Boren en bits - pagina 58

The SDS plus-9 Rebar Cutter drill bit is specially designed for drilling in reinforced concrete. The drill bit's solid carbide teeth have a special shape that ensures optimal drilling speed and durability. The design of the drill bit with 2+2 deep grooves ensures optimal dust removal and long life. Furthermore, the design is vibration-optimized, ensuring optimal power transmission and speed. The drill bit also has a ventilation hole for heat dissipation and removal of metal chips. Drilling in reinforced concrete should always be done in consultation with a building engineer. It is compatible with SDS plus holders on rotary hammers and should be used without impact function.
Package contains 1 piece.

Router bit set, 12 stuks, 8 mm

Boorset voor metselwerk, kalksteen, steen, kunststeen, 7 stuks, lengte: 75 mm, 85 mm, 100 mm, 120 mm en 60 mm

Schroevendraaier- en boorset, voor hout, metaal, beton, 91 stuks

The SDS max-9 Natural Stone drill bit has a long lifespan in natural stone. The drill bit has two main cutting edges and two robust side bolts, which extend the lifespan. The drill bit is made of a high-quality carbide material that ensures long life and great durability. The vibration-optimized design with 2+2 grooves also ensures optimal power transmission during drilling. The drill bit is intended for drilling in natural stone. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, accurate drilling, and efficient fastening. It is compatible with all hammer drills with SDS max holders.
Package of 1 piece.

Drill bit set, 5 pieces, 5 mm, 6 mm, 8 mm, 10 mm, SDS-plus, length: 160 mm, 110 mm, for UniversalHammer 18V

Schroevendraaier- en boorbitset met 14 stuks voor veelzijdig gebruik, met Torx-, Phillips-, Pozidriv- en sleufbits plus boorbits in meerdere diameters en een magnetische bithouder.

Bosch Mini X-Line wordt geleverd in een kunststof koffer en bevat boorbits (3, 4, 5, 6 en 8 mm) en 25 mm schroevendraaierbits in de maten T20, T25, PH1, PH2, PZ1, PZ2, SL4.0 en SL6.0, ontworpen voor Bosch EasyImpact 600 en UniversalImpact 700.

Boorstiftset, voor metaal, 7 stuks

The CYL-3 drill head ensures long-lasting performance when drilling in concrete. The wear-resistant drill head is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill head's efficient U-shape with 2 notches ensures effective dust removal, less friction, reduced heat generation and wear, and extends the life of the bit. The drill head provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling, and efficient fastening. The drill head is compatible with the cylindrical shaft system for all powered and battery-powered hammer drills.
Concrete Drill Set CYL-3 with 5 pieces

Screwdriver and drill bit set, for wood, metal, masonry, 30 pieces, torx, phillips, pozidriv, slot, length: 25 mm

Schroevendraaier, boor en dopsleutelset, voor hout, metaal, metselwerk, verzinkboor, spiraalboor, 34 stuks, torx-, phillips-, pozidriv- en sleufkopbits van 7 mm tot 10 mm lang: 25 mm

Beitel, voor metselwerk, mortel, spade, SDS-max, lengte: 400 mm, breedte: 80 mm

Boor, voor beton, metselwerk, kalksteen, steen, kunststeen, 3 stuks, 6 mm diameter en lengte van 100 mm

Boor, voor hout, slangenboor, 18 mm, zeskantig, lengte: 600 mm

Designed for work with plaster and wood and compatible with the attachment MA 55 for the Bosch screwdriver GSR 6-45 TE. The screw tape has a coarse thread for quick work on plaster walls.
Coarse thread
Suitable for plasterboard on wood

Schroevendraaier bit, 25 stuks, 1/4", torx, T20, hexagonaal, lengte: 25 mm

Routerbit voor hout, afrondfrees, lengte: 53 mm

Screwdriver and drill bit set, for wood, metal, concrete, stone, twist bit, hammer bit, brad point bit, 19 pieces, 5 mm, 6 mm, 8 mm, 4 mm, 3 mm, 2 mm, torx, phillips, pozidriv, SDS-quick, hex

Beitel, schop, SDS-max, lengte: 300 mm, breedte: 80 mm

Beitel, voor beton, metselwerk, punt, 10 stuks, SDS-plus, lengte: 250 mm

The SDS max-7 drill bit is perfect for use at the fastest drilling speeds. The solid S-carbide cutter and angled side cutters provide very fast drilling. The drill head's vibration-optimized notch design provides optimal power transmission and increased speed. The product is suitable for use in concrete and reinforced concrete, limestone, and masonry. The visible wear indicator shows whether the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. It is compatible with SDS max holders on rotary hammers.
Package of 1 piece.

Schroevendraaier- en boorset, voor hout, metaal, beton, 76 stuks

Suitable for use with diamond drilling tools. The Universal Diamond Core Bit standard for dry drilling ensures efficient drilling in masonry. The core bit segments are laser welded to ensure good durability and enable dry drilling in masonry for junction boxes, electrical outlets, sanitary piping, etc. The dry drill core bit is designed for building materials such as limestone, brick and masonry.
Diamond Dry Drill Crown Set G 1/2" with 5 pieces
including:
1 x ejector
1 x adapter hexagon - G 1/2"
1 x adapter SDS plus - G 1/2"
1 x extension hexagon - G 1/2" (240 mm)
1 x extension SDS plus - G 1/2" (240 mm)
1 x centering drill bit 200 mm