Boren en bits - pagina 8

Boorstift, voor beton, versterkt beton, graniet, gehard beton, gneis, hamerboor, 6 mm, SDS-plus, lengte: 115 mm (pak van 10)

The box is part of the Bosch Pick and Click system, which enables customized accessory sets. The click-fitting system makes it easy to change bits and drills, thus creating an individually tailored set. Empty Case M is a storage box for individually tailored accessory sets. The box has slots for attachment, making it easy to click in bit sets and drills, which makes the set very versatile. The Pick and Click box without content (size M) has one side for storing bits and a window so you can see the contents. It is also equipped with rubber edges that increase protection and robustness in tough environments.Pick and Click Box without content (size M)Can be customized with bit packs

Voor Turbotrimmer Art. Nr. 9805, 9806, 9807, 9808, 9809, 9827, 8846, 8847, 8848,9870 ,9872 ,9874

Bosch 2609256720. Suitable for materials: Chipboard, Construction wood, Construction wood (thick), Roofing board, Softwood. Blade tooth spacing: 4 mm

Diameter mm: 6.0Shaft diameter mm: 6Total length mm: 85Non-ferrous metal | Base metalsPlastic | StyrofoamFerrous metals | Reinforcing steel

Schroevendraaier bit set, 32 stuks, torx, phillips, pozidriv, hex, slot, lengte: 25 mm

Boorset, spiraalboor, 19 stuks

Verzinkboor met carbide snijder en diepteaanslag met beschermende nylon ring

90 graden verzinking
Perfect voor draadloze boormachines
HM-plaat voor optimale duurzaamheid
Geschikt voor hard hout
Verstelbare diepteaanslag
1/4" handvat

Brad nails, 5000 stuks, 2.2 mm, lengte: 40 mm, breedte: 1 mm, voor Makita AF506, AF506N, DBN500RTJ, DBN500ZJ; LXT DBN500Z

Boorstift, hamerboor, 12 mm, SDS-plus, lengte: 215 mm

Router bit set, voor hout, V-groef, duifstaartverbinding, kraalrand, sponningfrees, 22 stuks, cilindrisch

The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly, so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers.
Package with one piece.

6 Wera Impaktor bits netjes gerangschikt in een praktische Bit-Check met minimale ruimte. De Impaktor technologie biedt een bovengemiddelde levensduur, zelfs onder extreme omstandigheden dankzij het best mogelijke gebruik van de materiaaleigenschappen en de geoptimaliseerde geometrie. De bitpunt is bedekt met kleine diamantdeeltjes; dit vermindert het risico op uitglijden uit de schroefkop dankzij de verbeterde wrijvingsweerstand.

Boor, voor metaal, spiraalboor, 10 stuks, 4.5 mm, lengte: 80 mm

Boorstift, hamerboor, 10 mm, SDS-plus, lengte: 215 mm

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 10 pieces.

Bosch Betonboren SDS-Quick

Boorstift, hamerboor, 12 mm, SDS-plus, lengte: 315 mm

Schroevendraaier, boor en dopsleutelset, voor hout, metaal, metselwerk, verzinkboor, spiraalboor, 34 stuks, torx-, phillips-, pozidriv- en sleufkopbits van 7 mm tot 10 mm lang: 25 mm

Schroevendraaier bit, 25 stuks, 1/4", torx, T20, hexagonaal, lengte: 25 mm

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and power drills. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hardness quality, allowing sufficient performance for all tasks. The tapered torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw installation, making it suitable for all tasks. Screwdriver bit pack extra hard (PZ) with 3 pieces

25 traditionele HSS boorsets in praktische opbergdoos, boren van 1-13 mm.

25 HSS boren
1 - 13 mm
Gerolde HSS boren

Boorstift, hamerboor, 8 mm, SDS-plus, lengte: 265 mm

Beton boor

Hogesnelheidsfrees, voor zachthout, hardhout, speedboor, plat, 6 stuks, 25 mm, 13 mm, 20 mm, 16 mm, 22 mm, 19 mm, zeskant