Boren en bits - pagina 59

Suitable for use with diamond drilling tools. The Universal Diamond Core Bit standard for dry drilling ensures efficient drilling in masonry. The core bit segments are laser welded to ensure good durability and enable dry drilling in masonry for junction boxes, electrical outlets, sanitary piping, etc. The dry drill core bit is designed for building materials such as limestone, brick and masonry.
Diamond Dry Drill Crown Set G 1/2" with 5 pieces
including:
1 x ejector
1 x adapter hexagon - G 1/2"
1 x adapter SDS plus - G 1/2"
1 x extension hexagon - G 1/2" (240 mm)
1 x extension SDS plus - G 1/2" (240 mm)
1 x centering drill bit 200 mm

Beitel, voor metselwerk, mortel, spade, SDS-max, lengte: 400 mm, breedte: 115 mm

Schroefbitset, 14 stuks, torx, phillips, pozidriv, slot, lengte: 25 mm

Schroevendraaier bit, 25 stuks, 1/4", torx, T20, hexagonaal, lengte: 25 mm

Routerbit voor hout, afrondfrees, lengte: 53 mm

Boorset voor metaal, spiraalboor, 13 stuks

Beitel, schop, SDS-max, lengte: 300 mm, breedte: 80 mm

Beitel, voor beton, metselwerk, punt, 10 stuks, SDS-plus, lengte: 250 mm

The SDS max-7 drill bit is perfect for use at the fastest drilling speeds. The solid S-carbide cutter and angled side cutters provide very fast drilling. The drill head's vibration-optimized notch design provides optimal power transmission and increased speed. The product is suitable for use in concrete and reinforced concrete, limestone, and masonry. The visible wear indicator shows whether the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. It is compatible with SDS max holders on rotary hammers.
Package of 1 piece.

Schroevendraaier- en boorset, voor hout, metaal, beton, 91 stuks

The SDS max-9 Natural Stone drill bit has a long lifespan in natural stone. The drill bit has two main cutting edges and two robust side bolts, which extend the lifespan. The drill bit is made of a high-quality carbide material that ensures long life and great durability. The vibration-optimized design with 2+2 grooves also ensures optimal power transmission during drilling. The drill bit is intended for drilling in natural stone. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, accurate drilling, and efficient fastening. It is compatible with all hammer drills with SDS max holders.
Package of 1 piece.

The SDS plus-9 Rebar Cutter drill bit is specially designed for drilling in reinforced concrete. The drill bit's solid carbide teeth have a special shape that ensures optimal drilling speed and durability. The design of the drill bit with 2+2 deep grooves ensures optimal dust removal and long life. Furthermore, the design is vibration-optimized, ensuring optimal power transmission and speed. The drill bit also has a ventilation hole for heat dissipation and removal of metal chips. Drilling in reinforced concrete should always be done in consultation with a building engineer. It is compatible with SDS plus holders on rotary hammers and should be used without impact function.
Package contains 1 piece.

Boorset voor metselwerk, kalksteen, steen, kunststeen, 7 stuks, lengte: 75 mm, 85 mm, 100 mm, 120 mm en 60 mm

The SDS plus-5 drill head guarantees trouble-free drilling. The grooved carbide tip with notches ensures smooth drilling and easily penetrates the material without getting stuck, even in concrete. The Activeteq centering tip guides the drill position from the start without shaking or displacement and ensures precise hole diameter. AWB soldering and hardening technology reduces vibration during drilling, so the user is not burdened. The drill is suitable for masonry and concrete. The visible wear indicator shows if the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill head is made in Germany. Compatible with SDS plus holder rotary hammers.
Package of 1 piece.

The SDS plus-5 drill bit ensures problem-free drilling. The grooved carbide tip with notches ensures smooth drilling and easily penetrates the material without getting stuck, even in concrete. The Activeteq centering tip guides the drill position from the start without shaking or displacement and ensures precise hole diameter. AWB soldering and hardening technology reduces vibration during drilling, so the user is not burdened. The drill bit is suitable for masonry and concrete. The visible wear indicator shows if the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill head is made in Germany. Compatible with SDS plus holder rotary hammers.
Package of 1 piece.

Hardmetalen gatenzaag met een diameter van 67 mm, ontworpen voor boren in steen- en metselwerkmaterialen, waaronder keramiek, tegels, dakpannen, marmer, vloertegels en klinker.

Hardmetalen gatenzaag levert een nauwkeurige snede van 67 mm in een breed scala aan harde oppervlakken, en is geschikt voor werkzaamheden in steen- en tegelinstallaties waarbij schone ronde openingen nodig zijn.

Boor, spiraalboor, 2 stuks, 3.5 mm, cilindrisch, lengte: 70 mm

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering tip of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral bore head is manufactured according to DIN 338. The bore head is of type N (notch angle) with a 135-degree tip and a diameter tolerance of h8. It has a cylindrical shaft system (the shaft has the same diameter as the bore head) and is intended for use in drilling stands and screwdrivers.
Package with one piece.

Boor, voor beton, metselwerk, hamerboor, 12 mm, SDS-plus, lengte: 615 mm

The CYL-9 Ceramic tile drill head is a standard drill head for drilling in tiles. The practical drill head is suitable for dry drilling without cooling. The simple design without notches is particularly suitable for drilling in soft to medium-hard tiles. Drilling without impact function at low speeds. The drill head is compatible with power and battery-powered drills with a cylindrical shaft system.
Package of 1 piece.

Boor, voor tegels, keramiek, 5 mm, lengte: 70 mm