Vloerverwarming

Danfoss A/S, 082F1071

Danfoss IconTM Zigbee Module, 24V/wireless. Used to connect the Danfoss Icon master controller (088U1141 or 088U1142) to the Zigbee 3.0 network and can thereby be controlled via the Danfoss Ally gateway or a 3rd party Zigbee 3.0 compatible gateway.

Danfoss Icon Master Controller 24V with 10 channels. Underfloor heating control for the Danfoss Icon series with 10 outputs for thermal actuators. Up to 10 room thermostats, wireless/wired, can be registered. The Master Controller must be combined with the Danfoss Icon radio module if wireless room thermostats are to be registered. Automatic balancing, active pump relay, function test and potential-free boiler relay are standard. It is possible to purchase the Danfoss Icon app-module which provides access to app-control of the underfloor heating system via an iOS or Android device. The app-module also provides access to online updating of the Master Controller firmware (OTA). Cooling control and demand-controlled flow temperature can be purchased using the Danfoss Icon expansion module. The Master Controller is compatible with Zigbee 3.0 systems such as Danfoss Ally or 3rd party Zigbee systems. For Zigbee integration, the Danfoss Icon Zigbee module is used, which is connected to the Master Controller's app input.

Pulse R-208 brengt verbinding tot stand tussen Uponor Smatrix Pulse systeem en smartphone/tablet en Uponor cloud remote/lokale toegang via Uponor Smatrix Pulse app (internetverbinding vereist)Functies: tijdelijk wi-fi toegangspunt voor directe toegang (als lokale wi-fi niet beschikbaar is) toegang via lokale wi-fi toegang op afstand via internetverbinding smart home ecosysteem integratie (Amazon Alexa, Google Home, IFTTT) over-the-air updates multi-home controle slimme waarschuwingen via Uponor Smatrix Pulse app toegang van derden voor ondersteuning op afstand (gebruikerstoelage vereist) geschiedenis trendanalyse via Uponor Smatrix Pulse app timer programmering comfort instellingen levering diagnostiek veilige versleutelde verbinding met Uponor cloudContent: Uponor Smatrix com Pulse R-208 adapter voor DIN-rail installaties RJ45 aansluitkabel (1,5m) eerste stap instructies veiligheidsvoorschriften montagemateriaal conformiteit: CE / EAC voeding: RJ45 kabel naar Uponor Wave of Uponor Base controller Pulse ethernet interface: 10/100 Mbps (RJ45) ethernetprotocollen: Ethernet II beschermingsklasse: Klasse II IP20 kleur: wit

For those who want to control the system via a smartphone AppFeatures App module • Wi-Fi connection• Android App• Apple App• Change temperatures• Change time schedule

Uponor Smatrix Wave thermostaat standaard T-165 pod

Quantum SQ610RF is a new smart room thermostat from SALUS. The appearance of the room thermostat is light and simple in a smart thin design. The room thermostat has a built-in rechargeable lithium battery and should not have any batteries changed. The SQ610RF is wireless and fits with a SALUS floor heating system or SALUS Smart Home system. When connected through SALUS Smart Home it is possible to monitor and change the thermostat settings from either PC, Smart Phone or tablet. SALUS Quantum SQ610RF offers the opportunity to increase comfort and reduce energy consumption.

Draadloze kamerthermostaat in wit hoogglans met display en geïntegreerde meting van de relatieve luchtvochtigheid.

Danfoss 088U2120 thermostaat ZigBee Wit

Danfoss Icon2™ Main Controller for underfloor heating control. Basic model, 230V, 15 circuits. Installation, adjustment and handover take place easily with the Danfoss Icon2™ Commissioning App.

Pettinaroli DIRECT bedrade kamerthermostaat zonder display. 24V

Draadloze kamer sensor met geïntegreerde meting van de relatieve luchtvochtigheid.

Used in Roth Basicline floorheating system

Danfoss Zigbee Repeater, 230V/wireless. Used as a network amplifier between the Zigbee gateway and wireless devices. Compatible with Danfoss AllyTM, Danfoss IconTM and 3rd party Zigbee 3.0 systems.

Danfoss Icon2™ TWA Conversion module for converting 230V actuator output to 24V actuator output.

Danfoss TWA-A thermal actuator 24 V NC. The thermal actuator TWA-A range is used with electrical on/off-controls to activate several types of Danfoss valves and floor heating manifolds. The actuator is equipped with a visual position indicator to show the

230 wireless room thermostat for mounting in wall box, for Salus iT600 Heating System. Colour: White.

Used on Roth manifold in systems with Roth controlsystems

Ventilatierooster UPONOR WGF vanaf 1.

Danfoss TWA-A thermische aandrijving 230V NC. De thermische aandrijving TWA-A serie wordt gebruikt met elektrische aan/uit-regelingen om verschillende soorten Danfoss ventielen en vloerverwarmingsverdelers te activeren. De aandrijving is uitgerust met een visuele positie-indicator om de positie van de klep aan te geven

Danfoss 088U2122 thermostaat ZigBee Wit

Voor degenen die de gewenste temperatuur willen instellen en de huidige temperatuur willen zien. Kenmerken draadloze display thermostaten • Temperatuurbereikbeperking • Draadloze tweeweg communicatie • Touchscreen bediening • Pictogram-gebaseerde navigatie • Geruisloos schakelen • Batterij (2 x 1,5V) aangedreven

Salus Smart Home Button, 2- buttons in one.

Digitale bedrade kamerthermostaat voor DIRECT regelsysteem. 24V

Used on Roth manifold