Bosch - pagina 143

Boor, voor hout, centreerpuntboor, 8 mm, lengte: 110 mm

Schuurpad adapter, 150 mm

The extension has a 1/4 inch hexagonal shaft and is intended for use with screwdrivers. The hexagonal shaft extension for 1/4-inch Self-Cut Speed flat drills ensures greater range when drilling. The extension comes in two different lengths of 152 mm and 305 mm, and is suitable for all flat drill tasks where greater range is needed.
Extension 1/4" (6.35 mm) hexagonal shaft for Self Cut Speed flat drills

Diamond cutting disc, for reinforced concrete, hardened concrete, 125 mm

Beitel, voor beton, baksteen, spade, zeskant, lengte: 400 mm, breedte: 80 mm

Boor, voor hout, centreerpuntboor, 5 mm, lengte: 85 mm

Nietjes type 53 leveren een lengte van 6.0 mm met 11.4 mm breedte en 0.74 mm dikte voor nietklussen in materialen zoals textiel/weefsel, tapijt, houten akoestische panelen en kunstgrasmat.

Nietjes type 53 zijn gespecificeerd als type 53 en ontworpen voor consistente bevestiging in een reeks veelvoorkomende materialen, met duidelijk vermelde afmetingen om aan je gereedschap- en toepassingsbehoeften te voldoen.

Boor, voor hout, centreerpuntboor, 4 mm, lengte: 70 mm

STIKSAVKL T 144 D-C WOOD 100 pcs.

Diepteaanslagset met 3 stuks in 6.0, 8.0 en 10.0 mm voor gecontroleerd boren.

3-delige diepteaanslagset is geschikt voor houttoepassingen, waaronder hardhout/massief hout, zachthout en akoestische panelen, en helpt je een consistente boordiepte te behouden bij verschillende boorbitdiameters.

Boor, spiraalboor, 3.5 mm, cilindrisch, lengte: 70 mm (pak van 10)

Voor lamellenfreesmachines worden gebruikt voor het frezen van verbindingen voor 4 mm lamellen. Het freest sterke verbindingen met een perfecte pasvorm in massief hout en samengesteld hout.
Schijfsnijders

Drill bit set, 5 pieces, 5 mm, 6 mm, 8 mm, 10 mm, SDS-plus, length: 160 mm, 110 mm, for UniversalHammer 18V

Multitool mes, voor tegels, voegwerk, cellenbeton, epoxy, vezelcementplaat met cement gebonden, 85 mm

The SDS max-9 Natural Stone drill bit has a long lifespan in natural stone. The drill bit has two main cutting edges and two robust side bolts, which extend the lifespan. The drill bit is made of a high-quality carbide material that ensures long life and great durability. The vibration-optimized design with 2+2 grooves also ensures optimal power transmission during drilling. The drill bit is intended for drilling in natural stone. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, accurate drilling, and efficient fastening. It is compatible with all hammer drills with SDS max holders.
Package of 1 piece.

Snelspanboorhouder, 1,5-13 mm

The disc steel brush provides an extra fine surface finish. The disc is equipped with copper-coated, corrugated wire for easy and moderately demanding cleaning tasks on small surfaces. It is ideal for removing heat tint on welds and also suitable for cleaning smaller surfaces in metal or non-ferrous metals, edges or grooves. This disc steel brush is also suitable for removing rust, roughening, matting, texturing and sanding paint on metal and wood. The copper-coated wires on the disc provide protection against corrosion. Brush wires are available in different thicknesses depending on how strong the abrasive effect needs to be. Thicker wires are more aggressive and provide a coarser but faster surface finish while thinner wires provide finer, smoother surface results. It is intended for use with drills with a 6 mm shaft.Disc steel brush - corrugated wire, brass-plated
Optimally suitedfor removal of heat tint on welds.
Suitable foreasy to moderately demanding cleaning tasks on small surfaces,in grooves or edges of metal or non-precious metals such as removal of rust,ruffling,mattering,paint removal,and processing wood.
Advantage:Corrosion protection thanks to brass-plated wire

Designed for Bosch vacuum cleaner GAS 15 L Professional. The hose adapter is an accessory for connecting the vacuum cleaner hose to the power tool.
Hose adapter

The long ground HSS spiral drill bit for drilling deep holes through metal with maximum precision. Its length allows for deep drilling with this long drill head. The exposed 135-degree two-part self-centering tip of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the two-part tip, it is also unnecessary to mark pilot holes in advance or pilot bore up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. The long ground HSS spiral drill bit is manufactured according to DIN 340. The drill head is of type N (not angle) with a 135-degree tip and a diameter tolerance of h8. This drill head is designed for drilling deep holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. It has a cylindrical shaft system (the shaft has the same diameter as the drill head) and is intended for use in drilling stands and screwdrivers
Package contains one piece.

Bosch 2 609 256 802 circular saw blade 13 cm

Schroevendraaier bit, 3 stuks, torx, T20, T25, T30, hexagonaal, lengte: 89 mm

Decoupeerzaagblad type T 101 BF met 2.7 mm / 9 TPI tandsteek, 100 mm totale lengte en 76 mm getande lengte voor het zagen van hout en akoestische panelen.

Bosch Decoupeerzaagblad BIM, T 101 BF is een Bosch-blad gespecificeerd als type T 101 BF, met 2.7 mm / 9 TPI tandsteek en een 76 mm getand zaaggedeelte op een blad van 100 mm, geschikt voor hout en akoestische panelen.

HSS countersink drill head with hexagonal shaft creates smooth countersinks for screws and deburring of holes in hard materials. The ground countersink drill head made of HSS (high-speed steel) has an optimal surface quality for even work. Outstanding results in hard materials are possible thanks to three 90-degree cutting edges that function continuously, without vibrations or burrs. High power transmission thanks to the hexagonal shaft provides a flat hole sink. It is suitable for use on non-ferrous metals, steel, and cast iron and has a hexagonal shaft system for versatile use. The HSS countersink drill head with hexagonal shank is manufactured according to DIN 335. The best result is achieved by working at low cutting speeds. It can also be used with impact wrenches

Sisal koord borstel voor het voorpolijsten.