Vloerverwarming - pagina 5

Uponor Smatrix Wave slave module M-160

SALUS GVU is a complete floor heating shunt solution for underfloor heating with underfloor heating manifold, shunt and circulation pump built together in one unit.Our circulation pump is a 6m pump with capacity up to 16 zones. The underfloor heating manifold is a high flow manifold with manual balancing of each circuit. Each valve has a built-in manual flow control which is very easy to adjust. Instructions on how to balance the circuit can be found in the distributor box.The SALUS GVM floor heating manifold has a manual vent on each pipe and a drain valve with 1/2 ”thread for hose. The Inlet thermostat has a temperature setting of 20 to 55 degrees Celsius. Manifold pipe connection is 1 ", and connection to water for the heat supply is 3/4" socket, and threads to the actuator are 30 x 1.5 mm.

Adapters voor actuators. Voor het monteren van actuators op Pettinaroli verdeelstukken

Thermostatische kop voor 7021.

Compleet aanpassingsset gemaakt van messing voor meerlaagse buis. Niet dezincificeerbaar legering. Geel.

Compleet aanpassingsset gemaakt van messing legering voor polyethyleen buizen. Geel

Voorgemonteerde lineaire verdeelstuk met micrometrische bediening, met thermostatische optie of elektrische regeling, voor retourleidingen. Compressie-einden. Zonder fittingen. 4 uitgangen.

Voorgemonteerde lineaire verdeelstuk met ingebouwde afsluitklep. Micrometrische regeling. Compressie-einden. Zonder fittingen. Geel. 2 uitgangen.

Thermostatische kop met ingebedde externe vloeistofsensor (107LKIT) of externe vloeistofsensor (107LD). Voor minikit.

Thermostatische klep "alleen voor shunt 7021". Hoekventiel van 3/4 inch.

Used for floorheating systems

Used on Roth manifold

Used for floorheating systems

Used on Roth manifold

Used for floorheating systems

Floorheating with high energy efficiency

Used on Roth manifold

Insulated bace module with stainless floor heating manifold incl. Drain, air screw and 20mm connector. Rødgod distributors for domestic water incl. 15mm connector. The base modules have universal adaptation, so they fit the market's well-known brands with easy adjustment. Unique for SALUS base module. Connection at the top from right to left KV Cold water-VV Hot water-VF Heating forward-VR Heating return.Insulated distributors and pipes according to DS452The underfloor heating control is mounted directly on the bottom module DIN.

SALUS GVM-F underfloor heating manifold is a high flow manifold with manual balancing of each circuit.Each zone valve has on the flow pipe a flow meter that can be used for balancing. Alternatively, the built-in manual flow control integrated into the return valve on the return pipe can be used for balancing. Instructions on how to balance the circuit can be found in the distributor box.SALUS GVM-F underfloor heating distributor has a manual vent on each pipe and a drain valve with 1/2 ”thread for hose. Inlet and return pipe connection is 1 ”thread, and the actuator thread is 30 x 1.5 mmContains:Stainless steel manifold set with flow meterEuroconus set for 20 mm PEXVentilation valve on inlet and returnSwivel filling and drain valveMounting brackets for wall mountingWith individual room temperature control. SALUS GVM-F benefits are available with SALUS - wireless control.Properties:Available with SALUS insulation in form-stable EPPComplies with the installation requirements for insulation standard DS 452.Ready for wall mounting.Can be used with water / glycol mixtures with a mixing ratio of up to 30%.Euroconus are included for all inlets and outlets for 20 mm PEX / PE-RT pipe.• Can be integrated into the SALUS Smart Home solution.Can be operated directly from the room thermostat or from the mobile phone, tablet or computer.Benefits are made of stainless steel alloy AISI304 L Premium quality and extruded in dimension1 ”, for optimal distribution and minimum pressure drop.Maximum working pressure: 6 BarMaximum test pressure: 10 bar

Danfoss SSM underfloor heating manifold in stainless steel with output for 5 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Compleet leidingsysteem, in- en uitlaat, inclusief beugels, 20 mm fittingen en eindstukken. 2 uitlaten.

Used for Roth Manifold and Roth controller

Fittting for Roth pipe and manifold

Pump with 6 m lifting height and dimensions 180 mm.The pump is A + rated, that is, power consumption is minimal.

Used for floorheating systems