Bosch Boren en bits - pagina 21

Boorstift, voor spaanplaat, zachthout, spaanplaat, speedboor, 19 mm, zeskant, lengte: 400 mm

Compatible with SDS plus holder rotary hammers. The SDS plus-5 drill head guarantees problem-free drilling. The grooved carbide tip with notches ensures smooth drilling and easily penetrates the material without getting stuck, even in concrete. The Activeteq centering tip guides the drill position from the start without shaking or displacement and ensures precise hole diameter. AWB soldering and hardening technology reduces vibration during drilling work, so the user is not burdened. The drill bit is suitable for masonry and concrete. The visible wear indicator shows if the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by PGM Masonry Drill Bit Association Board and guarantees tight tolerances, accurate drilling, and efficient fastening. The drill head is made in Germany.
Robust Line hammer set SDS plus-5 with 5 pieces

Boor, voor metaal, spiraalboor, 10 stuks, 5 mm, lengte: 86 mm

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures fast chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 10 pieces.

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures fast chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 5 pieces.

Boorstift, voor beton, metselwerk, versterkt beton, 24 mm, SDS-max, lengte: 520 mm

It has a 1/4 inch hex shank for use with common battery-powered screwdrivers and impact wrenches with a 1/4 inch tool holder. The magnetic universal holder, standard, is a good choice for universal applications of screwdrivers. The product's slim design makes it easy to handle for various tasks. A permanent magnet ensures a firm and secure grip on the bits during use. The universal holder is suitable for all fastening jobs that require power tools. It has an external hexagonal shank of 1/4 inch and is intended for use with screwdrivers, screw machines, and drywall screwdrivers with depth stops.
Universal holder with permanent magnet, without spring ring

Boorstift, voor beton, versterkt beton, kalksteen, metselwerk, 40 mm, SDS-max, lengte: 520 mm

The drill bit is equipped with a cylindrical shaft system. The machine-driven drill bit enables precise drilling results in soft and hard wood, especially for deep dowel holes. Split-free holes, for example in timber, are drilled using the finely ground drill bit tip with two guide edges. The centering point makes it possible to place the hole precisely and thus achieve precise results. The special groove ensures efficient removal of chips and prevents jamming while achieving an accurate hole diameter. The drill bit can be used for soft and hard wood.
Total length 400 mm

Schroefbitset, 37 stuks, lengte: 75 mm

Beitel, voor mortel, punt, SDS-plus, lengte: 200 mm, breedte: 32 mm

Boor, voor beton en metselwerk, 6.5 mm, SDS-plus, lengte: 265 mm

Boor, voor tegels, 8 mm, lengte: 80 mm

Boorset, voor beton, metselwerk, gewapend beton, 3 stuks, 6 mm, 8 mm, 10 mm, SDS-plus aansluiting en lengte van 160 mm

Boor, spiraalboor, 12 mm, cilindrisch, lengte: 151 mm

Boor, spiraalboor, 10 mm, cilindrisch, lengte: 400 mm

This drill head is compatible with a 1/4 inch hexagonal shaft system for versatile use with screwdrivers, impact wrenches, and drill stands. The Impact Control HSS spiral bit provides extremely robust drilling in metal, especially with screwdrivers. The extremely strong core is extremely robust. The spiral hammer bit is precision ground from solid metal and has an oxidized notch that gives it outstanding surface quality for cutting through materials with reduced wear. It is suitable for use on alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, non-ferrous metals, sheet metal and plastic.
Package of 1 piece.

Boorset voor metaal, 13 stuks

The CYL-9 Ceramic tile drill head is a standard drill head for drilling in tiles. The practical drill head is suitable for dry drilling without cooling. The simple design without notches is particularly suitable for drilling in soft to medium-hard tiles. Drilling without impact function at low speeds. The drill head is compatible with power and battery-powered drills with a cylindrical shaft system. Package of 1 piece.

Drill bit, twist bit, 8.5 mm, cylindrical, length: 117 mm

Diamantboor, voor beton, 6 mm, cilindrisch, lengte: 150 mm

Boor, voor keramiek, 10 mm, cilindrisch, lengte: 90 mm

Boor, voor metaal, spiraalboor, 13 mm, lengte: 151 mm

Boor, voor plastic, non-ferrometaal, gietijzer, gegoten staal, ongelegeerd staal, spiraalboor, 16 mm, cilindrisch