Bosch Boren en bits - pagina 43

Boorstift, voor beton, metselwerk, versterkt beton, 18 mm, SDS-max, lengte: 940 mm

Boor, voor beton, metselwerk, hamerboor, 10 mm, SDS-plus, lengte: 315 mm

The long ground HSS spiral drill bit for drilling deep holes through metal with maximum precision. Its length allows for deep drilling with this long drill head. The drill head's exposed 135-degree two-part self-centering tip combines active cutting with perfect centering without displacement for maximum precision. With the two-part tip, it is also unnecessary to mark pilot holes in advance or pilot bore up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. The long ground HSS spiral drill bit is manufactured according to DIN 340. The drill head is of type N (not angle) with a 135-degree tip and a diameter tolerance of h8. This drill head is designed for drilling deep holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. It has a cylindrical shaft system (the shaft has the same diameter as the drill head) and is intended for use in boring stands and screwdrivers
Package with one piece.

The drill bit has a hexagonal shaft system and is compatible with all screwdrivers with a 13 mm chuck. The spiral drill bit is suitable for quick and precise drilling when drilling through holes, pre-drilling for rafter nails, and drilling deep dowel holes in wood. The powerful self-feeding tip pulls the bit all the way through, ensuring fast and precise drilling with low power consumption. The optimized low-friction geometry of the bit with solid core ensures straight holes, high chip removal, and higher working speed. The optimized guide edge of the bit and precision-ground head cutting edge produce precise holes. Suitable for use in construction trades, carpenters, roofers, and is suitable for both softwood and hardwood.Spiral drill set with 6 pieces

Gatenzaagset met 8 diameters (25, 32, 38, 44, 51, 57, 63, 68 mm) voor zagen in hout en geselecteerde kunststoffen.

Bosch 8-delige gatenzaagset ondersteunt werkzaamheden in zachthout, spaanplaat, constructiehout en gelamineerde platen/sandwichpanelen, evenals kunststoffen zoals PP, PE, isolatiemateriaal en acrylglas (PM).

The SDS plus-9 Rebar Cutter drill head is specially developed for drilling in reinforced concrete. The drill head's solid carbide teeth have a special shape that ensures optimal drilling speed and durability. The design of the drill head with 2+2 deep grooves ensures optimal dust removal and long life. Furthermore, the design is vibration-optimized, ensuring optimal power transmission and speed. The drill head also has a ventilation hole for heat dissipation and removal of metal chips. Drilling in reinforced concrete should always be done in consultation with a building engineer. It is compatible with SDS plus holders on rotary hammers and should be used without impact function.
Package with 1 piece.

Cirkelzaagblad, voor hout, plastic, aluminium, non-ferrometaal, epoxy, schuurmaterialen, 250 mm, 80 tanden

Boorstift, voor spaanplaat, zachthout, spaanplaat, speedboor, 40 mm, zeskant, lengte: 400 mm

Boor- en bitset van Bosch geleverd in een V-Line box met 83 delen.

Bosch V-Line box met 83 delen is een praktische set voor georganiseerde opslag en gemakkelijke toegang tot je bits en accessoires, met Bosch als fabrikant.

Beitelset, plat, punt, spade, 3 stuks, SDS-plus

Bosch 2 608 690 237 accessoire voor boorhamer Boorhamer beitelvoorzetstuk

The SDS plus-9 Rebar Cutter drill bit is specially designed for drilling in reinforced concrete. The drill bit's solid carbide teeth have a special shape that ensures optimal drilling speed and durability. The design of the drill bit with 2+2 deep grooves ensures optimal dust removal and long life. Furthermore, the design is vibration-optimized, ensuring optimal power transmission and speed. The drill bit also has a ventilation hole for heat dissipation and removal of metal chips. Drilling in reinforced concrete should always be done in consultation with a building engineer. It is compatible with SDS plus holders on rotary hammers and should be used without impact function.
Package contains 1 piece.

Boor, spiraalboor, 2 stuks, cilindrisch, lengte: 49 mm

Boor, voor beton, metselwerk, 8 mm, SDS-plus, lengte: 465 mm

Boor, voor beton, metselwerk, 10 mm, SDS-plus, lengte: 465 mm

Boor, voor beton, metselwerk, hamerboor, 16 mm, SDS-plus, lengte: 315 mm

Boor, voor plastic, non-ferrometaal, gietijzer, gietstaal, spiraalboor, 5 stuks, 5 mm, 6 mm, 4 mm ,3 mm ,2mm , cilindrisch

Boorstift, 5 stuks, 12 mm, cilindrisch, lengte: 151 mm

Router bit set, 12 stuks, 8 mm

The drill bit is equipped with a cylindrical shaft system. The dowel drill bit ensures precise drilling in both soft and hard wood and can be used for both through holes and pocket holes. The extremely sharp drill head with centering point makes it possible to place the hole precisely. High-quality support cutters with precise edges produce splinter-free holes. The two flutes of the bit prevent material from clogging the hole, ensuring good material removal and a precise result. The drill bit can be used for drilling in both soft and hard wood.
Package of 1 piece.

Boorbitset levert 25 HSS-TiN metaalboren volgens DIN 338 met een cilindrische schacht, met diameters van 1.0 tot 13.0 mm.

Bosch HSS-TiN, DIN 338 is ontworpen voor het boren in metaal, inclusief ferrometalen en plaatmetaal, en bevat meerdere boorlengtes (34–151 mm) om aan verschillende boortaken te voldoen.

It has a cylindrical shaft system (the shaft has the same diameter as the drill head) and is intended for use in drilling stands and screwdrivers. The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree two-part self-centering tip of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the two-part tip, it is also unnecessary to mark center points in advance or pilot bore up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral drill bit is manufactured according to DIN 338. The type N (notch angle) of the drill head has a 135-degree tip and a diameter tolerance of h8.
Metal Drill Set HSS-G with five parts, point angle 135° ,1/4" hexagonal shank

Routerbit, voor hout, Romeinse Ogee, 42.9 mm, lengte: 60 mm, breedte: 15.1 mm