Schroevendraaier bit, voor roestvrij staal, zachthout, 3 stuks, 1/4", torx, T20, hexagonaal, lengte: 25 mm

Impact hammer drill/driver, 800 W, keyless chuck, 19 N·m

Core cutter, for concrete, masonry, limestone, 90 mm, SDS-max, length: 550 mm

Schuurband, voor hout, 3 stuks, korrel: 60, 60 mm x 400 mm

Saw blade, for sheet metal, solid pipes, 5 pieces, length: 150 mm, width: 19 mm

X440 Best for Wood and Paint removes material with impressive speed when sanding old paint, varnish or wood surfaces. The strong abrasive grain of semi-loose aluminum oxide guarantees effective sanding. In addition, the backing material is made of robust X-cloth with a quality belt joint that ensures high strength during demanding work. Furthermore, the grains are provided with an electrostatic, open surface that ensures uniform dust removal and uninterrupted sanding. This product is intended for sanding wood and painted surfaces and is suitable for smoothing out edges. The product is also ideal for planing grooves and edges. The abrasive grain is attached using a fully synthetic resin bond, which ensures exceptional durability in tough tasks. The X440 Best for Wood and Paint sanding belt fits belt sanders.
Package of 3 pieces.

X440 Best for Wood and Paint removes material with impressive speed when sanding old paint, varnish or wood surfaces. The strong abrasive grain of semi-loose aluminum oxide guarantees effective sanding. In addition, the backing material is made of robust X-cloth with a quality tape joint that ensures high strength during demanding work. Furthermore, the grains are provided with an electrostatic open surface that ensures uniform dust removal and uninterrupted sanding. This product is intended for sanding wood and painted surfaces and is suitable for smoothing out edges. The product is also ideal for planar grinding of grooves and edges. The abrasive grain is attached using a fully synthetic resin bond, which ensures exceptional durability in tough tasks. The X440 Best for Wood and Paint abrasive belt fits belt sanders.
Package of 3 pieces.

Jig zaagbladenset, voor hout, 10 stuks, lengte: 100 mm, 83 mm, 92 mm

Do not use on shaft bushings. The collet clamps the milling cutter. Always use the correct size collet to avoid danger during use.
Collet

Schuurvel, 25 stuks, schijf, korrel: 120, 125 mm

Ratel schroevendraaier met bit set, 38 stuks, in draagtas

Hogesnelheidsfrees, voor zachthout, hardhout, speedboor, plat, 24 mm, zeskant, lengte: 400 mm

Boschfilter for gas 35 hafc ptfe

Tot 2 keer sneller dan standaard schuurpapier - Het schuren van grote oppervlakken kost veel tijd: Veel schuurpapieren raken snel verstopt met stof en verliezen hun abrasiviteit, waardoor het eigenlijke schuurproces meer tijd in beslag neemt. Door scherpe korrels te combineren met speciale technologie die verstopping voorkomt, behoudt Expert C470-schuurpapier zijn speciale eigenschappen. Dit betekent dat u sneller en langer kunt werken zonder concessies te doen aan het resultaat van het schuren. Om het best mogelijke oppervlak voor het schuren te bereiken, omvat onze productiemethode voor agressieve korreluitlijning de oriëntatie van de korrels zodat hun scherpste kant bovenaan staat. Vervolgens bedekken we ze met een sterke binding en een coating om verstopping te voorkomen. Dit, samen met optimale gritdichtheid, zorgt voor maximale snelheid en minimale verstopping. Besteed minder tijd aan het schuren of krijg meer werk gedaan in dezelfde hoeveelheid tijd met Bosch Expert C470 Schuurpapier. Eenvoudige bevestiging met klittenbandsluiting.

Boorstift, voor beton, plastic, staal, zachthout, soft tile, 6.5 mm, zeskant, lengte: 100 mm

Boorstift, voor beton, metselwerk, versterkt beton, 18 mm, SDS-max, lengte: 940 mm

Drill bit, for metal, twist bit, 10 pieces, 2 mm, hex, length: 60 mm

It has a 1/4 in. External hex shank for use with drill drivers, screwdrivers and especially impact screwdrivers. The very robust Impact Control screwdriver bit is even suitable for the high torque of impact screwdrivers. The special torsion zone gives the bit an extremely high durability for continuous use, the S2-modified steel and the optimized heat treatment process enable maximum performance under the harshest conditions. This product is perfectly suitable for heavy tasks such as extensive assembly or heavy industrial work.

The step drill bit head is made of HSS (high-speed steel) and coated with AlTiN (aluminum titanium nitride). This provides the longest possible lifespan and does not require the use of coolant. Laser-marked numbers in both spiral flutes provide highly visible and durable marking of the hole diameter. In addition, the 3-flat shank prevents slipping in the drill chuck and provides efficient transmission with high torque. The HSS step drill bit head delivers smooth, burr-free drilling in multiple diameters with a single drill bit. It is ideal for deburring, drilling round holes, and enlarging existing ones. It is not necessary to mark center points because the two-part tip provides easy starting. Its CNC-ground spiral flute allows for optimized chip removal and less vibration for smooth drilling. The most optimal cutting and absolute smoothness are ensured thanks to axial and radial clearance grinding. This step drill bit is suitable for use on thin materials such as non-ferrous metals, sheet plastic, sheet steel, plastic, and stainless steel.
9 steps Ø 4-5-6-7-8-9-10-11-12 mm

The drill bit for installation work is extremely robust for formwork. The drill bit and shaft end are screwed together, which reduces the risk of breakage and ensures smooth operation. The tool's tapered notch, offset drill head, and shaft end prevent jamming even in damp wood while having enough power to cut through hidden nails. The extra-long shaft makes the drill bit versatile for drilling into multi-layered building materials or sandwich materials, such as within the construction industry (formwork) and for indoor installation work, plumbing work, and electrical installations. The installation drill bit is suitable for formwork, plates, planks, beams, plasterboard sheets lightweight building materials insulation and metal such as metal sheets sandwich materials with steel aluminum or profiled sheets. The installation drill bit is made of HSS (high-speed steel) according to DIN 7490 with a 118-degree angled cutting edge at the top. The cylindrical shaft of the drilling head is compatible with all drills with a 13 mm chuck.
Total length: 600 mm

Bosch 2 609 256 902 boor 1 stuk(s)

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The bit's tapered torsion zone easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 5 pieces.

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the shape of the tip with PointTeQ. It is quick and easy to start drilling, as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm since they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (notched angle) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in drill stands and screwdrivers.
Package of 10 pieces.