sanding. This product is intended for sanding wood and painted surfaces and is suitable for smoothing out edges. The product is also ideal for planing grooves and edges. The abrasive grain is attached using a fully synthetic resin bond, which ensures exceptional durability in tough tasks. The X440 Best for Wood and Paint sanding belt fits belt sanders.
Package of 3 pieces.

Boorset, voor metaal, spiraalboor, 25 stuks

X440 Best for Wood and Paint removes material with impressive speed when sanding old paint, varnish or wood surfaces. The strong abrasive grain of semi-loose aluminum oxide guarantees effective sanding. In addition, the backing material is made of robust X-cloth with a quality belt joint that ensures high strength during demanding work. Furthermore, the grains are provided with an electrostatic, open surface that ensures uniform dust removal and uninterrupted sanding. This product is intended for sanding wood and painted surfaces and is suitable for smoothing out edges. The product is also ideal for planing grooves and edges. The abrasive grain is attached using a fully synthetic resin bond, which ensures exceptional durability in tough tasks. The X440 Best for Wood and Paint sanding belt fits belt sanders.
Package of 3 pieces.

Boor, voor metaal, spiraalboor, 10 stuks, 9.5 mm, lengte: 125 mm

Routerbit

Schroevendraaier bit, 3 stuks, torx, T30, hexagonaal, lengte: 25 m

Schuurpad, 150 mm, rond

Schroevendraaierset met 11 stuks inclusief een flexibele plastic verlenging (300 mm).

The polishing set S24 with 8 parts is for polishing with all types of standard drills with a chuck of at least 8 mm in diameter. The discs have a diameter of 125 mm and can be used at speeds up to 4,500 rpm.
Polishing set S24 with 8 parts
Backing pad, polishing sponge, polishing cap, grinding discs (corundum/paper)

Schroevendraaier- en boorset, voor hout, metaal, beton, 91 stuks

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering tip of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral bore head is manufactured according to DIN 338. The bore head is of type N (notch angle) with a 135-degree tip and a diameter tolerance of h8. It has a cylindrical shaft system (the shaft has the same diameter as the bore head) and is intended for use in drilling stands and screwdrivers.
Package with one piece.

Draadkopborstel, voor metaal, staal, verf, vernis, 75 mm, M14

SDS max RTec Sharp flat chisel is ideal for various tasks in concrete and provides less jamming and faster progress than standard flat chisels. Its self-sharpening power ribs create not only transverse but also vertical cracks in the material. This provides a higher speed of material removal and prevents the chisel from getting stuck. The chisel is intended for use in concrete and bricks for tasks such as folding, demolition, adaptation work, as well as renovation of joints and clearing reinforcements. The patented RTec element delivers a higher speed of material removal than standard flat chisels do. It is compatible with SDS max shaft systems.
Self-sharpening RTec Speed flat chisel with long lifespan and 100% higher speed of material removal
SDS max RTec Sharp flat chisel is ideal for various tasks in concrete

Designed for the wall chaser GDC 125 Professional. The parallel guide allows for milling parallel in adjacent grooves.
Parallel guide for circular saws