Boren en bits - pagina 12

Boorstift, voor spaanplaat, zachthout, spaanplaat, speedboor, 40 mm, zeskant, lengte: 400 mm

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill bit is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill bit's efficient U-shape with 2 flutes ensures effective dust removal, less friction, reduced heat development and wear, and extends the life of the drill bit. The drill bit provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill bit is PGM-certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling, and efficient fastening. The drill bit is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
CYL-3 Concrete Drill Bit Set with 3 pieces

Boorstiftset, voor metaal, roestvrij staal, gehard staal, gietijzer, 19 stuks

Boorstift, voor spaanplaat, zachthout, spaanplaat, speedboor, 18 mm, zeskant, lengte: 400 mm

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill head is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill head's efficient U-shape with 2 notches ensures effective dust removal, less friction, reduced heat generation and wear, extending the life of the bit. The drill bit provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling and efficient fastening. The drill head is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package contains 1 piece.

Boorstift, hamerboor, 10 mm, SDS-plus, lengte: 165 mm

The CYL-3 drill head ensures long-lasting performance when drilling in concrete. The wear-resistant drill head is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill head's efficient U-shape with 2 notches ensures effective dust removal, less friction, reduced heat generation and wear, and extends the life of the bit. The drill head provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling, and efficient fastening. The drill head is compatible with the cylindrical shaft system for all powered and battery-powered hammer drills.
Concrete Drill Set CYL-3 with 5 pieces

Bosch SDS-Quick multi-purpose drill bits

The CYL-5 drill bit head guarantees extra long lifespan when drilling in concrete and stone. The carbide material developed by Bosch combined with diamond-ground cutting edges provides an extremely durable drill bit head. The variable design with 2 grooves and a short, variable slope significantly reduces groove friction and ensures effective dust removal and less wear. The Bosch Power Grip shaft system enables 100% power transmission from the machine to the drill bit head, so that the power is optimally utilized directly for the drilling task, and reduced power loss means less wear. For drilling fixing holes in concrete, natural stone, and artificial stone materials. The drill bit head is PGM certified by the PGM Masonry Drill Bit Association Board guaranteeing tight tolerances, accurate boreholes, and efficient fastening. The drill bit head is compatible with cylindrical shaft systems for all powered and battery-powered hammer drills.
CYL-5 Concrete Drill Bit Set with 3 pieces

Boorstift, voor hout, spaanplaat, zachthout, spaanplaat, 25 mm, lengte: 400 mm

Boorstift, voor beton, versterkt beton, hamerboor, 28 mm, SDS-max, lengte: 920 mm

It is compatible with a 30 mm hexagonal shaft system for hammer drills. The spade chisel can be used for standard chiseling for various demolition tasks in concrete and bricks. The chisel has a wide cutting edge and provides high material removal rates in masonry and mortar while also being designed for adaptation work in asphalt, masonry, and concrete.
Spade chisel, which can be used for standard chiseling for various demolition tasks in concrete and bricks

Bit voor inbusschroeven met Hex-Plus ontwerp, taai-ductiele constructie en een 5/16" zeskantaandrijving voor universeel gebruik.

Wera 840/2 Z Bit Hex-Plus 8.0 x 100 mm is gemaakt voor binnenzeskantschroeven en biedt een groter contactoppervlak om het inkepings-effect te verminderen en schade aan de schroefkop te helpen voorkomen bij werkzaamheden in harde materialen.

• Hex-Plus profiel voor beter contact in de schroefkop
• Ductiel en taai bitontwerp voor harde materialen
• 5/16" zeskantaandrijving (Wera verbindingsserie 2)
• Geschikt voor houders volgens DIN ISO 1173-D 8
• Geschikt voor Bosch, Fein, Holz-Her, Lecreux, Metabo

Betrouwbare passing en minder slijtage van de schroefkop zorgen voor soepel en consistent bevestigingswerk.

For drilling into concrete, masonry, natural and artificial stone, brick, etc. Rotary/percussion masonry carbide tip drill bit

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering point of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral drill bit is manufactured according to DIN 338. The type N (notch angle) of the borehead has a 135-degree point and a diameter tolerance of h8. It has a cylindrical shaft system (the shaft has the same diameter as the borehead) and is intended for use in drilling stands and screwdrivers.
Package with 10 pieces.

Borenset bevat 9 stuks voor metaal (HSS-R), steen en hout in de maten 4.0, 6.0 en 8.0 mm.

Bosch Drill Bit Set, 9 pieces: Metal HSS-R/stone/wood dekt een breed scala aan materialen, waaronder staal/ferrometalen, betonstaal, metselwerk, fijn steengoed, hout en akoestische panelen, met boorlengtes afgestemd op elk materiaal.

The SDS plus-5 drill head guarantees trouble-free drilling. The grooved carbide tip with notches ensures smooth drilling and easily penetrates the material without getting stuck, even in concrete. The Activeteq centering tip guides the drill position from the start without shaking or displacement and ensures precise hole diameter. AWB soldering and hardening technology reduces vibration during drilling, so the user is not burdened. The drill is suitable for masonry and concrete. The visible wear indicator shows if the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill head is made in Germany. Compatible with SDS plus holder rotary hammers.
Package of 1 piece.

Boorstift, voor spaanplaat, zachthout, spaanplaat, speedboor, 20 mm, zeskant, lengte: 152 mm

Boorstift, voor beton, versterkt beton, hamerboor, 24 mm, SDS-plus, lengte: 520 mm (pak van 5)

Makita D-71956 boor

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Package contains 2 pieces.

Router bit set, 15 stuks, 8 mm

Routerbit, voor hout, Romeinse Ogee, 42.9 mm, lengte: 60 mm, breedte: 15.1 mm

Boorstift, voor beton, versterkt beton, graniet, gehard beton, gneis, hamerboor, 5.5 mm, SDS-plus, lengte: 115 mm

Gatenzaag, voor bakstenen, spaanplaat, zachthout, plastic verstevigd met glasvezel, soft tile, 114 mm