Boren en bits - pagina 10

Schroefbit, 3 stuks, torx, T25, zeskant, lengte: 50 mm

Boorstift, voor hout, triplex, laminaat, zachthout, hardhout, speedboor, 16 mm, zeskant, lengte: 150 mm

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 5 pieces.

Boor, voor zacht hout, hardhout, centreerpuntboor, 6 mm, cilindrisch, lengte: 93 mm

Boschdiamond cup disc beton life 115x22.2mm

DeWALT DT90324-QZ gatenzaag 1 stuk(s)

Makita Draadeinddopsleutels

Boorstift, voor hout, zachthout, hardhout, composietmaterialen, speedboor, 24 mm, zeskant, lengte: 150 mm

The keyless chuck is very easy to use and ensures convenient operation. Easy and quick attachment with one hand without the use of a key and secure operation with cylindrical or hexagonal shank drills. Chucks with 1 sleeve are available with different holders (1/2" - 20 and 3/8" - 24) and are compatible with most common spindle lock drills. See the technical information for more information on impact resistance or suitability for counterclockwise rotation

Hogesnelheidsfrees, 2 stuks, 3.2 mm, lengte: 39 mm

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Package contains one piece.

Impact screwdriver bit, 2 stuks, pozidriv, PZ1, zeskant, lengte: 50 mm, voor Makita DTD172Z

Makita metal drill 19-pieces set, robust plastic case contains precision-ground HSS-GS metal drill bits with round shank in various diameters.

Boorstiftset, voor metaal, spiraalboor, 6 stuks, 5 mm, 6 mm, 8 mm, 4 mm, 3 mm, 2 mm, cilindrisch

Boorstift, voor massief hout, zachthout, hardhout, glued wood, end grain wood, avegaarbit, 5 stuks, 6 mm, 8 mm, 13 mm, 16 mm, 19 mm, zeskant, lengte: 200 mm

Screwdriver and drill bit set, for wood, metal, masonry, countersink, twist bit, spade bit, 40 pieces, torx, phillips, pozidriv, hex, slot, length: 25 mm

Flat chisels can be used for standard chiseling for various demolition tasks in concrete and bricks. The flat cutting edge of the chisel enables good material removal for lighter tasks. The chisel is intended for grooving, demolition, adaptation work as well as renovation of joints and clearing reinforcements.
Flat chisel, which can be used for standard chiseling for various demolition tasks in concrete and bricks

Boorstift, voor beton, versterkt beton, graniet, gehard beton, gneis, 30 stuks, 10 mm, SDS-plus, lengte: 265 mm

Boorstiftset, voor metaal, roestvrij staal, 6 stuks, 5 mm, 6 mm, 8 mm, 4 mm, 3 mm, 2 mm, recht

Boorstift, hamerboor, 10 mm, SDS-plus, lengte: 465 mm

It is suitable for use with handheld, table-mounted portable milling machines and CNC. The Wood Straight-bore head standard ensures optimal cutting for common milling tasks. Durability and reliable cutting results are achieved thanks to high-quality tungsten carbide cutters. In addition, the bore head prevents kickback by limiting the thickness of the generated chips. It is intended for milling grooves, joints, notches and feather joints in soft and hard solid wood as well as composite wood

Schroevendraaier, boorbit en dopsleutelset, 43 stuks, torx, phillips, pozidriv, sleufschroefdraad, 7 mm, 8 mm, 10 mm en 13 mm

Flat chisels can be used for standard chiseling for various demolition tasks in concrete and bricks. The flat cutting edge of the chisel enables good material removal for lighter tasks. The chisel is intended for grooving, demolition, adaptation work as well as renovation of joints and clearing reinforcements.
Flat chisel, which can be used for standard chiseling for various demolition tasks in concrete and bricks

Intended for planers. The adapter is an accessory for connecting the vacuum cleaner hose to the power tool.
Adapter for hand planer

DeWALT DT90361-QZ gatenzaag Boor 9 stuk(s)