Bosch Boren en bits

Bosch SDS PLUS-3 DRILL HEAD FOR HAMMER DRILL

Bosch 2 608 831 123 niet gecategoriseerd

41,35 € (34,17 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch Diamantboor 35 x 300 mm 1/2" Beste voor beton

Bosch Best for Concrete diamantboorkronen voor nat gebruik G 1/2-inch

150,02 € (123,98 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch BITS R1 XH 1/4 C6.3 25MM 25 STK

19,38 € (16,02 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch HAMMERBOR SDS-P P3 14X300/360MM

The SDS plus-3 drill bit has long durability when drilling in reinforced concrete. The Dura design with four grooves ensures increased durability with effective dust removal and reduced heat development. The drill bit is made of high-alloy steel with optimized hardening technology, which increases wear resistance. The serrated cutting edges are made of an extra robust carbide material developed and produced by Bosch. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, precise drilling, and efficient fastening. The drill bit is intended for drilling in concrete and masonry together with SDS plus holders for rotary hammers.
Package contains 1 piece.

14,06 € (11,62 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch DIAMANTBOR VÅD 57X450MM 1 1/4T BEST C

194,56 € (160,79 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch TRÆSPIRALBOR CV 20 X 250MM

Boor, voor zacht hout, hardhout, centreerpuntboor, 20 mm, cilindrisch, lengte: 250 mm

26,47 € (21,88 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch HAMMERBOR SDS P-5 8.5X210MM

9,49 € (7,84 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch METALBOR HSS-G s 4.8X86MM

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering point of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral drill bit is manufactured according to DIN 338. The type N (notch angle) of the borehead has a 135-degree point and a diameter tolerance of h8. It has a cylindrical shaft system (the shaft has the same diameter as the borehead) and is intended for use in drilling stands and screwdrivers.
Package with one piece.

3,11 € (2,57 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch METALBOR HSS-CO s 6.5X101MM 10STK

The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers.
Package of 10 pieces.

28,50 € (23,55 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch METALBOR HSS-CO s 12.5X151MM 5STK

The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly, so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers.
Package of 5 pieces.

61,46 € (50,79 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch METALBOR HSS-G 7.3X101MM 10 STK

25,92 € (21,42 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch METALBOR HSS-CO s 1.5X40MM 10STK

The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers.
Package of 10 pieces.

10,51 € (8,69 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch METALBOR POINTTEC HSS-R 8.6MM 10STK

18,88 € (15,60 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch BITSHOLDER ONECLICK MAGNET 60MM 10STK

It has an external hexagonal shaft of 1/4 inch and is intended for use with screwdrivers and power drills. The One-Click universal holder makes it easy to change bits with extra secure bit retention for universal use of screwdrivers. It has a One-Click function on the shaft that allows you to change bits with one hand while maintaining a firm grip on the bit. In addition, a permanent magnet ensures a secure grip on the bits during use. The universal holder is suitable for all fastening jobs that require power tools.Universal holderwith one-click function and permanent magnet

89,07 € (73,61 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch BITSSÆT MED KARABINHAGE 21DELE LYSGRØN

Schroevendraaier bit set, 21 stuks, torx, phillips, pozidriv, hexagonaal, sleuf

12,08 € (9,98 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch BITS PZ1/2/3 L:25MM 3 STUKS

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and power drills. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hardness quality, and enables sufficient performance in all tasks. The pointed torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw installation, making it suitable for all tasks. Screwdriver bit pack extra hard (PZ) with 3 pieces

5,90 € (4,88 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch BITS PZ3 L:25MM 3 STUK

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and power drills. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The tapered torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw installation, making it suitable for all tasks. Drive unit ISO 1173 C6.3, 1/4" external hexagon

4,36 € (3,60 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch BITS PZ1 L:25MM 3 STUK

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The tapered torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks. Drive unit ISO 1173 C6.3, 1/4" external hexagon

4,36 € (3,60 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch METALBOR POINTTEC HSS-R 6.1MM 10STK

11,18 € (9,24 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch 0" (This is already in Dutch)

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The tapered torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks. Drive unit ISO 1173 E6.3, 1/4" external hexagon

8,40 € (6,94 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch METALBOR POINTTEC HSS-R 5.6MM 10STK

10,09 € (8,34 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch BITS PH2 L:51MM 3 STUKS

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The tapered torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks. Drive unit ISO 1173 C6.3, 1/4" external hexagon

8,40 € (6,94 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch GIPSSKRUE TRÆ 3.9X25MM 1000STK PH2

Bosch Screw Belts

17,01 € (14,06 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch HAMMERBOR SDS-MAX RAM 32X600X720MM

The SDS max-9 Stone drill bit has a long lifespan in natural stone. The drill bit has two main cutting edges and two robust side bolts, which extend the lifespan. The drill bit is made of a high-quality carbide material that ensures long life and great durability. The vibration-optimized design with 2+2 grooves also ensures optimal power transmission during drilling. The drill bit is intended for drilling in stone. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, accurate drilling, and efficient fastening. It is compatible with all hammer drills with SDS max holders.
Package of 1 piece.

160,97 € (133,03 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Bosch BITS LIGE 1.2X8.0MM 49MM 3 STK

6,88 € (5,69 €)

Extern magazijn, 6 - 7 werkdagen levertijd

Maandag - Donderdag:	09:00 - 12:00
Vrijdag:	Gesloten
Weekend en Deense feestdagen:	Gesloten

Telefoon:	085 301 55 55
Email particulier:	[email protected]
Email zakelijk:	[email protected]

Bosch Boren en bits - pagina 16

Bosch SDS PLUS-3 DRILL HEAD FOR HAMMER DRILL

Bosch Diamantboor 35 x 300 mm 1/2" Beste voor beton

Bosch BITS R1 XH 1/4 C6.3 25MM 25 STK

Bosch HAMMERBOR SDS-P P3 14X300/360MM

Bosch DIAMANTBOR VÅD 57X450MM 1 1/4T BEST C

Bosch TRÆSPIRALBOR CV 20 X 250MM

Bosch HAMMERBOR SDS P-5 8.5X210MM

Bosch METALBOR HSS-G s 4.8X86MM

Bosch METALBOR HSS-CO s 6.5X101MM 10STK

Bosch METALBOR HSS-CO s 12.5X151MM 5STK

Bosch METALBOR HSS-G 7.3X101MM 10 STK

Bosch METALBOR HSS-CO s 1.5X40MM 10STK

Bosch METALBOR POINTTEC HSS-R 8.6MM 10STK

Bosch BITSHOLDER ONECLICK MAGNET 60MM 10STK

Bosch BITSSÆT MED KARABINHAGE 21DELE LYSGRØN

Bosch BITS PZ1/2/3 L:25MM 3 STUKS

Bosch BITS PZ3 L:25MM 3 STUK

Bosch BITS PZ1 L:25MM 3 STUK

Bosch METALBOR POINTTEC HSS-R 6.1MM 10STK

Bosch 0" (This is already in Dutch)

Bosch METALBOR POINTTEC HSS-R 5.6MM 10STK

Bosch BITS PH2 L:51MM 3 STUKS

Bosch GIPSSKRUE TRÆ 3.9X25MM 1000STK PH2

Bosch HAMMERBOR SDS-MAX RAM 32X600X720MM

Bosch BITS LIGE 1.2X8.0MM 49MM 3 STK