Bosch Boren en bits - pagina 13

It has an SDS plus shaft and is designed for all hammer drills with SDS plus fittings. The universal holder with quick release makes it easy to change bits and holds the bit extra securely during universal use of screwdrivers. A permanent magnet ensures a firm and secure grip on the bits during use. In addition, a quick release function on the drill chuck allows for quick and easy bit changes, increasing the firm grip on the bit. The universal holder is suitable for all fastening jobs that require power tools.Universal holder
with quick-change chuck and permanent magnet

Boorset voor metaal, 6 stuks, 5 mm, 6 mm, 8 mm, 4 mm, 3 mm, 2 mm

Boorset, voor beton, metselwerk, kalksteen, steen, kunststeen, 7 stuks: 5 mm, 6 mm, 7 mm, 8 mm ,10mm en 4mm. Lengte:75mm ,85mm ,100mm en120mm

The SDS plus-5 drill head guarantees trouble-free drilling. The grooved carbide tip with notches ensures smooth drilling and easily penetrates the material without getting stuck, even in concrete. The Activeteq centering tip guides the drill position from the start without shaking or displacement and ensures precise hole diameter. AWB soldering and hardening technology reduces vibration during drilling, so the user is not burdened. The drill is suitable for masonry and concrete. The visible wear indicator shows if the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill head is made in Germany. Compatible with SDS plus holder rotary hammers.
Package of 1 piece.

Boorset voor metaal, 13 stuks

Boor, voor beton, metselwerk, gewapend beton, 6 mm, SDS-plus, lengte: 215 mm

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures fast chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 10 pieces.

Boor, voor metaal, spiraalboor, 2 stuks, 4 mm, lengte: 75 mm

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill head is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill head's efficient U-shape with 2 notches ensures effective dust removal, less friction, reduced heat generation and wear, and extends the life of the bit. The drill head provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling, and efficient fastening. The drill head is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package contains 1 piece.

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering point of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral drill bit is manufactured according to DIN 338. The type N (notch angle) of the borehead has a 135-degree point and a diameter tolerance of h8. It has a cylindrical shaft system (the shaft has the same diameter as the borehead) and is intended for use in drilling stands and screwdrivers.
Package with one piece.

Routerbit, voor hout, Kerngatfrees, 12 mm, lengte: 40 mm

Boor, spiraalboor, 3 mm, cilindrisch, lengte: 61 mm (pak van 2)

Routerbit, voor zachthout, hardhout, 14 mm, lengte: 51 mm

Boor, voor hout, spiraalboor, 3 mm, cilindrisch, lengte: 61 mm

Routerbit, 8 mm, lengte: 56 mm

Hamerboor SDS plus met 12 mm diameter, 400 mm werklengte en 460 mm totale lengte voor boren in steen, metselwerk, graniet, beton en gewapend beton.

Hamerboor SDS plus is gespecificeerd voor SDS plus-hamerboren en vermeld voor gebruik in gangbare harde bouwmaterialen, met duidelijke maatvoering voor nauwkeurige boorkeuze.

Bosch 2609255934 screwdriver bit 1 pc(s)

Boorstift, voor beton, metselwerk, versterkt beton, 24 mm, SDS-max, lengte: 320 mm

2 x Bosch professionele schroevendraaier bit PH3 inzetbit, lengte 25 mm, zeskantschacht

Goed uitgerust: de impact control insert bit is zeer robuust en ideaal voor zwaar gebruik
Lange levensduur: de speciale torsiezone zorgt voor extreme duurzaamheid bij continu gebruik
Pick and click systeem: vergrendel de bitbundels veilig in de klikgleuven of druk eenvoudig op het ontgrendelingstabblad om te verwijderen en vervangen
Compatibiliteit: de Impact Control schroevendraaierbits zijn ideaal voor gebruik in slagmoersleutels en boormachines
Inhoud van doos: 2 x Bosch professionele schroevendraaierbits, PH1 insertbit, lengte 25 mm, zeshoekige schacht

The SDS max-9 Stone drill bit has a long lifespan in natural stone. The drill bit has two main cutting edges and two robust side bolts, which extend the lifespan. The drill bit is made of a high-quality carbide material that ensures long life and great durability. The vibration-optimized design with 2+2 grooves also ensures optimal power transmission during drilling. The drill bit is intended for drilling in stone. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, accurate drilling, and efficient fastening. It is compatible with all hammer drills with SDS max holders.
Package of 1 piece.

It is compatible with SDS max shaft systems. The SDS max pointed chisel can be used for standard chiseling for various demolition tasks. Its tapered edge allows for precise adaptation work in concrete. The chisel is intended for use in concrete and bricks, including jointing, demolition and adaptation work, as well as renovation of joints and clearing of reinforcements.Pointed Chisel
SDS max pointed chisel for standard chiseling for various demolition tasks in concrete and bricks