Boren en bits - pagina 54

The self-tightening drill chuck is intended for Bosch hammer drills. The self-tightening drill chuck is a Bosch system drill chuck with a clamping capacity of Ø 1.5 to 13 mm. It easily tightens the drill and does not require a key. The self-tightening drill chuck is intended for Bosch hammer drills. Self-tightening drill chuck, chrome-plated

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and power drills. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The tapered torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw installation, making it suitable for all tasks. Drive unit ISO 1173 C6.3, 1/4" external hexagon

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The tapered torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks. Drive unit ISO 1173 C6.3, 1/4" external hexagon

Boor, voor zacht hout, hardhout, brad point boor, 20 mm, cilindrisch, lengte: 200 mm

The step drill bit is made of HSS (high-speed steel) and provides a long lifespan when used with coolant. Laser-marked numbers on both flutes provide highly visible and durable marking of the hole diameter. Additionally, the 3-flat shank prevents slipping in the drill chuck and provides efficient transmission with high torque. The HSS step drill head delivers smooth, burr-free drilling in multiple diameters with a single bit. It is ideal for deburring, drilling round holes, and enlarging existing ones. No center punch is needed because the split point allows for easy starting. Its CNC-ground flute enables optimized chip removal and less vibration for smooth drilling. The most optimal cutting edge and absolute smoothness are ensured thanks to axial and radial relief grinding. This step drill bit is suitable for use on thin materials such as non-ferrous metals, sheet plastic, sheet steel, plastic, and stainless steel.
9 steps Ø 4-5-6-7-8-9-10-11-12 mm

The flat drill is made of hardened steel with a centering point for precise drilling. The adjustable flat drill ensures high flexibility when drilling. The flat drill has a wedge-shaped blade with a screw for locking and feeding, which can be adjusted from 15-45 mm. The flat drill is ideally suited for general drilling tasks where larger holes of different diameters are required. The drill is suitable for medium-hard and soft wood as well as lighter building materials and wood panels.
Adjustable flat milling cutter, Ø 15 - 25 mm, Ø 25 - 45 mm

The drill bit is equipped with a cylindrical shaft system. The machine-driven drill bit enables precise drilling results in soft and hard wood, especially for deep dowel holes. Split-free holes, for example in timber, are drilled using the finely ground drill head tip with two guide edges. The centering point makes it possible to place the hole precisely and thus achieve precise results. The special groove ensures efficient removal of chips and prevents jamming while achieving an accurate hole diameter. The drill bit can be used for soft and hard wood.
Total length 400 mm

The step drill bit head is made of HSS (high-speed steel) and coated with AlTiN (aluminum titanium nitride). This provides the longest possible lifespan and does not require the use of coolant. Laser-marked numbers in both spiral flutes provide highly visible and durable marking of the hole diameter. In addition, the 3-flat shank prevents slipping in the drill chuck and provides efficient transmission with high torque. The HSS step drill bit head delivers smooth, burr-free drilling in multiple diameters with a single drill bit. It is ideal for deburring, drilling round holes, and enlarging existing ones. It is not necessary to mark center points because the two-part tip provides easy starting. Its CNC-ground spiral flute allows for optimized chip removal and less vibration for smooth drilling. The most optimal cutting and absolute smoothness are ensured thanks to axial and radial clearance grinding. This step drill bit is suitable for use on thin materials such as non-ferrous metals, sheet plastic, sheet steel, plastic, and stainless steel.
9 steps Ø 4-5-6-7-8-9-10-11-12 mm

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 5 pieces.

Boor, spiraalboor, 3 mm, cilindrisch, lengte: 61 mm (pak van 10)

Drill bit, taper bit, 22 mm, cylindrical, length: 600 mm

The drill bit for installation work is extremely robust for formwork. The drill bit and shaft end are screwed together, which reduces the risk of breakage and ensures smooth operation. The tool's tapered notch, offset drill head, and shaft end prevent jamming even in damp wood while having enough power to cut through hidden nails. The extra-long shaft makes the drill bit versatile for drilling into multi-layered building materials or sandwich materials, such as within the construction industry (formwork) and for indoor installation work, plumbing work, and electrical installations. The installation drill bit is suitable for formwork, plates, planks, beams, plasterboard sheets lightweight building materials insulation and metal such as metal sheets sandwich materials with steel aluminum or profiled sheets. The installation drill bit is made of HSS (high-speed steel) according to DIN 7490 with a 118-degree angled cutting edge at the top. The cylindrical shaft of the drilling head is compatible with all drills with a 13 mm chuck.
Total length: 600 mm

The SDS plus-5 drill bit ensures problem-free drilling. The grooved carbide tip with notches ensures smooth drilling and easily penetrates the material without getting stuck, even in concrete. The Activeteq centering tip guides the drill position from the start without shaking or displacement and ensures precise hole diameter. AWB soldering and hardening technology reduces vibration during drilling, so the user is not burdened. The drill bit is suitable for masonry and concrete. The visible wear indicator shows if the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill head is made in Germany. Compatible with SDS plus holder rotary hammers.
Package of 1 piece.

The drill bit has a hexagonal shaft system and is compatible with all screwdrivers with a 13 mm chuck. The spiral drill bit is suitable for quick and precise drilling when drilling through holes, pre-drilling for rafter nails, and drilling deep dowel holes in wood. The powerful self-feeding tip pulls the bit all the way through, ensuring fast and precise drilling with low power consumption. The optimized low-friction geometry of the bit with solid core ensures straight holes, high chip removal, and higher working speed. The optimized guide edge of the bit and precision-ground head cutting edge produce precise holes. Suitable for use in construction trades, by carpenters and roofers, it is suitable for both softwood and hardwood
Total length 160 mm

Boor, spiraalboor, 10 mm, cilindrisch, lengte: 600 mm

Stanley Schroefadapter PH2

The Standard for Wood groove cutter ensures optimal cutting when milling rounded grooves in narrow edges. It has a high-quality hard metal blade that provides durable and reliable cutting results. In addition, the hammer drill prevents kickback by limiting the thickness of the generated chips. It is designed for work in soft and hard solid wood as well as composite wood. The Standard for Wood groove cutter is suitable for making placement joints in narrow edges, such as tongue and groove joints. The ball bearing makes it easy to control the tool directly on the workpiece without shielding. It is suitable for use with handheld routers and table-mounted portable routers.

Boor, voor beton, metselwerk, 10 stuks, 8 mm, SDS-plus, lengte: 265 mm

Boor, voor beton, metselwerk, hamerboor, 8 mm, SDS-plus, lengte: 315 mm

Beitelset, voor beton, metselwerk, graniet, platte beitel, puntbeitel en spadebeitel. 3 stuks SDS-plus met een lengte van 250 mm

Boor, voor beton, metselwerk, hamerboor, 10 mm, SDS-plus, lengte: 315 mm

Boor, voor metaal, spiraalboor, 10 mm, cilindrisch, lengte: 133 mm