Vloerverwarming - pagina 3

Danfoss IconTM Zigbee Module, 24V/wireless. Used to connect the Danfoss Icon master controller (088U1141 or 088U1142) to the Zigbee 3.0 network and can thereby be controlled via the Danfoss Ally gateway or a 3rd party Zigbee 3.0 compatible gateway.

Quantum SQ610 is a new smart room thermostat from SALUS. The room thermostat look is light and simple in a smart thin design. The room thermostat must be connected to 230V. The SQ610 can be used freely for either wired systems or connected wirelessly to a SALUS floor heating system / SALUS Smart Home system. When connected through SALUS Smart Home it is possible to monitor and change the thermostat settings from either PC, Smart Phone or tablet. The SALUS Quantum SQ610 offers the opportunity to increase comfort and reduce energy consumption.

Thermische actuator voor vloerverwarming van Salus met een normaal gesloten (NC) functie en 24 V AC werking.

Deze Salus thermische telestat is gemaakt voor vloerverwarmingssystemen waarbij een gesloten NC-actuator vereist is.

• Producttype: thermische telestat
• Voor vloerverwarming
• Normaal gesloten (NC)
• 24 V AC

Een eenvoudige keuze voor vloerverwarmingsopstellingen die een Salus 24 V AC NC thermische actuator nodig hebben.

Danfoss ABNM A5 thermische aandrijving. Danfoss ABN A5 (Aan/Uit, 24/120/230V) en ABNM A5 LIN/LOG (0-10V, 24V AC en DC) zijn thermische aandrijvingen voor AB-QM DN10-32 met een slag van 5 mm/6,5 mm, plug-in kabel en IP54 beschikbaar als NC en NO.

Amplifier for Salus iT600 heating system ZigBee signal.

230 wireless 8 zone control box for Salus iT600 underfloor heating system.

Danfoss Icon Master Controller 24V with 15 channels. Underfloor heating control for the Danfoss Icon series with 15 outputs for thermal actuators. Up to 15 room thermostats, wireless/wired, can be registered. The Master Controller must be combined with the Danfoss Icon radio module if wireless room thermostats are to be registered. Automatic balancing, active pump relay, function test and potential-free boiler relay are standard. It is possible to purchase the Danfoss Icon app-module which provides access to app-control of the underfloor heating system via an iOS or Android device. The app-module also provides access to online updating of the Master Controller firmware (OTA). Cooling control and demand-controlled flow temperature can be purchased using the Danfoss Icon expansion module. The Master Controller is compatible with Zigbee 3.0 systems such as Danfoss Ally or 3rd party Zigbee systems. For Zigbee integration, the Danfoss Icon Zigbee module is used, which is connected to the Master Controller's app input.

Danfoss Link HC masterregelaar 10. Draadloze temperatuurregeling - door het hele huis. Danfoss Link is intelligente en draadloze communicatietechnologie aan de binnenkant en stijlvol aan de buitenkant met zijn tijdloze ontwerp. Voor totale controle over uw indeling

Multibox for 1 circuit heating systems

Draadloze kamer sensor met geïntegreerde meting van de relatieve luchtvochtigheid.

The THB23031 is an auto balancing actuator that is used to provide automatic balancing of your underfloor heating circuits. It has two temperature sensors that are connected to the UFH flow and return pipes (inlet and outlet of the UFH manifold). It will continuosly measure the temperatures and adjust the actuator position to maintain the correct temparatur differential between the manifold flow and return pipes (Delta T). This product has an IP54 rating means that the produkt will be protected against contamination from limited amounts of dust and other particles. Additionally, it will be protected from water sprays from all directions. ITG Dresden have confirmed that the Salus THB actuator is equivalent to the hydraulic balancing. In co-operation with ITG Dresden, The Salus THB actuator has been tested and improved. During independent testing it was confirmed that the installation of the Salus THB system in existing underfloor heating system will achieve the same results as a conventional balancing.

Voor degenen die zeer geavanceerde controle-opties willen, inclusief koelbedrijf en regeling van de toevoertemperatuur. Kenmerken uitbreidingsmodule • Vereiste module • Verzendt en ontvangt draadloze signalen tussen kamerthermostaten en Master Controller

Danfoss SSM underfloor heating manifold in stainless steel with output for 9 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Wireless Thermostat with knob

Uponor Fluvia T PUSH 12 WL-G pompunit.

Valve-insert for valve for Salus GVM manifold.

Regeleenheid Wavin Sentio is een 230 V AC regeleenheid geleverd als 8 stuks.

De Wavin Sentio regeleenheid is ontworpen voor gebruik in regel- en besturingsopstellingen waar een Sentio-unit met 230 V AC vereist is.

Een praktische keuze om Wavin Sentio installaties duidelijk te laten aansluiten op het gespecificeerde type regeleenheid.

Roth draadloze regeling voor Minishunt, type Plus

Eindsectie - Eindstukken, beugels en andere accessoires voor de FHF-verzamelleidingserie. Eindstuk met automatische ontluchter.

SALUS GVM-F underfloor heating manifold is a high flow manifold with manual balancing of each circuit.Each zone valve has on the flow pipe a flow meter that can be used for balancing. Alternatively, the built-in manual flow control integrated into the return valve on the return pipe can be used for balancing. Instructions on how to balance the circuit can be found in the distributor box.SALUS GVM-F underfloor heating distributor has a manual vent on each pipe and a drain valve with 1/2 ”thread for hose. Inlet and return pipe connection is 1 ”thread, and the actuator thread is 30 x 1.5 mmContains:Stainless steel manifold set with flow meterEuroconus set for 20 mm PEXVentilation valve on inlet and returnSwivel filling and drain valveMounting brackets for wall mountingWith individual room temperature control. SALUS GVM-F benefits are available with SALUS - wireless control.Properties:Available with SALUS insulation in form-stable EPPComplies with the installation requirements for insulation standard DS 452.Ready for wall mounting.Can be used with water / glycol mixtures with a mixing ratio of up to 30%.Euroconus are included for all inlets and outlets for 20 mm PEX / PE-RT pipe.• Can be integrated into the SALUS Smart Home solution.Can be operated directly from the room thermostat or from the mobile phone, tablet or computer.Benefits are made of stainless steel alloy AISI304 L Premium quality and extruded in dimension1 ”, for optimal distribution and minimum pressure drop.Maximum working pressure: 6 BarMaximum test pressure: 10 bar

Geribbeld polystyreen isolatiepaneel voor vloerverwarmingsbuizen op 300mm h.o.h. Paneelafmetingen 1200 x 790mm, verkrijgbaar in twee diktes: 30 en 50. Wordt gebruikt in combinatie met warmteafgifteplaat 1009132. Toelaatbare oppervlakte per stuk is 0,95 m2 (1,05 stuks/m2).

Used for floorheating systems

Voor degenen die de gewenste temperatuur willen instellen, de huidige temperatuur willen zien en de vloeroppervlaktetemperatuur willen regelen. Kenmerken draadloze display thermostaten• Infrarood vloertemperatuursensor• Temperatuurbereikbeperking• Draadloze tweewegcommunicatie• Touchscreen bediening• Pictogramgebaseerde navigatie• Geruisloos schakelen• Batterij (2 x 1,5V) gevoed

Smart Home RE600 is a repeater that connects wirelessly to your Universal Gateway so it becomes an integral part of your Smart Home system. The RE600 can be used if you have an area in the house where there is a bad signal from your Universal Gateway, or if the range is insufficient.

Uponor Smatrix Wave slave module M-160