Bosch Boren en bits - pagina 41

Boorstift, voor beton, metselwerk, versterkt beton, 14 mm, SDS-max, lengte: 340 mm

Bosch HSS spiraalboren geslepen

The impact control screwdriver bit is very robust and can withstand even the high power of impact screwdrivers

25 mm schroevendraaierbit, 2xPZ2

Boorstift, voor beton, metselwerk, versterkt beton, 10 stuks, 10 mm, SDS-plus, lengte: 265 mm

Boorstift, voor beton, metselwerk, 18 mm, SDS-plus, lengte: 200 mm

Doosboor, voor beton, metselwerk, kalksteen, 100 mm, lengte: 72 mm

Beitel, voor beton, bakstenen, solid brick, concrete building block, sand brick, lime brick, plat, 10 stuks, SDS-max, lengte: 400 mm

Beitel, punt, SDS-max, lengte: 400 mm (pak van 10)

Boor- en bitset in metaal, 35-delige assortimentsset geleverd in een dispenser van Bosch.

Bosch Drill/Bit Set Metal 35 Pieces Dispenser is een compacte Bosch set die is ontworpen om boren en bits bij elkaar te houden in één praktische metalen dispenser voor eenvoudige opslag en hantering.

Display

It has a 1/4 in. External hex shank for use with drill drivers, screwdrivers and especially impact screwdrivers. The very robust Impact Control screwdriver bit is even suitable for the high torque of impact screwdrivers. The special torsion zone gives the bit an extremely high durability for continuous use, the S2-modified steel and the optimized heat treatment process enable maximum performance under the harshest conditions. This product is perfectly suitable for heavy tasks such as extensive assembly or heavy industrial work.

Bosch 2 609 255 126 schroevendraaierbit 1 stuk(s)

Schroefbit, 100 stuks, 1/4", phillips, PH2, zeskant, lengte: 25 mm

Decoupeerzaagbladenset met 3 stuks en T-schacht, settype Extra-Clean voor hardhout, ontworpen voor het zagen van hout inclusief hard/massief hout en akoestische panelen.

Bosch Decoupeerzaagbladenset met 3 stuks, T-schacht bevat 2 x T 308 BF en 1 x T 308 BOF, waardoor je een praktische selectie hebt voor houtbewerkingsklussen waarbij een schoon resultaat vereist is.

Schroevendraaierbit voor Pozidriv (PZ) kruiskopschroeven met PZ2-kopmaat en 49 mm lengte voor compatibele schroeftaken.

Bosch schroevendraaierbit voor Pozidriv kruiskopschroeven (PZ) is een Bosch-bit ontworpen voor PZ-schroefkoppen, gespecificeerd als maat 2 en uitgevoerd in een lengte van 49 mm.

Platte spadeboor heeft een Self Cut-ontwerp met een diameter van 30.0 mm en een 6.35 mm zeskantschacht.

Bosch Self Cut Flat Spade Bit, hex shank is gespecificeerd met een werklengte van 112 mm en een totale lengte van 152 mm, en is bedoeld voor gebruik met beton, cellenbeton, hout en akoestische panelen.

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The tapered torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks. Drive unit ISO 1173 C6.3, 1/4" external hexagon

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures fast chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 10 pieces.

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 5 pieces.

The CYL-5 drill bit head guarantees extra long lifespan when drilling in concrete and stone. The Bosch-developed carbide material combined with diamond-ground cutting edges provides an extremely durable drill bit head. The variable design with 2 flutes and short, variable pitch significantly reduces flute friction and ensures efficient dust removal and less wear. The Bosch Power Grip shank system enables 100% power transmission from the machine to the drill bit head, so that the power is optimally utilized directly for the drilling task, and reduced power loss means less wear. For drilling fixing holes in concrete, natural stone, and artificial stone material. The drill bit head is PGM-certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, accurate boreholes, and effective fastening. The drill bit head is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package of 1 piece.

Bosch 2 609 256 915 drill bit 1 pc(s)

Metaalboorset met 6 HSS-G boren volgens DIN 338 met cilindrische schacht in de maten 2.0, 3.0, 4.0, 5.0, 6.0 en 8.0 mm.

Bosch 6-delige Metaalboorset HSS-G, DIN 338 is ontworpen voor werk in ferrometalen zoals staal/ijzer, gelegeerd en ongelegeerd staal, grijs gietijzer en plaatmetaal, en kan ook worden gebruikt op kunststoffen, waaronder piepschuim.