Boren en bits - pagina 60

Drill bit, twist bit, 24 mm, SDS-plus, length: 600 mm

It has a cylindrical shaft system (the shaft has the same diameter as the drill head) and is intended for use in drilling stands and screwdrivers. The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree two-part self-centering tip of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the two-part tip, it is also unnecessary to mark center points in advance or pilot bore up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral drill bit is manufactured according to DIN 338. The type N (notch angle) of the drill head has a 135-degree tip and a diameter tolerance of h8.
Metal Drill Set HSS-G with five parts, point angle 135° ,1/4" hexagonal shank

Bosch Bit extra-hard

25 mm schroevendraaierbit, 2xPZ2

3 x Bosch professional screwdriver bit PZ insert bit – PZ1, PZ2, PZ3, length 25 mm, hex shank

Bosch HSS spiraalboren geslepen

Bosch HSS Spiraalboor PointTeQ

It has a 1/4 in. External hex shank for use with drill drivers, screwdrivers and especially impact screwdrivers. The very robust Impact Control screwdriver bit is even suitable for the high torque of impact screwdrivers. The special torsion zone gives the bit an extremely high durability for continuous use, the S2-modified steel and the optimized heat treatment process enable maximum performance under the harshest conditions. This product is perfectly suitable for heavy tasks such as extensive assembly or heavy industrial work.

Graveerfrees, 2 stuks, 6.4 mm, lengte: 38 mm

Doorslijpschijf, voor metselwerk, steen, bakstenen, gipsplaat, gipsplaat, 2 stuks, 20 mm, lengte: 77 mm, breedte: 77 mm, voor Dremel DSM20-3/4

The impact control screwdriver bit is very robust and can withstand even the high power of impact screwdrivers

Boschfilter for gas 35 hafc ptfe

Bosch Bit extra-hard

Boorstift, voor beton, versterkt beton, graniet, gehard beton, gneis, hamerboor, 25 mm, SDS-plus, lengte: 450 mm

The drill bit has a hexagonal shaft system and is compatible with all screwdrivers with a 13 mm chuck. The spiral drill bit is suitable for quick and precise drilling when drilling through holes, pre-drilling for rafter nails, and drilling deep dowel holes in wood. The powerful self-feeding tip pulls the bit all the way through, ensuring fast and precise drilling with low power consumption. The optimized low-friction geometry of the bit with solid core ensures straight holes, high chip removal, and higher working speed. The optimized guide edge of the bit and precision-ground head cutting edge produce precise holes. Suitable for use in construction trades, by carpenters and roofers, it is suitable for both softwood and hardwood
Total length 600 mm

Gatenzaag, voor bakstenen, spaanplaat, zachthout, plastic verstevigd met glasvezel, soft tile, 70 mm

Boorstift, voor beton, versterkt beton, graniet, gehard beton, gneis, hamerboor, 6.5 mm, SDS-plus, lengte: 165 mm (pak van 10)

Boorstift, voor beton, versterkt beton, graniet, gehard beton, gneis, hamerboor, 28 mm, SDS-plus, lengte: 450 mm

It is compatible with all rotary hammers with SDS max holders. The SDS max-4 drill head has a head with four cutters, which guarantees long life in concrete. The special design with four cutters ensures a long service life without jamming when drilling into reinforced concrete. The U-shaped design with 2 notches extends the life and ensures effective dust removal. The drill head's wear-resistant carbide material reduces wear during drilling, further extending its lifespan. The drill bit is intended for use on concrete and masonry.
Package of 1 piece.

Boorstift, voor graniet, gehard beton, gneis, gehard verstevigd beton, hamerboor, 18 mm, SDS-plus, lengte: 600 mm

Boorstift, voor beton, metselwerk, versterkt beton, 18 mm, SDS-max, lengte: 940 mm

Routerbit, voor zachthout, hardhout, afronding, 36.7 mm, lengte: 70 mm