Bosch Boren en bits

Bosch Dubbelboor van metaal Ø4.0x55mm, 10 stuks

The ground HSS drill bit with double end has twice the lifespan. Both ends of the drill bit can be used thanks to two drill heads and notches. It is suitable for assembly work, bodywork, and metal processing. It can also be used for drilling in tiles or threading holes in thin-walled materials. Use this drill bit for drilling in non-ferrous metal, sheet steel, and plastic. The drill head is also extra short and stable for drilling in tight spaces. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip where marking with a center punch is unnecessary. It is intended for handheld drills (screwdrivers) and drilling stands.
Package of 10 pieces.

33,52 € (27,70 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch CYL-5

The CYL-5 drill bit head guarantees extra long lifespan when drilling in concrete and stone. The carbide material developed by Bosch combined with diamond-ground cutting edges provides an extremely durable drill bit head. The variable design with 2 grooves and a short, variable slope significantly reduces groove friction and ensures effective dust removal and less wear. The Bosch Power Grip shaft system enables 100% power transmission from the machine to the drill bit head, so that the power is optimally utilized directly for the drilling task, and reduced power loss means less wear. For drilling fixing holes in concrete, natural stone, and artificial stone materials. The drill bit head is PGM certified by the PGM Masonry Drill Bit Association Board guaranteeing tight tolerances, accurate boreholes, and efficient fastening. The drill bit head is compatible with cylindrical shaft systems for all powered and battery-powered hammer drills.
CYL-5 Concrete Drill Bit Set with 3 pieces

12,41 € (10,26 €)

Bestelproduct, 7 - 8 werkdagen levertijd

Bosch SDS-plus-5

The SDS plus-5 drill bit guarantees trouble-free drilling. The grooved carbide tip with notches ensures smooth drilling and easily penetrates the material without getting stuck, even in concrete. The Activeteq centering tip guides the drill position from the start without shaking or displacement and ensures precise hole diameter. AWB soldering and hardening technology reduces vibration during drilling work, so the user is not burdened. The drill bit is suitable for masonry and concrete. The visible wear indicator shows if the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill head is made in Germany. Compatible with SDS plus holder rotary hammers.
Package of 10 pieces.

54,41 € (44,97 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch Expert CYL-9 MultiConstruction

Boorstift, voor beton, plastic, staal, zachthout, soft tile, multimaterial, 10 stuks, 5 mm, cilindrisch, lengte: 85 mm

46,03 € (38,04 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch HAMMERBOR PLUS-7X 17X215MM

Boorstift, voor beton, metselwerk, versterkt beton, graniet, gneis, hamerboor, 17 mm, SDS-plus, lengte: 215 mm

30,70 € (25,37 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch FRÆSER SKIVENOT M.KLEJE HM 8X9.6X4MM

Routerbit, voor massief hout, hardhout, samengesteld hout, sleufsnijder, 32 mm, lengte: 51 mm

27,58 € (22,79 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch drill bit - for softwood hardwood

Boorstift, voor zachthout, hardhout, avegaarbit, 8 mm, zeskant, lengte: 450 mm

17,35 € (14,34 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch BITSSÆT MED KARABINHAGE 21DELE FUCHSIA

Schroefbitset, 21 stuks, torx, phillips, pozidriv, hex, slot

12,08 € (9,98 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch FRÆSER V-NOT HM 8 mm Ø 11 mm L 14 mm 6

Routerbit, voor hout, V-groef, 11 mm, lengte: 45 mm

17,10 € (14,13 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch METALBORSÆT HSS-CO 25 STK

Boorset voor metaal, 25 stuks

86,85 € (71,78 €)

Extern magazijn, 5 - 6 werkdagen levertijd

Bosch drill bit - for wood softwood hardwood

Boorstift, voor hout, zachthout, hardhout, houtboor, cilindrisch, lengte: 250 mm

21,26 € (17,57 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch BOOR CILINDER MULTICONSTRUCTIE 6X100MM 10 STUKS

Boorstift, voor beton, plastic, staal, zachthout, soft tile, multimaterial, 10 stuks, 6 mm, cilindrisch, lengte: 100 mm

45,86 € (37,90 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch FORSTNERBOR HM 40MM

This hinge cutter bit is equipped with a cylindrical shaft system and is intended for use with portable screwdrivers and drill stands. The carbide hinge cutter bit ensures precise results in abrasive materials. The bit's special properties make it the preferred tool of machine carpenters and carpenters, especially in the production of windows, doors, and kitchens. The bit, which is made with tungsten diamond-ground carbide cutters, achieves impressive results. In addition, the centering point guarantees a perfect start to drilling, and the two primary and two secondary side cutters effortlessly cut through materials to achieve extremely precise and splinter-free bottom hole diameters. The bit is particularly suitable for abrasive materials on hard wood, plywood, chipboard, and fiberboard.
Package contains 1 piece.

64,81 € (53,56 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch HULSAV POWERCHANGE MULTI 44MM

Gatenzaag, voor bakstenen, spaanplaat, zachthout, plastic verstevigd met glasvezel, soft tile, 44 mm

20,91 € (17,28 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch FORSTNERBOR HM 30MM

This hinge cutter bit is equipped with a cylindrical shaft system and is intended for use with portable screwdrivers and drill stands. The carbide hinge cutter bit ensures precise results in abrasive materials. The bit's special properties make it the preferred tool of machine carpenters and carpenters, especially in the production of windows, doors, and kitchens. The bit, which is made with tungsten diamond-ground carbide cutters, achieves impressive results. In addition, the centering point guarantees a perfect start to drilling, and the two primary and two secondary side cutters effortlessly cut through materials to achieve extremely precise and splinter-free bottom hole diameters. The bit is particularly suitable for abrasive materials on hard wood, plywood, chipboard, and fiberboard.
Package contains 1 piece.

45,06 € (37,24 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch METALBOR HSS-CO S 11X142MM 5STK

The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers.
Package with 5 pieces.

46,50 € (38,43 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch HAMMERBOR SDS P-5 6.5X485X550MM

The SDS plus-5 drill bit ensures problem-free drilling. The grooved carbide tip with notches ensures smooth drilling and easily penetrates the material without getting stuck, even in concrete. The Activeteq centering tip guides the drill position from the start without shaking or displacement and ensures precise hole diameter. AWB soldering and hardening technology reduces vibration during drilling, so the user is not burdened. The drill bit is suitable for masonry and concrete. The visible wear indicator shows if the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill head is made in Germany. Compatible with SDS plus holder rotary hammers.
Package of 1 piece.

36,72 € (30,35 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch HULSAV POWERCHANGE MULTI 48MM

Gatenzaag, voor bakstenen, spaanplaat, zachthout, plastic verstevigd met glasvezel, soft tile, 48 mm

34,99 € (28,92 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch BITS PH2 25MM 1/4 STANDARD 2STK

Schroefbit Standard PH met PH-schroefkop, maat 2, en 25 mm lengte voor compatibele Phillips-bevestigers.

Standard PH schroefbit is gespecificeerd met PH-symbool/schroefkop en schroefkopmaat 2, met een bitlengte van 25 mm voor gebruik waar dit Phillips-profiel vereist is.

4,46 € (3,69 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch drill bit - for softwood hardwood

Boorstift, voor zachthout, hardhout, avegaarbit, 14 mm, zeskant, lengte: 450 mm

24,53 € (20,27 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch BOR Hex MULTICONSTRUCTION 8X100MM

Boorstift, voor beton, plastic, staal, zachthout, soft tile, multimaterial, 8 mm, lengte: 100 mm

7,74 € (6,40 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch Extra Harde Schroevendraaier Bit Pz 4 32mm 25 stuks.

Bosch Bit extra-hard

19,38 € (16,02 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch HULSAV POWERCHANGE MULTI 140MM

Gatenzaag, voor bakstenen, spaanplaat, zachthout, plastic verstevigd met glasvezel, soft tile, 140 mm

57,14 € (47,22 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch HULSAV POWERCHANGE SHEET CARBIDE 51MM

Gatenzaag, voor steel sheets, stainless steel sheets, 51 mm

38,94 € (32,18 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch HAMMERBOR PLUS-7X 14X265MM

Boorstift, hamerboor, 14 mm, SDS-plus, lengte: 265 mm

20,72 € (17,12 €)

Extern magazijn, 5 - 6 werkdagen levertijd

Maandag - Donderdag:	09:00 - 12:00
Vrijdag:	Gesloten
Weekend en Deense feestdagen:	Gesloten

Telefoon:	085 301 55 55
Email particulier:	[email protected]
Email zakelijk:	[email protected]

Bosch Boren en bits - pagina 46

Bosch Dubbelboor van metaal Ø4.0x55mm, 10 stuks

Bosch CYL-5

Bosch SDS-plus-5

Bosch Expert CYL-9 MultiConstruction

Bosch HAMMERBOR PLUS-7X 17X215MM

Bosch FRÆSER SKIVENOT M.KLEJE HM 8X9.6X4MM

Bosch drill bit - for softwood hardwood

Bosch BITSSÆT MED KARABINHAGE 21DELE FUCHSIA

Bosch FRÆSER V-NOT HM 8 mm Ø 11 mm L 14 mm 6

Bosch METALBORSÆT HSS-CO 25 STK

Bosch drill bit - for wood softwood hardwood

Bosch BOOR CILINDER MULTICONSTRUCTIE 6X100MM 10 STUKS

Bosch FORSTNERBOR HM 40MM

Bosch HULSAV POWERCHANGE MULTI 44MM

Bosch FORSTNERBOR HM 30MM

Bosch METALBOR HSS-CO S 11X142MM 5STK

Bosch HAMMERBOR SDS P-5 6.5X485X550MM

Bosch HULSAV POWERCHANGE MULTI 48MM

Bosch BITS PH2 25MM 1/4 STANDARD 2STK

Bosch drill bit - for softwood hardwood

Bosch BOR Hex MULTICONSTRUCTION 8X100MM

Bosch Extra Harde Schroevendraaier Bit Pz 4 32mm 25 stuks.

Bosch HULSAV POWERCHANGE MULTI 140MM

Bosch HULSAV POWERCHANGE SHEET CARBIDE 51MM

Bosch HAMMERBOR PLUS-7X 14X265MM