Bosch - pagina 139

X440 Best for Wood and Paint removes material with impressive speed when sanding old paint, varnish or wood surfaces. The strong abrasive grain of semi-loose aluminum oxide guarantees effective sanding. In addition, the backing material is made of robust X-cloth with a quality belt joint that ensures high strength during demanding work. Furthermore, the grains are provided with an electrostatic, open surface that ensures uniform dust removal and uninterrupted sanding. This product is intended for sanding wood and painted surfaces and is suitable for smoothing out edges. The product is also ideal for planing grooves and edges. The abrasive grain is attached using a fully synthetic resin bond, which ensures exceptional durability in tough tasks. The X440 Best for Wood and Paint sanding belt fits belt sanders.
Package of 3 pieces.

Pijp voor externe afzuiging met Bosch universele stofzuiger PAS

The Speedline Wood circular saw blade provides precise length and cross-section cuts in all types of wood. Its high-quality precision-ground carbide teeth make the blade strong enough for fast cutting, while its core blade, made of dimensionally stable SK5 hardened steel (> 40 HRC), ensures accuracy. At the same time, the blade's expansion slots reduce vibration during use, which has a noise-reducing effect and reduces heat development. This saw blade is suitable for use with all types of wood and wood materials. The Speedline Wood circular saw blade provides precise length and cross-section cuts in all types of wood. It is compatible with handheld saws and table saws.

To Black & Decker, Bosch, Makita, Metabo, Skil,..

They are intended for use with parallel guide 2 607 001 387 and router circle cutter 2 609 200 143 and are suitable for routers. The extra long guide rods extend up to 800 mm when greater length is required.
Guide rod

Parallel/hoekgeleider

Sanding paper J450 Expert for Wood and Paint, width: 115 mm, length: 5 m, grit: 80

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The bit's tapered torsion zone easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks

They are suitable for jigsaws with U-shank (universal shanks) of all brands of power tools. The U 118 B Basic for Metal jigsaw blade makes straight cuts in metal. Its milled wavy tooth shape is ideal for cuts without special requirements. The blade made of fully hardened, premium high-speed steel is suitable for sawing non-perforated metal sheets of standard thickness. In addition, the blade's fine tooth height (1.9-2.3 mm) cuts many different metal sheets with a thickness of 2.5-6 mm.
U 118 B
HSS, wavy, milled
Medium-thick plates (2.5-6 mm)

Professionele polijstset.

Boor, voor zacht hout, hardhout, brad point boor, 20 mm, cilindrisch, lengte: 200 mm

Nibbler die plate, for sheet metal, corrugated metal

Drill bit, for wood, metal, twist bit, 22 mm, SDS-plus, length: 400 mm

This universal matrix is designed for straight cuts and curved cuts in metal when used together with Bosch sheet punches. It is easy to use, even for narrow cuts in a variety of types of sheet metal. It also handles complicated cutouts without deforming the material.
Special matrix and punch suitable for corrugated sheets and almost all trapezoidal sheets up to 1.2 mm

Doorslijpschijf voor metaal, ontworpen voor ijzer, met 115 mm diameter, 22.23 mm boring en 2.5 mm dikte.

Bosch rechte doorslijpschijf, metaal is een met Bosch compatibele doorslijpschijf die per verpakking als 1 stuk wordt geleverd, gespecificeerd als A 30 S BF en geschikt voor het doorslijpen van ferrometalen zoals staal/ijzer en betonstaal.

Boorset, voor metaal, spiraalboor, 9 stuks, zeskant

Boorset, voor zacht hout, hardhout, slangenboor, 6 stuks, 10 mm, 12 mm, 14 mm, 20 mm ,18mm ,16mm ,zeskantig (hex), lengte: 235mm

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill head is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill head's efficient U-shape with 2 notches ensures effective dust removal, less friction, reduced heat generation and wear, extending the life of the bit. The drill bit provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling and efficient fastening. The drill head is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package contains 1 piece.

It fits external square connections of 1/2 inch and is suitable for SDS plus shank systems. The SDS plus adapter is very robust and specifically designed to withstand the high power of drilling hammers. The adapter is made of modified S2 steel using an optimized heat treatment process, making it extra durable for high performance and extremely robust for long-term work. This makes the product ideal for demanding screwing tasks, such as plant installations or heavy industrial work. Adapter for sleeves, SDS plus shank

Slijpsteen voor bankslijpmachine met 175 mm diameter, 25 mm dikte, 32 mm boring en 60 korrel.

Bosch grinding wheel for bench grinder is gespecificeerd als A 60 P4 V6 met capaciteit GSM 175, en wordt geleverd als 1 stuk per verpakking voor Bosch-compatibele opstellingen.

The mixer tool has a shaft with an external hexagon and mixes materials from top to bottom without splashing. It has an external M14 thread and is suitable for emulsion, high-gloss paint, cement, joint compound, and cement-bound materials. The tool is intended for drill machines with manual mixing function such as GRW 9, GRW 11, GRW 12E and GRW 18-2E.
Stirring tool
SW 13 mm, drill chuck 16 mm