Bosch - pagina 129

Zaagblad, voor plastic, spaanplaat, multiplex, vezelplaat, zachthout, epoxy, 25 stuks, T-schacht, lengte: 100 mm

Tot wel drie keer sneller dan een standaardschijf
Maximale verwijdering met Bosch Surface Structure
Met X-LOCK is één klik genoeg - het snelste accessoire-vervangingssysteem op de markt. Past ook op haakse slijpers met moer en draad

Polishing disc, for metal, 115 mm, X-LOCK, grit: 80

Boor, voor beton, metselwerk, hamerboor, 6 mm, SDS-plus, lengte: 465 mm

Kopieeradapter

For use with jigsaws featuring fastening systems with T-shanks. The T 101 AIF Clean for Hard Wood jigsaw blade provides clean, straight cuts in wood. Its precision-ground teeth with toothed construction make clean cuts. It is made of BIM (bimetal), and its fully hardened HSS (high-speed steel) tooth list is attached to a high-elastic HCS (carbon-rich steel) construction, making the blade suitable for cutting hard materials such as hard wood and abrasive woodworking materials. In addition, a pointed-tooth design reduces wear. It features fine tooth height (1.7 mm) for cutting thin solid wood materials ranging from 2-30 mm thick.
T 101 AIF
BIM, pointed teeth, precision-ground teeth and toothed
Hardwood, laminate, laminate sheets/HPL (2-30 mm), no splinters

Boorstift, voor spaanplaat, zachthout, spaanplaat, speedboor, 36 mm, zeskant, lengte: 400 mm

Bosch SDS-Quick multi-purpose drill bits

Fladdyvel GR 0

The Optiline Wood circular saw blade provides precise cuts in all types of wood. The blade's high-quality precision-ground carbide teeth provide clean cuts, while its main blade, made of dimensionally stable SK5 hardened steel (> 40 HRC), ensures accuracy. At the same time, the blade's expansion slots reduce vibration during use, which has a noise-reducing effect and reduces heat development. This saw blade is used in all types of wood and wood materials. Depending on the number of teeth, different results can be achieved with all Optiline Wood circular saw blades that have ATB tooth geometry (Alternate Top Bevel): When the blade is equipped with a high number of teeth, it provides clean cuts, whereas a low number of teeth provides powerful and efficient cuts. It is compatible with handheld miter saws, compound miter saws and table saws.

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering point of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral drill bit is manufactured according to DIN 338. The type N (notch angle) of the borehead has a 135-degree point and a diameter tolerance of h8. It has a cylindrical shaft system (the shaft has the same diameter as the borehead) and is intended for use in drilling stands and screwdrivers.
Package with 10 pieces.

The F460 Best for Wood and Paint ensures exceptional finish when sanding and grinding wood as well as painted surfaces. Its F/E backing pads are extremely durable, allowing for continuous sanding and providing professional results. In addition, the semi-loose quality abrasive grains of aluminum oxide and silicon carbide material remove material with extreme precision, ensuring perfect surface results. The sanding sheet is designed for flat sanding of edges and edge strips, processing of smaller surfaces as well as medium-fine and fine grinding of surfaces, edges, and folds. The sanding sheet is also ideal for roughening up and intermediate grinding of primers, putty filler, and lacquer. The blade is covered with strong semi-loose abrasive grains of aluminum oxide and silicon carbide that ensure uniform surface quality. The abrasive sheet is electrostatically open to remove material with high precision ensuring optimal grinding performance. Additionally the abrasive grain is attached to the F/E backing pads using a fully synthetic resin that ensures high wear resistance for tough tasks while providing long life span.The F460 Best for Wood & Paint Sandpaper fits delta grinders & multi-cutters.
Package contains 5 sheets'

Diamond cutter, voor keramiek, 40 mm, X-LOCK

It is suitable for use with handheld, table-mounted portable milling machines and CNC. The Wood Core Box standard drill ensures optimal cutting when milling rounded notches. It has a high-quality carbide cutting edge that provides durable and reliable cutting results. In addition, the hammer drill prevents kickback by limiting the thickness of the generated chips. This product is intended for milling rounded notches on decorative panels, boards, and building surfaces in soft and hard solid wood and composite wood

It is intended for polishing machines. The grinding disc creates different surface structures in stainless steel.
Flap wheel

Batterijlader + batterij, Li-Ion, 2 Ah, 2 A

Sander; PSS 300 A/AE; Power input: 250 W; Oscillation rate: 14,000 - 24,000 oscillations/min; Square sanding surface: 262 cm² (114 x 230 mm)
Includes:
Sanding paper (Red Wood) P120; Transport case; Bosch microfilter

The all-rounder for precise alignment

Ratel schroevendraaier met bit set, 38 stuks, in draagtas

F355 Best for Coatings and Composites ensures an impressive finish when sanding and grinding abrasive surfaces and composite materials. Blades with silicon carbide abrasive grains ensure precise material removal for professional results. Additionally, the electrostatic, open surface with spaces between the grains ensures uniform dust removal, preventing clogging. The sanding roll is designed for grinding hard materials such as stone and composite materials as well as intermediate sanding during painting work. It is also suitable for sanding and grinding paint, primer, putty, and plastic. Also suitable for precision work on ferrous and non-ferrous materials. F355 Best for Coatings and Composites has a closed antistatic coating to reduce dust adhesion to the workpiece or machine. The abrasive grain is attached using a fully synthetic resin bond that ensures exceptional durability in tough tasks. The product's backing material is F/C paper for optimal sanding properties. The F355 Best for Coatings and Composites abrasive sheet fits all common flat grinders.
Package of 5 pieces.

Schuurrol, voor zachthout, hardhout, korrel: 80, 93 mm x 5 m

Schuurband, voor hout, verf, lak, 3 stuks, korrel: 40, 75 mm x 457 mm

It can be used for glue guns of all brands including Bosch, Black+Decker, Bostik, Bühnen, Metabo, Pattex, Peugeot, Steinel and Uhu. The glue stick creates an elastic but durable joint and glues in a gray color that makes it perfect for use with cable tensioners and electrical work. It is also suitable for PVC and carpets. This glue stick is made of hot melt adhesive and is ideal for use in repair and fastening tasks as well as installation, sealing and caulking work

X440 Best for Wood and Paint removes material with impressive speed when sanding old paint, varnish or wood surfaces. The strong abrasive grain of semi-loose aluminum oxide guarantees effective sanding. In addition, the backing material is made of robust X-cloth with a quality tape joint that ensures high strength during demanding work. Furthermore, the grains are provided with an electrostatic, open surface that ensures uniform dust removal and uninterrupted sanding. This product is intended for sanding wood and painted surfaces and is suitable for smoothing out edges. The product is also ideal for planar grinding of grooves and edges. The abrasive grain is attached using a fully synthetic resin bond, which ensures exceptional durability in tough tasks. The X440 Best for Wood and Paint abrasive belt fits belt sanders.
Package of 10 pieces.

It is compatible with an SDS plus chisel attachment, or it can be used directly in SDS plus rotary hammers with rotation stop. The SDS plus flat chisel can be used for standard chiseling for various demolition and renovation tasks. Good material removal is enabled by the flat cutting edge. The chisel is intended for use in concrete and brick for tasks such as adaptation work, destruction or removal of walls, renovation of joints, and clearing reinforcements.Flat Chisel
SDS plus flat chisel for standard chiseling in connection with various demolition and renovation tasks