Boren en bits - pagina 11

DeWALT DT70717-QZ schroevendraaierbit

26mm diameter flat milling cutter with a working length of 112mm

Impact Premier 28 Piece Torsion Bit Set with clear lids on both sides of the case, allowing contents to be easily seen. Ideal for use with an impact driver. The colour coded bits are complete with a rust-resistant coating.

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The tapered torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks. Screwdriver bit set extra hard (Torx®) with 3 pieces

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill bit is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill bit's efficient U-shape with 2 flutes ensures effective dust removal, less friction, reduced heat development and wear, and extends the life of the drill bit. The drill bit provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill bit is PGM-certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill bit is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Robust Line Concrete Drill Bit Set CYL-3 with 5 pieces

The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly, so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers.
Package with one piece.

Impact Socket, 18mm, 1/2" Square

Boor, spiraalboor, 13 mm, cilindrisch, lengte: 151 mm

Schroevendraaier met bitset

Screwdriver and drill bit set, for wood, metal, masonry, 30 pieces, torx, phillips, pozidriv, slot, length: 25 mm

Boorset, spiraalboor, 10 stuks

Set with bit holder, 21 pcs. 25 mm impact bits and 6 magnetic bits
25 mm bits: Straight: 5.5 mm: 1 pc. 6.5 mm: 1 pc.
Phillips: PH1: 1 pc. PH2: 5 pcs.
Pozidrive: PZ1: ​​1 pc. PZ2 :3 pcs.PZ3 :1pc.
Torx:T15 :1pc.T20 :1pc.T25 :3pcs.T30 :​​​​​ ​​​ ​ ​ ​ ​​​ ​​​​​ ​​                                                         T40：１pcs
Magnetic bit holder：１pcs
Magnetic bits：PH2, PH3, PZ2, TX20,TX25,square #2

Suitable for the most extreme working conditions
Suitable for work above head height due to improved grip
At the same time, the risk of your bits slipping off the screw's groove is reduced

Tough-absorbing bits for universal use. BiTorsion bits with an elastic torsion zone – where kinetic energy is diverted from peak loads – and softer BiTorsion zone to prevent the bit tip from twisting under high strain. This greatly extends the product service life. Offer the best possible service life with the appropriate holder. Comes with Rapidaptor technology, which allows bits to be attached without any need to actuate the sleeve. The removal of the bit is simple, just by pushing the sleeve forward – for rapid bit change with just one hand. For the take-up of bits with 1/4" hexagon head drive as per DIN ISO 1173-C 6.3 und E 6.3. For insertion in the power screwdriver or into the chuck of the power drill. The multi-component Bit-Check is convincing on account of its low weight and the maximum possible degree of compactness. In this respect, the soft material in the lower section of the Bit-Check ensures that the bits are securely held whilst being simple to remove at the same time. The profile and size of the bits are easy to recognise thanks to the Wera "Take it easy" Tool Finder with its colour coding and clearly visible imprint.

Boor, voor beton, metselwerk, hamerboor, 6 mm, SDS-plus, lengte: 465 mm

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering tip of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral drill bit is manufactured according to DIN 338. The type N (notch angle) of the borehead has a 135-degree tip and a diameter tolerance of h8. It has a cylindrical shaft system (the shaft has the same diameter as the borehead) and is intended for use in drilling stands and screwdrivers.
Package with 10 pieces.

Boor, voor metaal, spiraalboor, 12 mm, lengte: 151 mm

Hamerboorset met SDS plus bevat 7 stuks met diameters en lengtes: 5.0x110, 5.5x110, 6.0x110, 6.0x160, 7.0x160, 8.0x160, 10.0x160 mm.

7-delige Hamerboorset SDS plus is ontworpen voor boren in steen, metselwerk, graniet, beton en gewapend beton, met een selectie boormaten voor verschillende boortaken.

The double-ended screwdriver bit is very robust and suitable for demanding tasks, and can even withstand the high impact of wrenches. The bit has an extended torsion zone, which makes it extremely durable for long-term work. Modified S2 steel and an optimized heat treatment process provide extra durability for high performance in plant installations or heavy industrial work. The set of Pick and Click screwdriver bits with Impact Control in 36 pieces also includes top keys as well as Impact Control Universal Holder Standard Magnetic and Impact Control Universal Holder Quick Release. These holders provide extra grip on the bit when mounting screws with power tools, while the Quick Release function allows for quick and easy changes. The bit is part of the Bosch Pick and Click system, which allows for customized accessory sets. The click-fitting system makes it easy to change bits and drills to get a custom set tailored to your needs. It has an external hexagonal shaft of 1/4 inch for use with screwdrivers, especially wrenches.
Package of 8 (index)
8 double-ended screwdriver bits

Schroefbitset, 14 stuks, torx, phillips, pozidriv, slot, lengte: 25 mm

Boorstift, voor spaanplaat, zachthout, spaanplaat, speedboor, 40 mm, zeskant, lengte: 400 mm

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill bit is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill bit's efficient U-shape with 2 flutes ensures effective dust removal, less friction, reduced heat development and wear, and extends the life of the drill bit. The drill bit provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill bit is PGM-certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling, and efficient fastening. The drill bit is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
CYL-3 Concrete Drill Bit Set with 3 pieces

Boorstiftset, voor metaal, roestvrij staal, gehard staal, gietijzer, 19 stuks

Boorstift, voor spaanplaat, zachthout, spaanplaat, speedboor, 18 mm, zeskant, lengte: 400 mm

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill head is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill head's efficient U-shape with 2 notches ensures effective dust removal, less friction, reduced heat generation and wear, extending the life of the bit. The drill bit provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling and efficient fastening. The drill head is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package contains 1 piece.

The CYL-3 drill head ensures long-lasting performance when drilling in concrete. The wear-resistant drill head is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill head's efficient U-shape with 2 notches ensures effective dust removal, less friction, reduced heat generation and wear, and extends the life of the bit. The drill head provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling, and efficient fastening. The drill head is compatible with the cylindrical shaft system for all powered and battery-powered hammer drills.
Concrete Drill Set CYL-3 with 5 pieces