Bosch Boren en bits - pagina 12

Drill bit, for metal, twist bit, 10 pieces, 3 mm, hex, length: 72 mm

Boorstift, voor beton, versterkt beton, hamerboor, 32 mm, SDS-max, lengte: 920 mm

Core cutter, for concrete, masonry, limestone, 68 mm, SDS-plus, length: 75 mm

Flap wheel, for wood, metal, polyvinyl chloride (PVC), 60 mm, width: 40 mm, grit: P60

Boorstift, hamerboor, 14 mm, SDS-plus, lengte: 315 mm

Boor, voor metaal, spiraalboor, 10 stuks, 5.5 mm, lengte: 93 mm

The SDS max-7 drill bit is perfect for use at the fastest drilling speeds. The solid S-carbide cutter and angled side cutters provide very fast drilling. The drill head's vibration-optimized notch design provides optimal power transmission and increased speed. The product is suitable for use in concrete and reinforced concrete, limestone, and masonry. The visible wear indicator shows whether the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. It is compatible with SDS max holders on rotary hammers.
Package of 1 piece.

Impact socket bit, six-point, 7 mm, M4, length: 50 mm

The drill bit has a hexagonal shaft system and is compatible with all screwdrivers with a 13 mm chuck. The spiral drill bit is suitable for quick and precise drilling when drilling through holes, pre-drilling for rafter nails, and drilling deep dowel holes in wood. The powerful self-feeding tip pulls the bit all the way through, ensuring fast and precise drilling with low power consumption. The optimized low-friction geometry of the bit with solid core ensures straight holes, high chip removal, and higher working speed. The optimized guide edge of the bit and precision-ground head cutting edge produce precise holes. Suitable for use in construction trades, by carpenters and roofers, it is suitable for both softwood and hardwood
Total length 600 mm

Boorset, voor metaal, spiraalboor, 10 stuks

Bosch SDS-Quick Concrete Drill Bit

Routerbit, voor zachthout, hardhout, afschuining, 23.7 mm, lengte: 54 mm, breedte: 5.5 mm

Bosch SDS-Quick Concrete Drill Bit

Boor, voor metaal, spiraalboor, 10 stuks, 7.5 mm, lengte: 109 mm

This drill head is compatible with a 1/4 inch hexagonal shaft system for versatile use with screwdrivers, impact wrenches, and drill stands. The Impact Control HSS spiral bit provides extremely robust drilling in metal, especially with screwdrivers. The extremely strong core is extremely robust. The spiral hammer bit is precision ground from solid metal and has an oxidized notch that gives it outstanding surface quality for cutting through materials with reduced wear. It is suitable for use on alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, non-ferrous metals, sheet metal and plastic.
Package of 8 pieces (index)

Boor, voor beton, metselwerk, kalksteen, gewapend beton, hamerboor, 35 mm, SDS-max, lengte: 1320 mm

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The tapered torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks.
Drive unit ISO 1173 C6.3, 1/4" external hexagon
with reduced diameter at the bit output, suitable for countersinking screws

Diamantboorset, voor tegels, vloertegels, fijn steengoed, 3 stuks, 6 mm, 8 mm, 10 mm en 13 mm

The adapter is intended for Bosch hammer drills. The self-tightening drill chuck with adapter is a Bosch system drill chuck and is easy to mount and dismount without the use of tools. Designed to easily clamp drills with a diameter of 1.5 to 13 mm and does not require a key. Self-tightening drill chuck with adapter

Routerbit, Recht, 11 mm, lengte: 51 mm

Verstelbare platte boor biedt een boorbereik van 15.0–45.0 mm, 8 mm schacht, en is ontworpen voor gebruik met een boormachine.

Bosch Verstelbare platte boor wordt geleverd als 1 stuk en is geschikt voor middelhard hout en zachthout, met een werklengte van 9 cm voor gecontroleerd boren.

Gatenzaag levert HSS-bimetaal zaagprestaties met een diameter van 73 mm voor bewerking in ferrometalen, staal/ijzer, roestvast staal/Inox, plaatmetaal, houtachtige platen en laminaat/kunststoffen.

HSS-bimetaal gatenzaag is gespecificeerd met diameter 73 mm en is vermeld voor materialen waaronder staal/ijzer metaal, carrosserieplaat, roestvast staal/Inox, vertind plaatstaal, spaanplaat, multiplex/timmerplaat, gelamineerde MDF-plaat, HPL-laminaat, constructiehout en laminaat HPL.

Diameter mm: 10.0Shaft diameter mm: 8Total length mm: 90
Wood|SoftwoodWood|Acoustic panels

Metaalborenset bevat 5 HSS high-speed steel-boren met een 6.35 mm zeskantschacht voor gebruik met een boormachine, geleverd in een draagkoffer.

Bosch Metaalborenset, 5-delig, HSS-G met zeskantschacht omvat boormaten 2, 3, 4, 5 en 6 mm en is geschikt voor ijzer en metaal, plaatmetaal en hard kunststof.