Bosch - pagina 126

The fine wire staples fit staple guns from the following brands: AEG, Arrow, Black+Decker, Bosch, Esco, kwb, Maestri, Mekano, Metabo, Neckermann/Bullcraft Novus Outifrance Piranha Rocagraf Stanley Skil and Wolfcraft. The fine wire staples type 53 are ideal for a multitude of general DIY tasks and professional stapling jobs. They are suitable for a wide range of thin materials such as fabrics paper flat wooden mouldings and wire mesh fencing. In addition the staples are particularly suitable for applications where the staple back should not be pressed into the material. The staples have a narrow back which allows them to penetrate deeply into the material providing good grip with a very discreet staple back

Deuvelzetterset voor Ø 6 mm, gemaakt door Bosch.

Bosch Dowel Setter Set for Ø 6 mm is ontworpen voor gebruik met deuvels met een diameter van 6 mm en wordt vermeld met een 6 mm diameterspecificatie.

Borstel voor boormachines met nylondraad en korundschuurmiddel K80, ontworpen voor werk op ferrometalen en wapeningsstaal.

Bosch Brush for drills – nylon wire with corundum abrasive K80, 25 mm heeft een borstelkop met 25 mm diameter, 1 mm draaddikte en een 6 mm schacht, met een maximale snelheid van 4500 rpm.

Dust extraction
Dust extraction for PMF 190 E, PMF 250 CES and GOP 300
for extracting sanding dust in combination with the sanding plate AVZ 93 G (not Starlock version).
Important! When working with the Starlock sanding plate AVZ 93 G, dust extraction with spare part number 2.609.256.D57 must be used.

Voor Black & Decker, ...

Milling cutter bit, for wood, softwood, hardwood, 15 pieces, cylindrical

Bosch X431 Standard for Metal schuurschijven

Bosch X431 Standard for Metal schuurschijven

Beregnet til Bosch GAS 20 L SFC Professional. Sugregulatoren er et støvsugergreb med sugregulator.
Luftreguleringsgreb

Clean for Metal cup steel brush provides an extra fine surface finish. The cup steel brush is equipped with copper-coated, corrugated wire for light to moderately demanding cleaning tasks. It is suitable for removing coatings and rust and sanding paint on medium to large surfaces in metal and non-ferrous metals. This cup steel brush is also suitable for roughening, matting, and cleaning formwork boards and cladding. The copper-coated wires on the brush provide protection against corrosion. Brush wires are available in different thicknesses depending on how strong the abrasive effect needs to be. Thicker wires are more aggressive and provide a coarser but faster surface finish, while thinner wires provide finer, smoother surface results. It is intended for use with angle grinders with M14 thread.
Cup Steel Brush - Corrugated Wire, Brass Plated
Suitable For Light to moderately demanding cleaning tasks on medium to large surfaces of metal or base metals such as removal of coatings, removal of rusts, cleaning formwork boards & facades , roughening , matting , removing lacquer.
Fits Angle grinders with M 10 or M 14 thread as well as GGS 6 S Professional
Advantage: Corrosion protection thanks to brass-plated wire.

X440 Best for Wood and Paint removes material with impressive speed when sanding old paint, varnish or wood surfaces. The strong abrasive grain of semi-loose aluminum oxide guarantees effective sanding. In addition, the backing material is made of robust X-cloth with a quality belt joint that ensures high strength during demanding work. Furthermore, the grains are provided with an electrostatic, open surface that ensures uniform dust removal and uninterrupted sanding. This product is intended for sanding wood and painted surfaces and is suitable for smoothing out edges. The product is also ideal for planing grooves and edges. The abrasive grain is attached using a fully synthetic resin bond, which ensures exceptional durability in tough tasks. The X440 Best for Wood and Paint sanding belt fits belt sanders.
Package of 3 pieces.

It is compatible with angle grinders. The Standard for Ceramic diamond cutting disc provides reliable cuts in tiles. Its continuous cutting edge delivers precise results in all types of tiles. Furthermore, the quality standards of the disc are ensured by Bosch's diamond competence center in Switzerland. Use this disc for cutting ceramic materials, porcelain and fine stoneware

The Heavy Metal Cup Steel Brush provides an extra coarse surface finish. This cup brush is equipped with braided wire for demanding cleaning tasks. It is ideal for use on metal and suitable for cleaning tasks on medium to large steel surfaces, such as removing heavy rust, undercoating, paint or varnish. The brush wires are available in different thicknesses depending on how strong the abrasive effect needs to be. Thicker wires are more aggressive and provide a coarser but faster surface finish, while thinner wires provide finer, smoother surface results. It is designed for use with angle grinders with M14 thread.
Cup Steel Brush - Twisted Wire
Suitable for demanding cleaning tasks on medium to large metal surfaces such as removing rust or undercoating, removing paint or varnish.
Fits angle grinders with M 10 or M 14 thread as well as GGS 6 S Professional

Doosboor, voor beton, metselwerk, kalksteen, 82 mm, SDS-plus, lengte: 75 mm

Boorstift, voor spaanplaat, zachthout, spaanplaat, speedboor, 8 mm, zeskant, lengte: 152 mm

Extended torsion zone for extreme robustness for long-lasting work
Modified S2 steel and optimised heat treatment process provides extra durability for high performance

Hamerboorset met SDS plus bevat 7 stuks met diameters en lengtes: 5.0x110, 5.5x110, 6.0x110, 6.0x160, 7.0x160, 8.0x160, 10.0x160 mm.

7-delige Hamerboorset SDS plus is ontworpen voor boren in steen, metselwerk, graniet, beton en gewapend beton, met een selectie boormaten voor verschillende boortaken.

Schuurbladenset voor boormachine met 5 stuks, 125 mm diameter en korrel 60, ontworpen voor het schuren van verf, krasvaste lak, plamuur en een reeks houtmaterialen.

Schuurbladenset met 5 stuks voor boormachine is geschikt voor gebruik op coatings zoals verf, krasvaste lak en plamuur, evenals zachthout, spaanplaat, hardhout/massief hout en composietmaterialen.

Boor, voor beton, metselwerk, hamerboor, 12 mm, SDS-plus, lengte: 315 mm

Boor, voor beton, metselwerk, hamerboor, 8 mm, SDS-plus, lengte: 315 mm

The drill bit has a hexagonal shaft system and is compatible with all screwdrivers with a 13 mm chuck. The spiral drill bit is suitable for quick and precise drilling when drilling through holes, pre-drilling for rafter nails, and drilling deep dowel holes in wood. The powerful self-feeding tip pulls the bit all the way through, ensuring fast and precise drilling with low power consumption. The optimized low-friction geometry of the bit with solid core ensures straight holes, high chip removal, and higher working speed. The optimized guide edge of the bit and precision-ground head cutting edge produce precise holes. Suitable for use in construction trades, by carpenters and roofers, it is suitable for both softwood and hardwood
Total length 160 mm

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 5 pieces.

Bitset voor interne Torx (T) schroeven met 10 stuks, inclusief een magnetische universele houder en 25 mm bits met een 1/4" externe zeskantschacht (ISO 1173 C6.3).

Bosch 10-delige schroevendraaierbitset standaard voor interne Torx schroeven (T) bevat bits T10, T15, T20, T25 (2x), T27, T30 en T40 (2x), plus een magnetische universele houder voor stevige bitfixatie en snelle wissels.

Verzinkboor in gereedschapsstaal met 10.0 mm diameter, M5-verzinkspecificatie en 50 mm totale lengte, geschikt voor metalen, kunststoffen en hout.

Bosch verzinkboor, gereedschapsstaal is ontworpen voor schoon verzinken in materialen zoals non-ferrometalen, kunststoffen inclusief Styrofoam, zachthout en hardhout, en ferrometalen inclusief betonstaal.

Bitset met 3 dubbelbladige bits voor Pozidriv-kruiskopschroeven en sleufschroeven (PH, S), 60 mm lengte, met 1/4" uitwendige zeskantschacht.

3-delige dubbelbladige bitset voor Pozidriv-kruiskopschroeven en sleufschroeven (PH, S) bevat S0.6x4.5-PZ1, S0.8x5.5-PZ2 en S1.2x6.5-PZ3 bits, ontworpen voor gebruik met 1/4" uitwendige zeskant-houders.