Bosch Boren en bits - pagina 42

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The bit's tapered torsion zone easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill bit is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill bit's efficient U-shape with 2 flutes ensures effective dust removal, less friction, reduced heat development and wear, and extends the life of the drill bit. The drill bit provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill bit is PGM-certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill bit is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Robust Line Concrete Drill Bit Set CYL-3 with 5 pieces

Routerbit, voor hout, massief hout, hardhout, samengesteld hout, Dado, 20 mm, lengte: 56 mm

Routerbit, voor zachthout, hardhout, 13 mm, lengte: 51 mm

Schroefbit met T-schroefkop, maat 25, en 25 mm lengte voor compatibele schroefwerkzaamheden.

Standaard T schroefbit is gespecificeerd met een T (Torx) schroefkop, schroefkopmaat 25 en 25 mm lengte, waardoor het eenvoudig is de bit af te stemmen op de vereiste schroefkop en toepassing.

Metaalborenset met HSS-G-ontwerp volgens DIN 338, 3 mm diameter en geschikt voor gietijzer, metaal, kunststof en roestvrij staal.

Bosch Metaalboor HSS-G, DIN 338 is ontworpen voor normaal gebruik met een boormachine en bevat 2 boren met een werklengte van 3.3 cm.

Schroevendraaier, boor en dopsleutelset, voor hout, metaal, metselwerk, verzinkboor, spiraalboor, 34 stuks, torx-, phillips-, pozidriv- en sleufkopbits van 7 mm tot 10 mm lang: 25 mm

Drill bit set, for wood, brad point bit, 5 pieces, 5 mm, 6 mm, 8 mm, 10 mm, 4 mm

Beitel, voor metselwerk, mortel, spade, SDS-max, lengte: 400 mm, breedte: 115 mm

Schroevendraaier bit, 25 stuks, 1/4", torx, T20, hexagonaal, lengte: 25 mm

The CYL-3 drill head ensures long-lasting performance when drilling in concrete. The wear-resistant drill head is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill head's efficient U-shape with 2 notches ensures effective dust removal, less friction, reduced heat generation and wear, and extends the life of the bit. The drill head provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling, and efficient fastening. The drill head is compatible with the cylindrical shaft system for all powered and battery-powered hammer drills.
Concrete Drill Set CYL-3 with 5 pieces

Boorstift, voor beton, metselwerk, versterkt beton, 10 stuks, 8 mm, SDS-plus, lengte: 165 mm

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the shape of the tip with PointTeQ. It is quick and easy to start drilling, as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm since they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (notched angle) with a 135-degree point angle. It has a cylindrical shank system (the same diameter as hammer drills) and is intended for use in drill stands and screwdrivers.
Pack of 10 pieces.

The Impact Control screwdriver bit is very robust and suitable for demanding tasks, and can even withstand the high power of impact wrenches. The bit has an extended torsion zone, which makes it extremely durable for long-term work. Modified S2 steel and an optimized heat treatment process provide extra durability for high performance in plant installations or heavy industrial work. The set of Pick and Click screwdriver bits with Impact Control in 36 pieces also includes sockets as well as the Impact Control Universal Holder Standard Magnetic and Impact Control Universal Holder Quick Release. These holders provide extra grip on the bit when mounting screws with power tools, while the Quick Release function allows for quick and easy changes. The screwdriver bit is part of the Bosch Pick and Click system, which allows for customized accessory sets. The click-fitting system makes it easy to change bits and drills to create an individually tailored set. The bit comes in a plastic holder that can easily be clicked into empty Pick-and-Click boxes (size M & L) for customized bit sets. It has an external hexagonal shaft of 1/4 inch for use with screwdrivers, especially impact wrenches.
Package with 8 pcs (index)

Screwdriver and drill bit set, for wood, metal, masonry, 30 pieces, torx, phillips, pozidriv, slot, length: 25 mm

Eccentrische bevestiging
Optimaal voor schroefwerk dicht bij de rand
Past op Bosch accu-schroevendraaier IXO III, IXO IV en IXO V.

Schroevendraaier met bitset

Boorstift, voor beton, versterkt beton, hamerboor, 32 mm, SDS-max, lengte: 720 mm

3 x Bosch professional screwdriver bit PZ insert bit – PZ1, PZ2, PZ3, length 25 mm, hex shank

Hamerboor met SDS plus-schacht, 4 mm diameter, 100 mm werklengte en 160 mm totale lengte voor het boren in steen, metselwerk, graniet en beton, inclusief gewapend beton.

Bosch Hammer Drill Bit SDS plus is ontworpen voor compatibele SDS plus-boorhamers en biedt het opgegeven boorbereik en een passende aansluiting voor gangbare harde bouwmaterialen.

Boorstift, voor spaanplaat, zachthout, spaanplaat, speedboor, 18 mm, zeskant, lengte: 400 mm

Diamantboorset, voor beton, 7 stuks, 5 mm, 6 mm, 8 mm, 10 mm, 4 mm lengte:100mm ,90mm ,150mm