Bosch Boren en bits

Bosch Expert SelfCut Speed

Boorstift, voor spaanplaat, zachthout, spaanplaat, speedboor, 8 mm, zeskant, lengte: 152 mm

4,55 € (3,76 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch METALBOR HSS-CO s 3.2X65MM

The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly, so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers.
Package with one piece.

3,74 € (3,09 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch Diamantbor Tør 107x150mm 1/2 Prof

77,84 € (64,33 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch DIAMANTBOR TØR 52X150MM 1/2PROF

56,30 € (46,53 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch SPIRALBOR 16X100X160MM SEKSKANTSKAFT

The drill bit has a hexagonal shank system and is compatible with all screwdrivers with a 13 mm chuck. The spiral drill bit is suitable for quick and precise drilling when drilling through holes, pre-drilling for rafter nails, and drilling deep dowel holes in wood. The powerful self-feeding tip pulls the drill bit all the way through, ensuring fast and precise drilling with low power consumption. The optimized low-friction geometry of the drill bit with solid core ensures straight holes, high chip removal, and higher working speed. The optimized guide edge of the drill bit and precision-ground main cutting edge produce precise holes. Suitable for use in construction trades, by carpenters and roofers, it is suitable for both softwood and hardwood
Total length 160 mm

12,41 € (10,26 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch BOREPATRON SELVSP TIL EASY/PSB 1.5-13MM

Zelfspannende boorkop.

19,90 € (16,45 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch Dieptebegrenzer met bit PH2 1/4

Diepte-aanslag met Phillips (PH2) schroevendraaierbit, ontworpen om de schroefdiepte te controleren met een lengte van 60 mm.

Bosch Diepte-aanslag met schroefbit PH combineert een diepte-aanslag en PH-schroefkopbit maat 2 voor consistent schroeven wanneer herhaalbare diepte belangrijk is.

23,92 € (19,77 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch METALBOR POINTTEC HSS-R 12.7MM 5STK

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 5 pieces.

26,46 € (21,87 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch METALBOR HSS-CO s 9.5X125MM 5STK

The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly, so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers.
Package of 5 pieces.

32,98 € (27,26 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch HAMMERBOR SDS-P P3 4X100/160MM

The SDS plus-3 drill bit has long durability when drilling in reinforced concrete. The Dura design with four grooves ensures increased durability with effective dust removal and reduced heat development. The drill bit is made of high-alloy steel with optimized hardening technology, which increases wear resistance. The serrated cutting edges are made of an extra robust carbide material developed and produced by Bosch. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, precise drilling, and efficient fastening. The drill bit is intended for drilling in concrete and masonry together with SDS plus holders for rotary hammers.
Package contains 1 piece.

5,89 € (4,87 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch BIT T25 L:25 mm 3 STK

Schroevendraaier bit, 3 stuks, 1/4", torx, T25, lengte: 25 mm

4,36 € (3,60 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch METALBOR POINTTEC HSS-R 12.3MM 5 STK: 0 (This is already in Dutch)

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures fast chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 5 pieces.

24,22 € (20,02 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch SDS-Plus-5 Steenboor 7 x 315 mm

Bosch Boren SDS-plus-5

13,04 € (10,78 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch EXPERT SHEET METAL HOLE SAWS FOR ROTARY DRILLS/DRIVERS & IMPACT DRILL/DRIVERS 30MM

Long Life Cutting Holes in Stainless Steel
Exceptional durability is built in with Bosch Carbide Technology.
Individually ground teeth made from fine, hard Carbide.
With integrated thread.

49,11 € (40,59 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch EXPERT SHEET METAL HOLE SAWS DRILLS/DRIVERS & IMPACT DRILLS/DRIVERS

Long life when hole cutting stainless steelExceptional durability is a given with Bosch Carbide Technology.Individually ground teeth made of fine carbide.With integrated thread.

64,96 € (53,69 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch CYL-9

The CYL-9 Ceramic tile drill head is a standard drill head for drilling in tiles. The practical drill head is suitable for dry drilling without cooling. The simple design without notches is particularly suitable for drilling in soft to medium-hard tiles. Drilling without impact function at low speeds. The drill head is compatible with power and battery-powered drills with a cylindrical shaft system.
Tile drill set CYL-9 Ceramic with 5 pieces

31,80 € (26,28 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch NØGLE T.16MM/T.LÅSSIKR.

The reserve key fits toothed chuck drill chucks. It is important to choose the correct key type (A/B/C/D/F/G)

10,01 € (8,27 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch FRÆSER NOT 2 SKÆR HM 8 mm L 20 mm B 11

Routerbit, Recht, 11 mm, lengte: 51 mm

13,89 € (11,48 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch CYL-3

Boorset, voor beton, metselwerk, kalksteen, steen, kunststeen, 7 stuks: 5 mm, 6 mm, 7 mm, 8 mm ,10mm en 4mm. Lengte:75mm ,85mm ,100mm en120mm

18,30 € (15,12 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch SPIRALBOR 6X50X90MM TRÆBOR

Boor, voor zacht hout, hardhout, centreerpuntboor, 6 mm, cilindrisch, lengte: 93 mm

3,40 € (2,81 €)

Extern magazijn, 5 - 6 werkdagen levertijd

Bosch SPIRALBOR 12X85X140MM TRÆBOR

Boor, voor zacht hout, hardhout, brad point boor, 12 mm, cilindrisch, lengte: 151 mm

6,79 € (5,61 €)

Extern magazijn, 5 - 6 werkdagen levertijd

Bosch BITSSÆT IMPACT PH/PZ/TX 50MM QUHOLD 8ST

The set of Pick and Click screwdriver bits with Impact Control in 36 pieces also includes socket wrenches as well as Impact Control Universal Holder Standard Magnetic and Impact Control Universal Holder Quick Release. These holders provide an extra good grip on the bit when mounting screws with power tools, while the Quick Release function allows for quick and easy changes. The screwdriver bit is part of the Bosch Pick and Click system, which enables customized accessory sets. The click-fitting system makes it easy to change bits and drills, thus obtaining an individually tailored set. The bit comes in a plastic holder that can easily be clicked into empty Pick and Click boxes (size M and L) for customized bit sets.
Package of 7 pieces (index)

17,69 € (14,62 €)

Extern magazijn, 5 - 6 werkdagen levertijd

Bosch METALBOR HSS-G 7.1X101MM 10 STK

25,92 € (21,42 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch Robuuste lijn SDS-plus-5

Compatible with SDS plus holder rotary hammers. The SDS plus-5 drill head guarantees problem-free drilling. The grooved carbide tip with notches ensures smooth drilling and easily penetrates the material without getting stuck, even in concrete. The Activeteq centering tip guides the drill position from the start without shaking or displacement and ensures precise hole diameter. AWB soldering and hardening technology reduces vibration during drilling work, so the user is not burdened. The drill bit is suitable for masonry and concrete. The visible wear indicator shows if the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by PGM Masonry Drill Bit Association Board and guarantees tight tolerances, accurate drilling, and efficient fastening. The drill head is made in Germany.
Robust Line hammer set SDS plus-5 with 5 pieces

22,51 € (18,60 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch AV / multimedia paneel SDS-MAX - SDS-PLUS

The drill holder for drill hammers can be converted from an SDS max shaft to an SDS plus hammer drill bit

78,55 € (64,92 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Maandag - Donderdag:	09:00 - 12:00
Vrijdag:	Gesloten
Weekend en Deense feestdagen:	Gesloten

Telefoon:	085 301 55 55
Email particulier:	[email protected]
Email zakelijk:	[email protected]

Bosch Boren en bits - pagina 19

Bosch Expert SelfCut Speed

Bosch METALBOR HSS-CO s 3.2X65MM

Bosch Diamantbor Tør 107x150mm 1/2 Prof

Bosch DIAMANTBOR TØR 52X150MM 1/2PROF

Bosch SPIRALBOR 16X100X160MM SEKSKANTSKAFT

Bosch BOREPATRON SELVSP TIL EASY/PSB 1.5-13MM

Bosch Dieptebegrenzer met bit PH2 1/4

Bosch METALBOR POINTTEC HSS-R 12.7MM 5STK

Bosch METALBOR HSS-CO s 9.5X125MM 5STK

Bosch HAMMERBOR SDS-P P3 4X100/160MM

Bosch BIT T25 L:25 mm 3 STK

Bosch METALBOR POINTTEC HSS-R 12.3MM 5 STK: 0 (This is already in Dutch)

Bosch SDS-Plus-5 Steenboor 7 x 315 mm

Bosch EXPERT SHEET METAL HOLE SAWS FOR ROTARY DRILLS/DRIVERS & IMPACT DRILL/DRIVERS 30MM

Bosch EXPERT SHEET METAL HOLE SAWS DRILLS/DRIVERS & IMPACT DRILLS/DRIVERS

Bosch CYL-9

Bosch NØGLE T.16MM/T.LÅSSIKR.

Bosch FRÆSER NOT 2 SKÆR HM 8 mm L 20 mm B 11

Bosch CYL-3

Bosch SPIRALBOR 6X50X90MM TRÆBOR

Bosch SPIRALBOR 12X85X140MM TRÆBOR

Bosch BITSSÆT IMPACT PH/PZ/TX 50MM QUHOLD 8ST

Bosch METALBOR HSS-G 7.1X101MM 10 STK

Bosch Robuuste lijn SDS-plus-5

Bosch AV / multimedia paneel SDS-MAX - SDS-PLUS