Bosch Boren en bits - pagina 44

Boorstift, voor beton, metselwerk, hamerboor, 20 mm, SDS-plus, lengte: 450 mm

Boorset, voor hout, metaal, steen, 15 stuks, 5 mm, 6 mm, 8 mm, 4 mm en 3 mm

The SDS max-9 Natural Stone drill bit has a long lifespan in natural stone. The drill bit has two main cutting edges and two robust side bolts, which extend the lifespan. The drill bit is made of a high-quality carbide material that ensures long life and great durability. The vibration-optimized design with 2+2 grooves also ensures optimal power transmission during drilling. The drill bit is intended for drilling in natural stone. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, accurate drilling, and efficient fastening. It is compatible with all hammer drills with SDS max holders.
Package of 1 piece.

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the shape of the tip with PointTeQ. It is quick and easy to start drilling, as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm since they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (notched angle) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in drill stands and screwdrivers.
Package of 10 pieces.

For use with bayonet saws with a universal shaft system of 0.5". The S 922 EF Flexible for Metal bayonet saw blade is optimized for a range of different tasks in metal. Its fine tooth height cuts through all materials of normal thickness. The blade is made from BIM (bimetal) and developed for long life when used in standard strength steel. It also has a very fine tooth height (1.4 mm) for use in pipes and profiles with a thickness of 1.5 to 4 mm. The blade has a standard length of 150 mm...

The Impact Control screwdriver bit is very robust and suitable for demanding tasks, and can even withstand the high power of impact wrenches. The bit has an extended torsion zone, which makes it extremely durable for long-term work. Modified S2 steel and an optimized heat treatment process provide extra durability for high performance in construction installations or heavy industrial work. The HEX-9 MultiConstruction hammer drill bit is suitable for virtually all types of materials in indoor work. It has diamond-ground cutting edges with high wear resistance and a U-shape with 2 notches that provide good dust removal and standard life span. In addition, its carbide tip provides easy starting and good control during drilling. The Impact Control Universal Holder Quick Release makes it easy to change bits and holds the bit extra securely during universal use of screwdrivers. A permanent magnet ensures a firm and secure grip on the used bits, while its Quick Release function on the chuck allows quick and easy changes while also providing a firm grip on the bit. It is suitable for all fastening tasks that require power tools.All bits have an external hexagonal shaft of 1/4 inch (6mm)and are suitable for use with drills, screwdrivers,and especially impact wrenches.Bits are part of Bosch's Pick-and-Click system which enables customized accessory sets.The click-fitting system makes it easy to change bits & drills thus getting individualized set.The Bit comes in a plastic holder that clicks into Pick-and-Click boxes without content (size M & L)for various customized Bit sets.
Package includes Pick-and-Click MultiConstruction drill bits & Screwdriver Bits

Router bit set, 15 stuks, 8 mm

Boor, voor hout, zachthout, hardhout, spiraalboor, 4 mm, lengte: 75 mm

Boor, spiraalboor, 13 mm, cilindrisch, lengte: 151 mm

Boorset voor metselwerk, kalksteen, steen, kunststeen, 7 stuks, lengte: 75 mm, 85 mm, 100 mm, 120 mm en 60 mm

Boor, voor metaal, spiraalboor, 11 mm, lengte: 142 mm

Boor, voor metaal, spiraalboor, 12 mm, lengte: 151 mm

Boorset, voor beton, metselwerk, spiraalboor, 5 stuks, 5 mm, 6 mm, 8 mm, 10 mm en 4 mm. Lengte: respectievelijk 75mm ,85mm ,100mm en120mm

Boor, voor hout, centreerpuntboor, 3 mm, lengte: 60 mm

Boor, voor metaal, spiraalboor, 10 mm, cilindrisch, lengte: 133 mm

Boor, spiraalboor, 11 mm, cilindrisch, lengte: 142 mm

Spiraalboor, voor plastic, non-ferrometaal, gietijzer, gegoten staal, gelegeerd staal, ongelegeerd staal, twist bit (spiraalvormige boor), 18 mm diameter en cilindrisch

Boor, spiraalboor, 10,5 mm, cilindrisch, lengte: 133 mm

Boorbitset met 5 stuks voor boren in beton, inclusief diameters 4 mm, 5 mm, 6 mm, 8 mm en 10 mm.

(vertaald naar engels) Bosch Betonboorbitset, 5-delig is een Bosch boorbitset ontworpen voor beton, en biedt je een praktische selectie van gangbare maten in één set.

Diamantboor, voor beton, 4 mm, cilindrisch, lengte: 90 mm

The SDS plus-5 drill bit ensures problem-free drilling. The grooved carbide tip with notches ensures smooth drilling and easily penetrates the material without getting stuck, even in concrete. The Activeteq centering tip guides the drill position from the start without shaking or displacement and ensures precise hole diameter. AWB soldering and hardening technology reduces vibration during drilling work, so the user is not burdened. The drill bit is suitable for masonry and concrete. The visible wear indicator shows if the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill head is made in Germany. Compatible with SDS plus holder rotary hammers.
Package of 1 piece.

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering point of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral drill bit is manufactured according to DIN 338. The type N (notch angle) of the borehead has a 135-degree point and a diameter tolerance of h8. It has a cylindrical shaft system (the shaft has the same diameter as the borehead) and is intended for use in drilling stands and screwdrivers.
Package with one piece.

Bosch 2 609 255 062 drill bit

Boor, voor beton, metselwerk, steen, 8 mm, cilindrisch, lengte: 150 mm

Boorset, voor metaal, spiraalboor, 25 stuks, 1-13 mm, H8, cilindrisch