Bosch - pagina 127

Bitset met 3 dubbelbladige bits voor Pozidriv-kruiskopschroeven en sleufschroeven (PH, S), 60 mm lengte, met 1/4" uitwendige zeskantschacht.

3-delige dubbelbladige bitset voor Pozidriv-kruiskopschroeven en sleufschroeven (PH, S) bevat S0.6x4.5-PZ1, S0.8x5.5-PZ2 en S1.2x6.5-PZ3 bits, ontworpen voor gebruik met 1/4" uitwendige zeskant-houders.

Borenset bevat 5 houtboren met cilindrische schacht in de maten 4, 5, 6, 8 en 10 mm, geleverd in een hangdoos met een draagkoffer.

Bosch 5-delige houtspiraalborenset is ontworpen voor normaal gebruik met een boormachine en is geschikt voor boren in hout, waaronder hardhout/massief hout, zachthout en akoestische panelen.

The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly, so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers.
Package with one piece.

Boor, spiraalboor, 6 mm, cilindrisch, lengte: 93 mm

Boor, spiraalboor, cilindrisch, lengte: 86 mm

Boor, spiraalboor, 2 stuks, 3.5 mm, cilindrisch, lengte: 70 mm

The step drill bit is made of HSS (high-speed steel) and provides a long lifespan when used with coolant. Laser-marked numbers on both flutes provide highly visible and durable marking of the hole diameter. Additionally, the 3-flat shank prevents slipping in the drill chuck and provides efficient transmission with high torque. The HSS step drill head delivers smooth, burr-free drilling in multiple diameters with a single bit. It is ideal for deburring, drilling round holes, and enlarging existing ones. No center punch is needed because the split point allows for easy starting. Its CNC-ground flute enables optimized chip removal and less vibration for smooth drilling. The most optimal cutting edge and absolute smoothness are ensured thanks to axial and radial relief grinding. This step drill bit is suitable for use on thin materials such as non-ferrous metals, sheet plastic, sheet steel, plastic, and stainless steel.
9 steps Ø 4-5-6-7-8-9-10-11-12 mm

Boor, spiraalboor, 3 mm, cilindrisch, lengte: 61 mm (pak van 10)

The double-ended screwdriver bit is very robust and suitable for demanding tasks, and can even withstand the high impact of wrenches. The bit has an extended torsion zone, which makes it extremely durable for long-term work. Modified S2 steel and an optimized heat treatment process provide extra durability for high performance in plant installations or heavy industrial work. The set of Pick and Click screwdriver bits with Impact Control in 36 pieces also includes top keys as well as Impact Control Universal Holder Standard Magnetic and Impact Control Universal Holder Quick Release. These holders provide extra grip on the bit when mounting screws with power tools, while the Quick Release function allows for quick and easy changes. The bit is part of the Bosch Pick and Click system, which allows for customized accessory sets. The click-fitting system makes it easy to change bits and drills to get a custom set tailored to your needs. It has an external hexagonal shaft of 1/4 inch for use with screwdrivers, especially wrenches.
Package of 8 (index)
8 double-ended screwdriver bits

Hamerboor SDS plus met 20 mm diameter, 400 mm werklengte en 450 mm totale lengte voor het boren in steen, metselwerk, graniet, beton en gewapend beton.

Bosch Hammer Drill Bit SDS plus is ontworpen voor SDS plus-boorhamers en biedt een groot bereik en een nauwkeurige boorgatmaat van 20 mm voor veeleisende boorwerkzaamheden in harde minerale materialen.

Boorkopsleutel biedt een 10.0 mm spanbereik en een S14 gereedschapshouder voor compatibele boorkoppen.

Bosch Boorkopsleutel 10 mm is gemaakt door Bosch en is ontworpen voor het vast- en losdraaien van boorkoppen met een S14-houder, met een opgegeven spanbereik van 10.0 mm.

Houtboor met verzinkboor van Bosch voor boormachines, met 5 mm diameter, 45 mm werklengte, 85 mm totale lengte en rechtsdraaiend.

Bosch houtspiraalboor met verzinkboor is ontworpen voor houttoepassingen waaronder zachthout, multiplex/timmerplaat, spaanplaat en akoestische panelen, met een punthoek van 90° en cilindrische schacht in een zwarte en roestvrijstalen afwerking.

Boorhamerboor SDS plus met 15 mm diameter, 100 mm werklengte en 160 mm totale lengte, geschikt voor boren in steen, metselwerk, graniet, beton en gewapend beton.

Boorhamerboor SDS plus biedt een betrouwbare passing voor SDS plus-boorhamers en is gespecificeerd voor gangbare minerale bouwmaterialen, met duidelijke maatgegevens voor nauwkeurige afstemming van gereedschap en boorgat.

• Diameter: 15 mm
• Werklengte: 100 mm
• Totale lengte: 160 mm
• Materialen: steen, metselwerk, graniet, beton, gewapend beton

Steenboor conform ISO 5468, met 6.5 mm diameter, 4.8 mm schachtdiameter, 60 mm werklengte en 100 mm totale lengte.

Steenboor conform ISO 5468 is ontworpen voor het boren in steen- en metselwerkmaterialen, waaronder metselwerk, kalkzandsteen, kunststeen, natuursteen, gewapend beton en fijn steengoed.

Diamant boorstift, voor multifunctioneel, 82 mm, M16

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill head is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill head's efficient U-shape with 2 notches ensures effective dust removal, less friction, reduced heat generation and wear, extending the life of the bit. The drill bit provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling and efficient fastening. The drill head is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package contains 1 piece.

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill head is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill head's efficient U-shape with 2 notches ensures effective dust removal, less friction, reduced heat generation and wear, and extends the life of the bit. The drill head provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling, and efficient fastening. The drill head is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package contains 1 piece.

Boor, voor hout, centreerpuntboor, 6 mm, lengte: 90 mm

Schuurband, voor hout, 3 stuks, korrel: 80, 75 mm x 508 mm

Zaagblad, voor plastic, spaanplaat, multiplex, vezelplaat, zachthout, epoxy, 25 stuks, T-schacht, lengte: 100 mm

Tot wel drie keer sneller dan een standaardschijf
Maximale verwijdering met Bosch Surface Structure
Met X-LOCK is één klik genoeg - het snelste accessoire-vervangingssysteem op de markt. Past ook op haakse slijpers met moer en draad

Polishing disc, for metal, 115 mm, X-LOCK, grit: 80

Boor, voor beton, metselwerk, hamerboor, 6 mm, SDS-plus, lengte: 465 mm

Kopieeradapter

For use with jigsaws featuring fastening systems with T-shanks. The T 101 AIF Clean for Hard Wood jigsaw blade provides clean, straight cuts in wood. Its precision-ground teeth with toothed construction make clean cuts. It is made of BIM (bimetal), and its fully hardened HSS (high-speed steel) tooth list is attached to a high-elastic HCS (carbon-rich steel) construction, making the blade suitable for cutting hard materials such as hard wood and abrasive woodworking materials. In addition, a pointed-tooth design reduces wear. It features fine tooth height (1.7 mm) for cutting thin solid wood materials ranging from 2-30 mm thick.
T 101 AIF
BIM, pointed teeth, precision-ground teeth and toothed
Hardwood, laminate, laminate sheets/HPL (2-30 mm), no splinters