Bosch Boren en bits - pagina 11

The Q-Lock adapter with hex holder allows the use of hole saws for power tools with a mandrel. It creates the necessary connection between the hole saw and power tool during cutting. The Q-Lock adapter is a keyless system that is unique in the market for standard hole saws. The adapter can be used with both powered and battery-operated screwdrivers.
Hex adapter for 1/2" and 5/8" threads with HSS-G centering drill (1/4" holder)
Key diameter 9.5 mm, for Ø 14 mm, 9/16" - Ø 210 mm, 8 9/32" (in metal up to Ø152 mm)

Beitel, voor beton, metselwerk, punt, SDS-max, lengte: 400 mm

Boorset, 19 stuks

The drill bit has a hexagonal shaft system and is compatible with all screwdrivers with a 13 mm chuck. The spiral drill bit is suitable for quick and precise drilling when drilling through holes, pre-drilling for rafter nails, and drilling deep dowel holes in wood. The powerful self-feeding tip pulls the bit all the way through, ensuring fast and precise drilling with low power consumption. The optimized low-friction geometry of the bit with solid core ensures straight holes, high chip removal, and higher working speed. The optimized guide edge of the bit and precision-ground head cutting edge produce precise holes. Suitable for use in construction trades, by carpenters and roofers, it is suitable for both softwood and hardwood
Total length 600 mm

Steenborenset met 8 Bosch-boren in maten van 3.0 tot 10.0 mm, ontworpen voor boren in steen, metselwerk, kalkzandsteen, natuursteen, kunststeen, beton en gewapend beton.

Bosch 8-piece Stone Drill Bit Set bevat een praktisch bereik aan diameters—3.0x60, 4.0x75, 5.0x85, 6.0x100, 7.0x100, 8.0x120, 9.0x120 en 10.0x120—zodat je de boor op de taak kunt afstemmen bij het werken in gangbare minerale bouwmaterialen.

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill head is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill head's efficient U-shape with 2 notches ensures effective dust removal, less friction, reduced heat generation and wear, extending the life of the bit. The drill bit provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling and efficient fastening. The drill head is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package contains 1 piece.

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and screw machines. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hard quality and enables sufficient performance in all tasks. The pointed torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw assembly, making it suitable for all tasks.
Screwdriver set extra hard with 11 +1 parts
Bit length 25 mm, ISO 1173 C6.3, with quick-change universal holder

It has an external hexagonal shaft of 1/4 inch and is intended for universal mounting of screws with screwdrivers and power drills. This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hardness quality, and enables sufficient performance in all tasks. The pointed torsion zone of the bit easily handles maximum circumferential speeds when absorbing force and vibrations during screw installation, making it suitable for all tasks. Screwdriver bit pack extra hard (PZ) with 3 pieces

This drill head is compatible with a 1/4 inch hexagonal shaft system for versatile use with screwdrivers, impact wrenches, and drill stands. The Impact Control HSS spiral bit provides extremely robust drilling in metal, especially with screwdrivers. The extremely strong core is extremely robust. The spiral hammer bit is precision ground from solid metal and has an oxidized notch that gives it outstanding surface quality for cutting through materials with reduced wear. It is suitable for use on alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, non-ferrous metals, sheet metal and plastic.
Package of 1 piece.

Boor, voor beton, metselwerk, hamerboor, 15 mm, SDS-plus, lengte: 165 mm

Bosch 2609255083 1 pc(s)

Bosch 2609255023

Metaalboor met HSS-R-ontwerp volgens DIN 338, gemaakt voor gebruik met een boormachine en geschikt voor metaal, kunststof en roestvrij staal.

Bosch HSS-R Metaalboor, DIN 338 heeft een boordiameter van 16.0 mm met een 12 mm schacht, plus een 120 mm werklengte en 178 mm totale lengte voor gecontroleerde boordiepte en reikwijdte.

The SDS plus-5 drill head guarantees trouble-free drilling. The grooved carbide tip with notches ensures smooth drilling and easily penetrates the material without getting stuck, even in concrete. The Activeteq centering tip guides the drill position from the start without shaking or displacement and ensures precise hole diameter. AWB soldering and hardening technology reduces vibration during drilling, so the user is not burdened. The drill is suitable for masonry and concrete. The visible wear indicator shows if the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill head is made in Germany. Compatible with SDS plus holder rotary hammers.
Package of 1 piece.

Diamond core cutter, voor metselwerk, kalksteen, versterkt beton, bakstenen, clinker, 68 mm, M16

The CYL-3 drill bit ensures long-lasting performance when drilling in concrete. The wear-resistant drill head is made of a special carbide material developed and produced by Bosch. The material is designed to withstand frequent use and provides extra durability for tasks in concrete. The drill head's efficient U-shape with 2 notches ensures effective dust removal, less friction, reduced heat generation and wear, and extends the life of the bit. The drill head provides long-lasting performance when drilling fastening holes in abrasive materials such as concrete and natural stone. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, precise drilling, and efficient fastening. The drill head is compatible with the cylindrical shank system for all powered and battery-powered hammer drills.
Package contains 1 piece.

Bosch 2 609 256 904 drill bit 1 pc(s)

Boorset, voor zacht hout, hardhout, centreerpuntboor, 7 stuks, 5 mm, 6 mm, 8 mm, 4 mm, 3 mm ,2mm , zeskant

The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly, so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers.
Package with one piece.

Flap wheel, for wood, metal, polyvinyl chloride (PVC), 60 mm, width: 40 mm, grit: P60

Core cutter, for concrete, masonry, limestone, 68 mm, SDS-plus, length: 75 mm

Drill bit, for metal, twist bit, 10 pieces, 3 mm, hex, length: 72 mm