Bosch Boren en bits - pagina 14

This drill head is compatible with a 1/4 inch hexagonal shaft system for versatile use with screwdrivers, impact wrenches, and drill stands. The Impact Control HSS spiral bit provides extremely robust drilling in metal, especially with screwdrivers. The extremely strong core is extremely robust. The spiral hammer bit is precision ground from solid metal and has an oxidized notch that gives it outstanding surface quality for cutting through materials with reduced wear. It is suitable for use on alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, non-ferrous metals, sheet metal and plastic.
Package of 1 piece.

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures fast chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Package contains one piece.

Spiraalboor, voor plastic, non-ferrometaal, gietijzer, gegoten staal, gelegeerd staal, ongelegeerd staal, twist bit (spiraalvormige boor), 17 mm diameter en cilindrisch

The HSS spiral drill PointTeQ with a hexagonal shank provides fast results when drilling in metal. As it is developed for fast drilling, it generates minimal heat with reduced wear on the drill bit, and the PointTeQ tip ensures consistent sharpness and long durability. The self-centering tip prevents wandering and ensures quick and easy starting, and the black oxide channel quickly removes chips. The hexagonal shank makes the drill very stable with a secure locking between the drill bit and chuck, which strengthens the core of the drill bit and reduces the risk of breakage for bits with a diameter under 6 mm, thereby achieving even greater reliability. This PointTeQ drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. With HSS spiral drills PointTeQ active cutting is achieved along with perfect centering thanks to its two-part tip design. It's type N (drill point) boron 135° point angle manufactured according to DIN 338 standards. It's compatible with 1/4 inch hexagonal shank systems for use with impact wrenches , screwdrivers ,and drilling stands.

The SDS plus-5 drill head guarantees trouble-free drilling. The grooved carbide tip with notches ensures smooth drilling and easily penetrates the material without getting stuck, even in concrete. The Activeteq centering tip guides the drill position from the start without shaking or displacement and ensures precise hole diameter. AWB soldering and hardening technology reduces vibration during drilling, so the user is not burdened. The drill is suitable for masonry and concrete. The visible wear indicator shows if the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill head is made in Germany. Compatible with SDS plus holder rotary hammers.
Package of 1 piece.

It is suitable for use with angle grinders. The Dry Speed diamond blade provides long life when dry drilling in hard ceramic materials. Its premium diamonds provide very high drilling speeds, and its vacuum brazing technology ensures a long lifespan. This product is intended for tiles, from soft wall tiles to very hard floor tiles, such as stoneware

The CYL-9 Ceramic tile drill head is a standard drill head for drilling in tiles. The practical drill head is suitable for dry drilling without cooling. The simple design without notches is particularly suitable for drilling in soft to medium-hard tiles. Drilling without impact function at low speeds. The drill head is compatible with power and battery-powered drills with a cylindrical shaft system. Package of 1 piece.

Routerbit, voor hout, massief hout, hardhout, samengesteld hout, Dado, 8 mm, lengte: 70 mm

The long ground HSS spiral drill bit for drilling deep holes through metal with maximum precision. Its length allows for deep drilling with this long drill head. The exposed 135-degree two-part self-centering tip of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the two-part tip, it is also unnecessary to mark pilot holes in advance or pilot bore up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. The long ground HSS spiral drill bit is manufactured according to DIN 340. The type N (notch angle) drill head has a 135-degree tip and a diameter tolerance of h8. This drill head is designed for drilling deep holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. It has a cylindrical shaft system (the shaft has the same diameter as the drill head) and is intended for use in drilling stands and screwdrivers
Package with one piece.

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The tapered torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks. Screwdriver bit package extra hard (mixed) with 3 pieces

This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hardness and enables sufficient performance for all tasks. The tapered torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks. This robust and compact set has a transparent storage box that provides a good overview of the contents as well as secure storage and transport. It has an external hexagonal shaft of 1/4 inch and is designed for universal mounting of screws with screwdrivers and power drills.
Robust Line bit set S extra hard with 8+1 pieces
Bit length 25 mm, ISO 1173 C6.3, with quick-change universal holder

Schroevendraaier bit set, 21 stuks, torx, phillips, pozidriv, hexagonaal, sleuf

Bosch Screw Belts

Routerbit, voor zacht massief hout, hard massief hout, houtcomposieten, recht, 15 mm, lengte: 51 mm

Boorstift, voor beton, versterkt beton, hamerboor, 32 mm, SDS-max, lengte: 520 mm

Bosch 2 608 900 653 slijp-& schuurbenodigdheid voor rotatiegereedschap Tile, Steen Doorslijpschijf

Boschdiamond disc for metal 100x20/16mm

Boorstift, voor spaanplaat, zachthout, spaanplaat, speedboor, 30 mm, zeskant, lengte: 400 mm

Boorstift, voor spaanplaat, zachthout, spaanplaat, speedboor, 38 mm, zeskant, lengte: 152 mm

Boorstift, spiraalboor, 5 stuks, 8 mm, cilindrisch, lengte: 117 mm

Long life when hole cutting stainless steelExceptional durability is a given with Bosch Carbide Technology.Individually ground teeth made of fine carbide.With integrated thread.

Translation: Symbol, screw head: #227054 - 8682 Set contents: PZ1; PZ2; PZ3 Length in mm: 89 Shaft type: 1/4" external hexagon, ISO 1173 E6.3