Boren en bits - pagina 56

Drill bit, for metal, twist bit, 10 pieces, 2 mm, hex, length: 60 mm

Gatenzaagset met 8 diameters (25, 32, 38, 44, 51, 57, 63, 68 mm) voor zagen in hout en geselecteerde kunststoffen.

Bosch 8-delige gatenzaagset ondersteunt werkzaamheden in zachthout, spaanplaat, constructiehout en gelamineerde platen/sandwichpanelen, evenals kunststoffen zoals PP, PE, isolatiemateriaal en acrylglas (PM).

The SDS plus-5 drill head guarantees trouble-free drilling. The grooved carbide tip with notches ensures smooth drilling and easily penetrates the material without getting stuck, even in concrete. The Activeteq centering tip guides the drill position from the start without shaking or displacement and ensures precise hole diameter. AWB soldering and hardening technology reduces vibration during drilling, so the user is not burdened. The drill is suitable for masonry and concrete. The visible wear indicator shows if the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill head is made in Germany. Compatible with SDS plus holder rotary hammers.
Package of 1 piece.

Boor, voor beton, metselwerk, 4 mm, SDS-plus, lengte: 115 mm

Boor, voor beton, metselwerk, hamerboor, 12 mm, SDS-plus, lengte: 315 mm

Boor, voor metaal, spiraalboor, 10 stuks, 1.5 mm, lengte: 40 mm

It has a cylindrical shaft system (the shaft has the same diameter as the drill head) and is intended for use in drilling stands and screwdrivers. The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree two-part self-centering tip of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the two-part tip, it is also unnecessary to mark center points in advance or pilot bore up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral drill bit is manufactured according to DIN 338. The type N (notch angle) of the drill head has a 135-degree tip and a diameter tolerance of h8.
Metal Drill Set HSS-G with five parts, point angle 135° ,1/4" hexagonal shank

Drill bit, twist bit, 24 mm, SDS-plus, length: 600 mm

Boorstift, voor beton, steen, hamerboor, 6 mm, SDS-plus, lengte: 215 mm, voor XGT HR008GM202

Drill bit, for wood, nail driver bit, 13 mm, SDS-plus, length: 58 mm

Beitelset, plat, punt, spade, 3 stuks, SDS-plus

Boorstift, voor spaanplaat, zachthout, spaanplaat, speedboor, 18 mm, zeskant, lengte: 400 mm

Gatenzaag, voor plastic, bakstenen, soft tile, stainless steel sheets, wood with metal, 68 mm

Corner brush, voor metaal, plastic, tegel, graniet, weefsel, 10 stuks, 40 mm, lengte: 50 mm, breedte: 40 mm, voor Versa PC10-1/10

The drill bit has a hexagonal shaft system and is compatible with all screwdrivers with a 13 mm chuck. The spiral drill bit is suitable for quick and precise drilling when drilling through holes, pre-drilling for rafter nails, and drilling deep dowel holes in wood. The powerful self-feeding tip pulls the bit all the way through, ensuring fast and precise drilling with low power consumption. The optimized low-friction geometry of the bit with solid core ensures straight holes, high chip removal, and higher working speed. The optimized guide edge of the bit and precision-ground head cutting edge produce precise holes. Suitable for use in construction trades, by carpenters and roofers, it is suitable for both softwood and hardwood
Total length 600 mm

Boor, voor plastic, spaanplaat, massief hout, Corian, medium-density fibreboard (MDF), 20 mm, recht, lengte: 56 mm

Diamantboorset, voor beton, 5 stuks, 5 mm, 6 mm, 8 mm, 4 mm, lengte: 100 mm, 90 mm

Mandrel, 7.15 mm, length: 85 mm

Bit-adapter, 11 mm, zeskant

The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly, so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers.
Package with one piece.

Boor, voor beton, metselwerk, hamerboor, 16 mm, SDS-plus, lengte: 315 mm