Bosch Boren en bits - pagina 23

Doosboor, voor beton, metselwerk, kalksteen, 50 mm, SDS-max

Doosboor, voor beton, metselwerk, kalksteen, 68 mm

Doosboor, voor beton, metselwerk, kalksteen, 82 mm, SDS-max

Doosboor, voor beton, metselwerk, kalksteen, 90 mm, SDS-max

Doosboor, voor beton, metselwerk, kalksteen, 150 mm

Doosboor, voor beton, metselwerk, kalksteen, 30 mm, SDS-plus, lengte: 72 mm

Schroevendraaier bit, 3 stuks, 1/4", torx, T25, lengte: 25 mm

The CYL-9 Ceramic tile drill head is a standard drill head for drilling in tiles. The practical drill head is suitable for dry drilling without cooling. The simple design without notches is particularly suitable for drilling in soft to medium-hard tiles. Drilling without impact function at low speeds. The drill head is compatible with power and battery-powered drills with a cylindrical shaft system. Package of 1 piece.

Boor- en beitelset, voor beton, metselwerk, hamerboor, 11-delig, 5 mm, 6 mm, 8 mm, 10 mm, 12 mm, SDS-plus, lengte: 160 mm, 110 mm, 250 mm

Schroefbitset voor interne Torx (T) schroeven, met 5 standaard bits in de maten T10, T15, T20, T25 en T30 met 25 mm lengte en 1/4" externe zeskantschacht (ISO 1173 C6.3).

Bosch 5-delige schroevendraaierbitset standaard voor interne Torx schroeven (T) biedt een compacte selectie van veelvoorkomende Torx-maten voor compatibele 1/4" zeskant bithouders, waardoor je eenvoudig de juiste bit bij de schroefkop vindt.

• Inbegrepen bits: T10, T15, T20, T25, T30
• Lengte: 25 mm
• Schachttype: 1/4" externe zeskant, ISO 1173 C6.3

Drill bit, for concrete, masonry, hammer bit, 24 mm, SDS-plus, length: 250 mm

This drill head is compatible with a 1/4 inch hexagonal shaft system for versatile use with screwdrivers, impact wrenches, and drill stands. The Impact Control HSS spiral bit provides extremely robust drilling in metal, especially with screwdrivers. The extremely strong core is extremely robust. The spiral hammer bit is precision ground from solid metal and has an oxidized notch that gives it outstanding surface quality for cutting through materials with reduced wear. It is suitable for use on alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, non-ferrous metals, sheet metal and plastic.
Package of 1 piece.

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (notched angle) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in drill stands and screwdrivers.
Package of 10 pieces.

Routerbit, voor zacht massief hout, hard massief hout, houtcomposieten, recht, 15 mm, lengte: 51 mm

Boorstift, voor beton, versterkt beton, graniet, gehard beton, gneis, hamerboor, 8 mm, SDS-plus, lengte: 215 mm (pak van 10)

Compatible with SDS plus holder rotary hammers. The SDS plus-5 drill head ensures seamless drilling. The grooved carbide tip with notches ensures smooth drilling and easily penetrates the material without getting stuck, even in concrete. The Activeteq centering tip guides the drill position from the start without shaking or displacement and ensures precise hole diameter. AWB soldering and hardening technology reduces vibration during drilling work, so the user is not burdened. The drill bit is suitable for masonry and concrete. The visible wear indicator shows if the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill head is made in Germany.
SDS plus-5 hammer drill set with 3 pieces

Boorstift, voor beton, plastic, staal, zachthout, soft tile, multimaterial, 4 mm, cilindrisch, lengte: 75 mm

Boorset, voor beton, metselwerk, kalksteen, steen, kunststeen, 7 stuks: 5 mm, 6 mm, 7 mm, 8 mm ,10mm en 4mm. Lengte:75mm ,85mm ,100mm en120mm

Slijpschijf, voor beton, 125 mm

Beitel, voor beton, metselwerk, punt, SDS-plus, lengte: 250 mm

Bosch 2 608 622 123 spaakwiel & wielborstel 8 cm

Boorstift, spiraalboor, 5 stuks, 8 mm, cilindrisch, lengte: 117 mm

Bosch PRO Wood slangenboor

Boorstift, voor beton, plastic, staal, zachthout, soft tile, multimaterial, 6 mm, zeskant, lengte: 100 mm

Bosch HSS Spiraalboor PointTeQ